dental etching

Summary

Summary: Preparation of TOOTH surfaces, and of materials bonded to teeth or DENTAL IMPLANTS, with agents and methods which roughen the surface to facilitate adhesion. Agents include phosphoric or other acids (ACID ETCHING, DENTAL) and methods include LASERS.

Top Publications

  1. ncbi Microshear bond strength of resin bonding systems to machinable ceramic with different surface treatments
    Xiangfeng Meng
    Department of Prosthodontics, The Stomatological Hospital Affiliated Medical School, Nanjing University, Nanjing, China
    J Adhes Dent 10:189-96. 2008
  2. ncbi Effect of surface treatments on tensile bond strength and on morphology of quartz-fiber posts
    Camillo D'Arcangelo
    Department of Restorative Dentistry, School of Dentistry, University G d Annunzio Chieti, Chieti, Italy
    J Endod 33:264-7. 2007
  3. ncbi Effect of post-space treatment on retention of fiber posts in different root regions using two self-etching systems
    Ling Zhang
    Department of Prosthodontics, School of Stomatology, Fourth Military Medical University, Xi an, China
    Eur J Oral Sci 116:280-6. 2008
  4. ncbi Influence of airborne-particle abrasion on mechanical properties and bond strength of carbon/epoxy and glass/bis-GMA fiber-reinforced resin posts
    Carlos Jose Soares
    Biomechanical Group, Dentistry and Dental Materials School of Dentistry, Federal University of Uberlandia, Uberlandia, Minas Gerais, Brazil
    J Prosthet Dent 99:444-54. 2008
  5. pmc Push-out bond strength of quartz fibre posts to root canal dentin using total-etch and self-adhesive resin cements
    M A Kahnamouei
    Department of Operative Dentistry, School of Dentistry, Tabriz University of Medical Sciences, Gholghasht Street, Daneshghah Avenue, Tabriz, Iran
    Med Oral Patol Oral Cir Bucal 17:e337-44. 2012
  6. ncbi The effect of sandblasting on adhesion of a dual-cured resin composite to methacrylic fiber posts: microtensile bond strength and SEM evaluation
    Ivana Radovic
    Clinic for Pediatric and Preventive Dentistry, Faculty of Dentistry, University of Belgrade, Dr Subotica 11, Beograd 11000, Serbia
    J Dent 35:496-502. 2007
  7. ncbi Two-year clinical performance of two one-step self-etching adhesives in the restoration of cervical lesions
    A Schattenberg
    Clinic for Restorative Dentistry, Johannes Gutenberg University of Mainz, Augustusplatz 2, 55131 Mainz, Germany
    Clin Oral Investig 12:225-32. 2008
  8. ncbi Post-surface conditioning improves interfacial adhesion in post/core restorations
    Francesca Monticelli
    Department of Restorative Dentistry and Dental Materials, University of Siena, Policlinico Le Scotte, Viale Bracci, 53100 Siena, Italy
    Dent Mater 22:602-9. 2006
  9. ncbi Evaluation of the adhesion of fiber posts to intraradicular dentin
    Ceclia Goracci
    Department of Dental Materials, University of Siena, Italy
    Oper Dent 30:627-35. 2005
  10. ncbi Retention and failure morphology of prefabricated posts
    Alireza Sahafi
    Department of Dental Materials, School of Dentistry, University of Copenhagen, Denmark
    Int J Prosthodont 17:307-12. 2004

Research Grants

  1. HYBRIDIZED DENTIN: BIOMIMETIC MODELING AND OPTIMIZATION
    Jayalakshmi Vaidyanathan; Fiscal Year: 2006
  2. Diabetes: Implant Integration, Success, and Benefit
    Thomas W Oates; Fiscal Year: 2010

Detail Information

Publications214 found, 100 shown here

  1. ncbi Microshear bond strength of resin bonding systems to machinable ceramic with different surface treatments
    Xiangfeng Meng
    Department of Prosthodontics, The Stomatological Hospital Affiliated Medical School, Nanjing University, Nanjing, China
    J Adhes Dent 10:189-96. 2008
    ..The bond strength and bond durability of two high-viscosity dual-curing resin luting agents with different surface treatments of ceramic were investigated...
  2. ncbi Effect of surface treatments on tensile bond strength and on morphology of quartz-fiber posts
    Camillo D'Arcangelo
    Department of Restorative Dentistry, School of Dentistry, University G d Annunzio Chieti, Chieti, Italy
    J Endod 33:264-7. 2007
    ..The increase in retentive strength was more remarkable in sandblasted and etched posts. Significant changes of post surfaces were SEM observed after different conditioning treatments...
  3. ncbi Effect of post-space treatment on retention of fiber posts in different root regions using two self-etching systems
    Ling Zhang
    Department of Prosthodontics, School of Stomatology, Fourth Military Medical University, Xi an, China
    Eur J Oral Sci 116:280-6. 2008
    ..A solo irrigation with an EDTA/NaOCl solution resulted in a lower apical push-out strength compared with the other two experimental groups...
  4. ncbi Influence of airborne-particle abrasion on mechanical properties and bond strength of carbon/epoxy and glass/bis-GMA fiber-reinforced resin posts
    Carlos Jose Soares
    Biomechanical Group, Dentistry and Dental Materials School of Dentistry, Federal University of Uberlandia, Uberlandia, Minas Gerais, Brazil
    J Prosthet Dent 99:444-54. 2008
    ..Controversy exists concerning the use of fiber-reinforced posts to improve bond strength to resin cement because some precementation treatments can compromise the mechanical properties of the posts...
  5. pmc Push-out bond strength of quartz fibre posts to root canal dentin using total-etch and self-adhesive resin cements
    M A Kahnamouei
    Department of Operative Dentistry, School of Dentistry, Tabriz University of Medical Sciences, Gholghasht Street, Daneshghah Avenue, Tabriz, Iran
    Med Oral Patol Oral Cir Bucal 17:e337-44. 2012
    ..The aim of the present study was to investigate the push-out bond strengths of quartz fibre posts to root dentin with the use of different total-etch and self-adhesive resin cements...
  6. ncbi The effect of sandblasting on adhesion of a dual-cured resin composite to methacrylic fiber posts: microtensile bond strength and SEM evaluation
    Ivana Radovic
    Clinic for Pediatric and Preventive Dentistry, Faculty of Dentistry, University of Belgrade, Dr Subotica 11, Beograd 11000, Serbia
    J Dent 35:496-502. 2007
    ..To evaluate the influence of different surface treatments on the microtensile bond strength of a dual-cured resin composite to fiber posts...
  7. ncbi Two-year clinical performance of two one-step self-etching adhesives in the restoration of cervical lesions
    A Schattenberg
    Clinic for Restorative Dentistry, Johannes Gutenberg University of Mainz, Augustusplatz 2, 55131 Mainz, Germany
    Clin Oral Investig 12:225-32. 2008
    ..For marginal integrity, anatomic form and surface, significant differences (p<0.05) were found but did not prove statistically significant after Bonferroni adjustment...
  8. ncbi Post-surface conditioning improves interfacial adhesion in post/core restorations
    Francesca Monticelli
    Department of Restorative Dentistry and Dental Materials, University of Siena, Policlinico Le Scotte, Viale Bracci, 53100 Siena, Italy
    Dent Mater 22:602-9. 2006
    ..To verify the influence of different etching procedures of the post-surface on microtensile bond strength values between fiber posts and composite core materials...
  9. ncbi Evaluation of the adhesion of fiber posts to intraradicular dentin
    Ceclia Goracci
    Department of Dental Materials, University of Siena, Italy
    Oper Dent 30:627-35. 2005
    ..The acidic-resin monomers responsible for substrate conditioning in Panavia 21 and RelyX Unicem appeared unable to effectively remove the thick smear layer created on root dentin during post space preparation...
  10. ncbi Retention and failure morphology of prefabricated posts
    Alireza Sahafi
    Department of Dental Materials, School of Dentistry, University of Copenhagen, Denmark
    Int J Prosthodont 17:307-12. 2004
    ..This study evaluated the effect of cement, post material, surface treatment, and shape (1) on the retention of posts luted in the root canals of extracted human teeth and (2) on the failure morphology...
  11. ncbi Microtensile bond strength of a resin cement to feldpathic ceramic after different etching and silanization regimens in dry and aged conditions
    Aline Scalone Brentel
    Sao Paulo State University, Department of Dental Materials and Prosthodontics, Sao Jose dos Campos, Brazil
    Dent Mater 23:1323-31. 2007
    ..This study evaluated the durability of bond strength between resin cement and a feldspathic ceramic submitted to different etching regimens with and without silane coupling agent application...
  12. ncbi The influence of internal surface treatments on tensile bond strength for two ceramic systems
    Vanessa Harumi Kiyan
    Department of Restorative Dentistry, School of Dentistry, University Paulista UNIP, Sao Paulo SP, Brazil
    Oper Dent 32:457-65. 2007
    ..Hydrofluoric acid and sandblasting are well-known procedures for surface treatment; however, surface treatment for high alumina-containing and lithium disilicate ceramics have not been fully investigated...
  13. ncbi Effect of self-etchant pH on the shear bond strength of orthodontic brackets
    Adam W Ostby
    College of Dentistry, University of Iowa, Iowa City, IA 52242 1001, USA
    Am J Orthod Dentofacial Orthop 134:203-8. 2008
    ..Although serving the same purpose, SEPs differ in acidity and aggressiveness. Thus, the purpose of this study was to determine whether the pH of SEPs affects the shear bond strength of orthodontic brackets...
  14. ncbi Effect of three surface treatments on the adhesive properties of indirect composite restorations
    Camillo D'Arcangelo
    Department of Operative Dentistry, Dental School, University of Chieti, Italy
    J Adhes Dent 9:319-26. 2007
    ..The null hypothesis tested was that none of the performed surface treatments would produce greater bond strength...
  15. ncbi Adhesion between dental ceramic and bonding resin: quantitative evaluation by Vickers indenter methodology
    Sylvie Doucet
    Laboratoire de Biomatériaux Université Denis Diderot Paris 7, Assistance Publique Hopitaux de Paris, Paris, France
    Dent Mater 24:45-9. 2008
    ..The purpose of this study was to evaluate the adhesion to dental ceramic by Vickers indenter methodology. This technique allows the creation of adhesive fractures and determines the influence of the surface treatment on adhesive capacities...
  16. ncbi The effect of porcelain surface conditioning on bonding orthodontic brackets
    Raed Ajlouni
    Department of General Dentistry, Baylor College of Dentistry, Dallas, Tex, USA
    Angle Orthod 75:858-64. 2005
    ..2 +/- 4.7 MPa, and for the new self-etching primer/adhesive it was 10.3 +/- 5.3 MPa. The last two groups had the highest bond strength values and were not significantly different from each other...
  17. ncbi Tensile bond strength of self-etching versus total-etching adhesive systems under different dentinal substrate conditions
    Alexandre Henrique Susin
    Department of Restorative Dentistry, Santa Maria University
    Braz Oral Res 21:81-6. 2007
    ..Dry dentin and re-wet produced significantly lower TBS values when using SB. OUBF was not affected by the different conditions of the dentin substrate, producing similar TBS values regardless of the surface pretreatments...
  18. ncbi Effect of surface treatments and bonding agents on the bond strength of repaired composites
    Andrea Nobrega Cavalcanti
    Department of Restorative Dentistry, Piracicaba School of Dentistry, UNICAMP, Piracicaba, SP, Brazil
    J Esthet Restor Dent 19:90-8; discussion 99. 2007
    ..An adequate repair procedure depends on high bond strength between the existing composite and the new composite...
  19. ncbi A comparison between the shear bond strength of brackets bonded to glazed and deglazed porcelain surfaces with resin-reinforced glass-ionomer cement and a bis-GMA resin adhesive
    Abraham B Lifshitz
    Department of Orthodontics, College of Dentistry, Intercontinental University, Mexico City, Mexico
    World J Orthod 7:134-7. 2006
    ..This study compared the shear bond strength of a light-cure resin-reinforced glass-ionomer cement with a bis-GMA light-cure resin system in the bonding of stainless steel brackets to glazed and deglazed porcelain surfaces...
  20. ncbi The effect of thermocycling on the adhesion of self-etching adhesives on dental enamel and dentin
    Alaa Morsy El-Araby
    Department of Dental Biomaterials, Faculty of Dentistry, Alexandria University, Alexandria, Egypt
    J Contemp Dent Pract 8:17-24. 2007
    ..The effect of thermocycling on the adhesion was also investigated. The null hypothesis tested was thermocycling would not affect bond strengths to enamel and dentin treated with self-etching adhesives or a total-etch adhesive...
  21. ncbi Effects of surface treatment on the microtensile bond strength of ceramic materials to dentin
    Walison A Vasconcellos
    Dentistry Department, School of Dentistry, The University of Montes Claros, Minas Gerais, Brazil
    Acta Odontol Latinoam 20:103-7. 2007
    ..Ceramic materials with different chemical formulations and applications yielded significantly different bond strengths to human dentin and must receive distinct surface treatments accordingly...
  22. ncbi Bonding of one-step and two-step self-etching primer adhesives to dentin with different tubule orientations
    Olabisi Asande Adebayo
    School of Dental Science, The University of Melbourne, Victoria, Australia
    Acta Odontol Scand 66:159-68. 2008
    ..To determine the microshear bond strengths of five 'all-in-one' adhesives and two 2-step self-etching primer adhesives to dentin with different tubule orientations and to compare bond strengths between the adhesives...
  23. ncbi The influence of dental unit waterline cleaners on composite-to-dentin bond strengths
    Andre V Ritter
    Department of Operative Dentistry, University of North Carolina School of Dentistry, Chapel Hill, USA
    Dent Assist 77:4-6, 8-9, 12. 2008
    ..Yet, there is concern that these cleaners might affect the bonding of resin-based composites to enamel and dentin. The authors evaluated the influence of DUWL cleaners on composite-to-dentin bond strengths...
  24. ncbi Effect of different surface treatments on the repair bond strength of indirect composites
    Evelise M Souza
    School of Dentistry, Pontifical Catholic University of Parana, Curitiba, Brazil
    Am J Dent 21:93-6. 2008
    ..To evaluate the tensile bond strength of indirect composites repaired with different surface treatments and direct composites...
  25. ncbi Can previously bleached teeth be bonded safely using self-etching primer systems?
    Tancan Uysal
    Department of Orthodontics, Faculty of Dentistry, Erciyes University, Kayseri, Turkey
    Angle Orthod 78:711-5. 2008
    ..To test the null hypothesis that there is no statistical significance in (1) bond strength and (2) failure site location with bleached and unbleached enamel prepared with Transbond Plus Self-etching Primer between different time intervals...
  26. ncbi Resistance to thermo-mechanical stress of different coupling agents used as intermediate layer in resin-fiber post bonds
    Francesca Monticelli
    Department of Dental Materials, School of Dentistry, University of Granada, Spain
    Am J Dent 20:416-20. 2007
    ..To evaluate the microtensile bond strength (MTBS) of different coupling agents used in fiber post-composite bonds to withstand different in vitro challenging procedures...
  27. ncbi Shear bond strength between feldspathic CAD/CAM ceramic and human dentine for two adhesive cements
    Lorenzo Graiff
    Department of Restorative Dentistry, University of Padova, Institute of Clinical Dentistry, Padova, Italy
    J Prosthodont 17:294-9. 2008
    ..In addition, the effect of a silane coupling agent on bond strength was evaluated...
  28. ncbi Effect of Er:YAG laser treatment on the microstructure of the dentin/adhesive interface after acid-base challenge
    Ahmed Samir Bakry
    Cariology and Operative Dentistry, Department of Restorative Sciences, Graduate School, Tokyo Medical and Dental University, Tokyo, Japan
    J Adhes Dent 9:513-20. 2007
    ..The aim of this study was to evaluate the effect of Er:YAG laser ablation on the microstructure of the dentin/adhesive interface after acid-base challenge in vitro...
  29. ncbi Surface conditioning of a composite used for inlay/onlay restorations: effect on muTBS to resin cement
    Luiz Felipe Valandro
    Department of Restorative Dentistry, School of Dentistry, Federal University of Santa Maria, Brazil
    J Adhes Dent 9:495-8. 2007
    ..To assess the effect of the composite surface conditioning on the microtensile bond strength of a resin cement to a composite used for inlay/onlay restorations...
  30. ncbi Effect of surface treatment on roughness and bond strength of a heat-pressed ceramic
    Mohamed F Ayad
    Section of Restorative Dentistry, Prosthodontics, and Endodontics, College of Dentistry, University of Tanta, Tanta, Egypt
    J Prosthet Dent 99:123-30. 2008
    ..Various ceramic surface treatments have been advocated which produce different topographies and bond strengths, but little information is available to identify the interaction between the resulting surface topography and bond strength...
  31. ncbi The influence of dentin and/or metal surface treatment on the retention of cemented crowns in teeth with an increased taper
    Raphael Pilo
    Department of Oral Rehabilitation, The Maurice and Gabriela Goldschleger School of Dental Medicine, Tel Aviv University, Tel Aviv, Israel
    Dent Mater 24:1058-64. 2008
    ..To evaluate the effect of dentin and/or metal surface treatments on retention of cast crowns cemented to preparations with compromised retention...
  32. ncbi Comparison of bonding ability of single-step self-etching adhesives with different etching aggressiveness to root dentin
    Andrea V Kaneshiro
    Department of Restorative Dentistry and Endodontology, Osaka University Graduate School of Dentistry, 1 8 Yamadaoka, Suita, Osaka 565 0871, Japan
    Dent Mater J 26:773-84. 2007
    ..For restorations on root dentin using single-step adhesives, "strong" systems were thus recommended as they favorably produced a stable bond since the early stage...
  33. ncbi Effect of a new thermal cycling method on bond strength of two-step self-etching adhesive systems
    Takashi Nakata
    Department of Restorative Dentistry, Division of Oral Health Science, Graduate School of Dental Medicine, Hokkaido University, Kita ku, Kita 13 Nishi 7, Sapporo 060 8586, Japan
    Dent Mater J 26:635-41. 2007
    ..Therefore, this new thermal cycling method is a potentially useful and accessible means to evaluate the durability of dentin adhesive systems...
  34. ncbi Effect of adhesive application methods on bond strength to bovine enamel
    Susumu Ando
    Department of Operative Dentistry, Nihon University School of Dentistry, Tokyo, Japan
    J Oral Sci 50:181-6. 2008
    ..From the results of this study, active application of single-step self-etch adhesive may help to ensure the creation of a roughened enamel surface and enhance the penetration of resin monomer into the subsurface demineralized enamel...
  35. ncbi A comparison of the retention of three endodontic dowel systems following different surface treatments
    William P Kelsey
    Creighton University School of Dentistry, Omaha, NE 68178, USA
    J Prosthodont 17:269-73. 2008
    ..The purpose of this in vitro study was to evaluate the effect of two surface treatments on the retention of three types of dowels placed into prepared canals with a resin cement...
  36. ncbi The evaluation of bond strength of a composite and a compomer to white mineral trioxide aggregate with two different bonding systems
    Emine Sen Tunc
    Department of Pediatric Dentistry, University of Ondokuz Mayis, Samsun, Turkey
    J Endod 34:603-5. 2008
    ..The placement of composite (Z250) and compomer materials (Dyract AP), used with total-etch one-bottle adhesive (Single Bond), over WMTA as final restoration may be appropriate...
  37. ncbi Shear bond strength of direct composite repairs in indirect composite systems
    Andre Pontes Pontes
    Department of Prosthodontics, Pontifical Catholic University, Porto Alegre, RS, Brazil
    Gen Dent 53:343-7. 2005
    ..5 mm/min. Groups treated with aluminum oxide sandblasting or CoJet Sand had the highest mean values of shear bond strength with no statistically significant difference between the two techniques...
  38. ncbi Tensile bond strength of composite to air-abraded dentin
    Birgit Geitel
    Department of Operative and Preventive Dentistry and Endodontics, Humboldt University, Berlin Charité, Germany
    Oper Dent 29:69-74. 2004
    ..The light microscopic evaluation showed mainly adhesive and combined adhesive-cohesive fractures. Significantly more adhesive fractures could be observed between abraded dentin and composite than between etched dentin and composite...
  39. ncbi Influence of acid-base conditioning on the bond strength of five luting agents employing self-etching primer to enamel and dentin
    Rie Yokomichi
    Division of Fixed Prosthodontics and Oral Rehabilitation, Nagasaki University Graduate School of Biomedical Science, 1 7 1, Sakamoto, Nagasaki 852 8588, Japan
    Dent Mater J 24:232-7. 2005
    ..Highest bond strength to dentin (19.7 MPa) was obtained when self-etching primer containing ferric chloride (EDFe/Super-Bond) was used, but additional PA-AD conditioning significantly weakened the bonding (12.6 MPa)...
  40. ncbi Shear bond strength and SEM evaluation of composite bonded to Er:YAG laser-prepared dentin and enamel
    William J Dunn
    Director of Research and Biomaterials, Wilford Hall Medical Center, 1615 Truemper Street, Lackland Air Force Base, TX 78236, USA
    Dent Mater 21:616-24. 2005
    ..The microstructure of resin-tooth interfaces was also investigated...
  41. ncbi Bond strength of resin cement to dentin and to surface-treated posts of titanium alloy, glass fiber, and zirconia
    Alireza Sahafi
    Department of Dental Materials, School of Dentistry, University of Copenhagen, Copenhagen, Denmark
    J Adhes Dent 5:153-62. 2003
    ..To determine the effect of surface treatments on bond strength of two resin cements (ParaPost Cement and Panavia F) to posts of titanium alloy (ParaPost XH), glass fiber (ParaPost Fiber White), and zirconia (Cerapost), and to dentin...
  42. ncbi Microtensile bond strength testing of luting cements to prefabricated CAD/CAM ceramic and composite blocks
    Ahmed A El Zohairy
    Department of Dental Materials Science, Academic Center for Dentistry Amsterdam ACTA, Louwesweg 1, 1066 EA Amsterdam, The Netherlands
    Dent Mater 19:575-83. 2003
    ..To investigate the Microtensile bond strength (microTBS) and failure mode of resin cements bonded to composite and ceramic CAD/CAM blocks following various surface treatments...
  43. ncbi Microtensile bond strengths to enamel of self-etching and one bottle adhesive systems
    P Pilecki
    Microscopy and Imaging, GKT Dental Institute, King s College London, Guy s Hospital, London Bridge, London, UK
    J Oral Rehabil 32:531-40. 2005
    ..Fluorescence images demonstrated interfacial characteristics consistent with the failure modes observed. Significance: bond strength was not influenced by the use of self-etch or one bottle adhesives...
  44. ncbi The effects of XeCl laser etching of Ni-Cr alloy on bond strengths to composite resin: a comparison with sandblasting procedures
    Andrea K Murray
    School of Physics and Astronomy, University of Manchester, Manchester M13 9PL, UK
    Dent Mater 21:538-44. 2005
    ..The aim of this study was to determine the effect of laser surface treatment of Ni-Cr alloy on the tensile bond strength of a proprietary composite resin (Panavia 21) in comparison with a conventional sandblasting technique...
  45. ncbi Effect of air-powder polishing on dentin adhesion of a self-etching primer bonding system
    Kozo Nishimura
    Cariology and Operative Dentistry, Department of Restorative Sciences, Graduate School, Tokyo Medical and Dental University, Japan
    Dent Mater J 24:59-65. 2005
    ..SEM observation of air-polished dentin surfaces showed that dentin surfaces air-polished with SB were roughened and covered with a smear layer, while those with CC were smooth and the smear layer was removed...
  46. ncbi The influence of cement lute, thermocycling and surface preparation on the strength of a porcelain laminate veneering material
    Owen Addison
    Biomaterials Unit, School of Dentistry, University of Birmingham, St Chads Queensway, Birmingham B4 6NN, UK
    Dent Mater 20:286-92. 2004
    ..The purpose of the current study was to examine the impact of thermocycling on the development of surface flaws on the cemented surfaces of PLV restorations prepared by acid-etching or alumina (Al2O3) abrasion...
  47. ncbi Ultrastructural correlates of in vivo/in vitro bond degradation in self-etch adhesives
    N Donmez
    Faculty of Dentistry, Selcuk University, Konya, Turkey
    J Dent Res 84:355-9. 2005
    ..There is no difference between the mechanism of degradation of self-etch adhesives in vivo or in vitro...
  48. ncbi Bond strengths of current adhesive systems on intact and ground enamel
    Pisol Senawongse
    Department of Operative Dentistry, Mahidol University, Mahidol, Thailand
    J Esthet Restor Dent 16:107-15; discussion 116. 2004
    ..The goal of this study was to compare the microshear bond strengths of current adhesive systems to intact and ground enamel surfaces...
  49. ncbi EDTA treatment improves resin-dentin bonds' resistance to degradation
    R Osorio
    Department of Dental Materials, School of Dentistry, University of Granada, 18014 Granada, Spain
    J Dent Res 84:736-40. 2005
    ..After NaOCl immersion, only specimens subjected to EDTA demineralization maintained the initial bond strength. We conclude that the collagen network is better-preserved after EDTA demineralization...
  50. ncbi Effect of surface treatment of prefabricated posts on bonding of resin cement
    Alireza Sahafi
    Department of Dental Materials, School of Dentistry, University of Copenhagen, Copenhagen, Denmark
    Oper Dent 29:60-8. 2004
    ..The bonding of both resin cements to zirconia posts was improved by Cojet treatment, while sandblasting, followed by silane application, improved bonding of Panavia F...
  51. ncbi Effect of surface conditioning methods on the bond strength of luting cement to ceramics
    Mutlu Ozcan
    Department of Dentistry and Oral Hygiene, Faculty of Medical Sciences, University of Groningen, Antonius Deusinglaan 1, 9713 AV, Groningen, The Netherlands
    Dent Mater 19:725-31. 2003
    ..This study evaluated the effect of three different surface conditioning methods on the bond strength of a Bis-GMA based luting cement to six commercial dental ceramics...
  52. ncbi Incompatibility of self-etch adhesives with chemical/dual-cured composites: two-step vs one-step systems
    C Cheong
    Pediatric Dentistry and Orthodontics, University of Hong Kong, Hong Kong SAR, China
    Oper Dent 28:747-55. 2003
    ..Both features were absent along the resin-dentin interfaces when chemical-cured composites were coupled to the two-step self-etch adhesives...
  53. ncbi Influence of pulse frequency Er:YAG laser on the tensile bond strength of a composite to dentin
    Mariane Gonçalves
    Department of Dental Materials and Prosthesis, Faculty of Dentistry of Ribeirao Preto, University of Sao Paulo, Av do Cafe, S N MonteAlegre, Ribeirão Preto Cep 14040 904, SP, Brazil
    Am J Dent 18:165-7. 2005
    ..To evaluate the influence of different pulse frequencies of Er:YAG laser on the tensile bond strength of a composite to dentin...
  54. ncbi Qualitative assessment of surface topography of XeCl laser etched Ni-Cr alloy
    Andrea K Murray
    Laser Photonics Group, Department of Physics and Astronomy, University of Manchester, Oxford Road, Manchester M13 9PL, UK
    Dent Mater 21:837-45. 2005
    ..The etched surfaces were examined using optical and electron microscopy techniques...
  55. ncbi Ultra-morphology of self-etching adhesives on ground enamel: a high resolution SEM study
    Lorenzo Breschi
    Clinica Odontostomatologica, Department of Surgical Sciences, University of Trieste, Via Stuparich, 1, 34129, Trieste, Italy
    Am J Dent 16:57A-62A. 2003
    ..To evaluate the effect of different commercial self-etching agents on enamel morphology using high-resolution in-lens scanning electron microscopy (FEISEM)...
  56. ncbi Resin-enamel bonds made with self-etching primers on ground enamel
    Masanori Hashimoto
    Division of Pediatric Dentistry, Hokkaido University, Graduate School of Dental Medicine, Sapporo, Hokkaido, Japan
    Eur J Oral Sci 111:447-53. 2003
    ..The morphological features of the resin-enamel bonds produced by two self-etching primers tested were different from that created with the total-etch adhesive...
  57. ncbi Influence of etching with erbium, chromium:yttrium-scandium-gallium-garnet laser on microleakage of class V restoration
    Juliana Marotti
    Department of Prosthodontics, School of Dentistry, University of Sao Paulo, Sao Paulo 05508 000, SP, Brazil
    Lasers Med Sci 25:325-9. 2010
    The aim of this in vitro study was to evaluate some parameters of dental etching when irradiated with an erbium, chromium:yttrium-scandium-gallium-garnet (Er,Cr:YSGG) laser...
  58. ncbi Fusion sputtering for bonding to zirconia-based materials
    Moustafa N Aboushelib
    Dental Biomaterials Department, Faculty of Dentistry, Alexandria University, Egypt
    J Adhes Dent 14:323-8. 2012
    ..To evaluate the influence of fusion sputtering on zirconia-resin microtensile bond strength after 6 months of water storage...
  59. ncbi Surface characterisation and bonding of Y-TZP following non-thermal plasma treatment
    Guilherme B Valverde
    Piracicaba School of Dentistry UNICAMP Brazil, Department of Prosthodontics and Operative Dentistry, Tufts University, School of Dental Medicine, Boston, MA, USA
    J Dent 41:51-9. 2013
    ..2) To test the microtensile bond strength (MTBS) of Y-TZP bonded to cured composite disks, after a combination of different surface conditioning methods...
  60. ncbi Effect of a new method to simulate pulpal pressure on bond strength and nanoleakage of dental adhesives to dentin
    Victor Pinheiro Feitosa
    Department of Restorative Dentistry, State University of Campinas, Piracicaba, Brazil
    J Adhes Dent 14:517-24. 2012
    ..To evaluate a new method of simulated pulpal pressure in vitro in comparison with the conventional one...
  61. ncbi In vitro shear bond strength of resin-based luting cements to dentin
    Maria Jacinta Moraes Coelho Santos
    Division of Restorative Dentistry, Schulich School Medicine and Dentistry, University of Western Ontario, Canada
    Gen Dent 60:e215-20. 2012
    ..5 mm/min until failure. Conventional resin cement and a bonding agent exhibited significantly higher shear bond strength values than all other materials tested...
  62. ncbi Microleakage of Er:YAG laser and dental bur prepared cavities in primary teeth restored with different adhesive restorative materials
    Ali Baghalian
    Department of Pediatric Dentistry, Dental School, Qazvin University of Medical Sciences, Qazvin, Iran
    Lasers Med Sci 28:1453-60. 2013
    ..The degree of microleakage in class V cavities was affected by the type of adhesive restorative materials, type of self-etching adhesive, cavity margin location, and tooth preparation method either by Er:YAG laser or dental bur...
  63. ncbi Shear bond strength of orthodontic brackets bonded to deciduous teeth with different etching times
    E S J Abu Alhaija
    Department of Preventive Dentistry, Jordan University of Science and Technology, Irbid, Jordan
    Eur J Paediatr Dent 13:203-8. 2012
    ....
  64. ncbi Comparison of the shear bond strength of orthodontic brackets in bonding and rebonding: preparation with laser versus conventional acid etch technique
    Morteza Oshagh
    Department of Orthodontics, Faculty of Dentistry, Shiraz University of Medical Sciences, Shiraz, Iran
    Photomed Laser Surg 31:360-4. 2013
    ..The purpose of this study was to compare the bond strength of orthodontic brackets using laser versus acid etching...
  65. ncbi Dentin bond strength: influence of Er:YAG and Nd:YAG lasers
    Carolina Ferraz Ribeiro
    Sao Jose dos Campos School of Dentistry, UNESP Sao Paulo State University, Sao Paulo, Brazil
    Int J Periodontics Restorative Dent 33:373-7. 2013
    ..It was concluded that conventional etching with 37% phosphoric acid yielded significantly higher bond strength values compared to thermal etching with the Er:YAG laser. The Nd:YAG laser did not significantly influence the bond strength...
  66. ncbi Adhesiveness of various glass ionomer cements in cavities treated with Carisolv
    Yoshishige Yamada
    Department of Endodontics, Showa University School of Dentistry, 2 1 1 Kitasenzoku, Ohta ku, Tokyo 145 8515, Japan
    J Clin Pediatr Dent 37:183-7. 2012
    ..The purpose of this study was to investigate the adhesion of glass ionomer cements to dentin and the effect of pretreatment using Carisolv...
  67. ncbi Fracture toughness of two dentin adhesives
    Kimberly Howard
    Department of Operative Dentistry, College of Dentistry, Box J 0446, Gainesville, FL 32610 0446, USA
    Dent Mater 26:1185-92. 2010
    ..Test the hypothesis that a self-etching adhesive is more likely to fail at the dentin-adhesive interface than an etch-and-rinse adhesive...
  68. ncbi Dental implant thread pitch and its influence on the osseointegration process: an in vivo comparison study
    Ester Orsini
    Department of Human Anatomical Sciences and Physiopathology of Locomotor Apparatus, University of Bologna, Bologna, Italy
    Int J Oral Maxillofac Implants 27:383-92. 2012
    ..Two different implant profiles were compared to evaluate the influence of thread pitch on the osseointegration process in bone of low density and limited height...
  69. ncbi In vivo monitoring of the bone healing process around different titanium alloy implant surfaces placed into fresh extraction sockets
    John S Colombo
    Mineralised Tissue Group, Tissue Engineering and Reparative Dentistry, School of Dentistry, Cardiff University, Heath Park, Cardiff, CF14 4XY, UK
    J Dent 40:338-46. 2012
    ..This study investigated the influence of three clinically employed implant surfaces on the early bone healing events in vivo...
  70. ncbi Opaque layer firing temperature and aging effect on the flexural strength of ceramic fused to cobalt-chromium alloy
    Luis Gustavo Oliveira de Vasconcellos
    Department of Dental Materials and Prosthodontics, State University of Sao Paulo, Sao Jose dos Campos, Brazil
    J Prosthodont 19:471-7. 2010
    ..The hypotheses were that higher opaque layer temperatures increase the metal/ceramic bond strength and that aging reduces the bond strength...
  71. ncbi Influence of ceramic (feldspathic) surface treatments on the micro-shear bond strength of composite resin
    Sumit Yadav
    Department of Orthodontics, Indiana School of Dentistry, Indianapolis, IN, USA
    Angle Orthod 80:577-82. 2010
    ..To test the null hypothesis that surface treatment has no influence on the micro-shear bond strength between orthodontic composite resin cement and ceramics (feldspathic porcelain)...
  72. ncbi Effects of different luting agents on bond strengths of fiber-reinforced composite posts to root canal dentin
    Tina Rödig
    Department of Operative Dentistry, Preventive Dentistry and Periodontology, Georg August University, Gottingen, Germany
    J Adhes Dent 12:197-205. 2010
    ..To evaluate the bond strength between two fiber posts (FRC Postec and DT Light Post) and different composite resins following different surface treatments of the posts...
  73. ncbi Comparison of the effects of Er,Cr:YSGG laser and different cavity disinfection agents on microleakage of current adhesives
    Soley Arslan
    Department of Restorative Dentistry and Endodontics, School of Dentistry, Erciyes University, Kayseri, Turkey
    Lasers Med Sci 27:805-11. 2012
    ..In the self-etch group there were differences in microleakage depending on the disinfection agent used...
  74. ncbi Microtensile bond strength of an etch-and-rinse adhesive to enamel and dentin after Er:YAG laser pretreatment with different pulse durations
    Esra Firat
    Department of Restorative Dentistry, Hacettepe University, School of Dentistry, Ankara, Turkey
    Lasers Med Sci 27:15-21. 2012
    ..Laser treatment could enhance or impair the μTBS to enamel and dentin depending on the pulse duration used and additional acid application...
  75. ncbi Does the surface treatment affect the bond strength of various fibre-post systems to resin-core materials?
    Isil Cekic-Nagas
    School of Dental Technology, Hacettepe University, Ankara, Turkiye
    J Dent 39:171-9. 2011
    ..The aim of this study was to evaluate the effects of surface treatments on bond strength of resin-core materials to three different types of fibre posts...
  76. ncbi Clinical outcome of metal-ceramic crowns fabricated with laser-sintering technology
    Milia Abou Tara
    Department of Prosthodontics, Christian Albrechts University, Kiel, Germany
    Int J Prosthodont 24:46-8. 2011
    ..The results suggest that the clinical outcome of posterior single-unit metal-ceramic crowns fabricated using laser-sintering technology is promising...
  77. ncbi Effects of cyclic loading on the bond strength of metal orthodontic brackets bonded to a porcelain surface using different conditioning protocols
    Yasser L Abdelnaby
    Department of Orthodontics, Faculty of Dentistry, Mansoura University, Egypt
    Angle Orthod 81:1064-9. 2011
    ..To evaluate cyclic and static shear bond strengths (SSBSs) of metal orthodontic brackets bonded to a porcelain surface using different conditioning protocols...
  78. ncbi Impact of smoking on human bone apposition at different dental implant surfaces: a histologic study in type IV bone
    Susana d'Avila
    Guarulhos University, Guarulhos, Sao Paulo, Brazil
    J Oral Implantol 36:85-90. 2010
    ..68% to machined and sandblasted acid-etched surfaces, respectively (P < .001). These data suggest that the sandblasted acid-etched surface presented better results than the machined surface after a short healing time in smokers...
  79. ncbi Effects of opacity and oxygen inhibition of coating resin composites on bond strength to enamel
    Atsufumi Manabe
    Department of Clinical Cariology and Endodontology, Showa University School of Dentistry, Kitasenzoku, Ohta ku, Tokyo, Japan
    Dent Mater J 28:552-7. 2009
    ..Therefore, the decrease in bond strength with increasing opacity of the coating resin shades has to be taken into account during application and light-curing...
  80. ncbi The effect of different bonding techniques on ceramic/ resin shear bond strength
    Stefan Ruttermann
    Department of Operative and Preventive Dentistry and Endodontics, Heinrich Heine University, Dusseldorf, Germany
    J Adhes Dent 10:197-203. 2008
    ..To investigate the effect of different adhesives on the shear bond strength between a feldspathic machinable ceramic and a luting resin...
  81. ncbi Effect of surface conditioning with airborne-particle abrasion on the tensile strength of polymeric CAD/CAM crowns luted with self-adhesive and conventional resin cements
    Bogna Stawarczyk
    Clinic of Fixed and Removable Prosthodontics and Dental Material Science, Center of Dental Medicine, University of Zurich, Zurich, Switzerland
    J Prosthet Dent 107:94-101. 2012
    ..Adhesively bonded, industrially polymerized resins have been suggested as definitive restorative materials. It is claimed that such resins present similar mechanical properties to glass ceramic...
  82. ncbi Ten-year survival of anterior all-ceramic resin-bonded fixed dental prostheses
    Matthias Kern
    Department of Prosthodontics, Christian Albrechts University, Kiel, Germany
    J Adhes Dent 13:407-10. 2011
    ..To evaluate the long-term outcome of all-ceramic resin-bonded fixed dental prostheses (RBFDPs) made with a two-retainer design or a cantilever single-retainer design...
  83. ncbi A retrospective analysis of sandblasted, acid-etched implants with reduced healing times with an observation period of up to 5 years
    Katja Nelson
    Department of Oral and Maxillofacial Surgery, Charite Campus Virchow Clinic, Augustenburger Platz 1, 13353 Berlin, Germany
    Int J Oral Maxillofac Implants 23:726-32. 2008
    ..The aim of this study was to evaluate the success rate of 2 different implant systems with sandblasted and acid-etched modified surfaces loaded after reduced healing periods...
  84. ncbi The early osseointegration of the laser-treated and acid-etched dental implants surface: an experimental study in rabbits
    Mingdeng Rong
    Department of Oral and Maxillofacial Surgery, Guangdong Provincial Stomatological Hospital, Southern Medical University, Guangzhou, China
    J Mater Sci Mater Med 20:1721-8. 2009
    ..05). In the present study, it was concluded that the laser-treated and acid-etched implants had good osteoconductivity and was a potential material for dental implantation...
  85. ncbi Early loading of nonsubmerged titanium implants with a chemically modified sand-blasted and acid-etched surface: 6-month results of a prospective case series study in the posterior mandible focusing on peri-implant crestal bone changes and implant stabili
    Michael M Bornstein
    Department of Oral Surgery and Stomatology, School of Dental Medicine, University of Bern, Switzerland
    Clin Implant Dent Relat Res 11:338-47. 2009
    ..The aim of this prospective case series study was to evaluate the short-term success rates of titanium screw-type implants with a chemically modified sand-blasted and acid-etched (mod SLA) surface after 3 weeks of healing...
  86. pmc The influence of four dual-cure resin cements and surface treatment selection to bond strength of fiber post
    Chang Liu
    College and Hospital of Stomatology, Jilin University, Changchun, China
    Int J Oral Sci 6:56-60. 2014
    ..0 to the fiber posts were significantly higher than the other cement groups. Sandblasting significantly increased the bond strength of DMG group to the fiber posts. ..
  87. ncbi Improving the effect of NaOCl pretreatment on bonding to caries-affected dentin using self-etch adhesives
    Gen Taniguchi
    Cariology and Operative Dentistry, Department of Restorative Science, Graduate School, Tokyo Medical and Dental University, 1 5 45 Yushima, Bunkyo ku, Tokyo 113 8549, Japan
    J Dent 37:769-75. 2009
    ..To evaluate the effect of sodium hypochlorite pretreatment on adhesion to normal and caries-affected dentin using self-etch adhesives...
  88. ncbi Early loading of sandblasted and acid-etched titanium implants in the edentulous mandible: a prospective 5-year study
    Bernd Lethaus
    Department of Cranio Maxillofacial Surgery, Maastricht University Clinics, Maastricht, The Netherlands
    Int J Oral Maxillofac Implants 26:887-92. 2011
    ..A secondary objective was to determine the peri-implant tissue response and measure alterations in peri-implant crestal bone levels...
  89. ncbi Bond strength of 4 orthodontic adhesives used with a caries-protective resin sealant
    Phillip D Lowder
    Aspen Orthodontics, PO Box 246, Rigby, ID 83442, USA
    Am J Orthod Dentofacial Orthop 134:291-5. 2008
    ....
  90. ncbi Immediate dentin sealing using an antibacterial self-etching bonding system
    Randall G Cohen
    Pract Proced Aesthet Dent 18:561-5; quiz 566. 2006
    ..This article demonstrates the clinical application of an antibacterial self-etching bonding system...
  91. ncbi Effectiveness of an Er:YAG laser in etching the enamel surface for orthodontic bracket retention
    Jung Ho Kim
    Department of Orthodontics, College of Dentistry, Kyungpook National University, Daegu, Korea
    Dent Mater J 24:596-602. 2005
    ..In conclusion, Er:YAG laser ablation achieved clinically acceptable level of tensile bond strength when used with One-Up Bond F...
  92. ncbi Characterization and surface treatment effects on topography of a glass-infiltrated alumina/zirconia-reinforced ceramic
    Alvaro Della Bona
    Dental School, The University of Passo Fundo, P O Box 611 613, Campus I, BR 285, Km171, Passo Fundo, RS 99001 970, Brazil
    Dent Mater 23:769-75. 2007
    ..Characterize the microstructure, composition and some physical properties of a glass-infiltrated alumina/zirconia-reinforced ceramic (IZ) and the effect of surface treatment on topography...
  93. ncbi Shear bond strength of precoated and uncoated brackets using a self-etching primer
    Ascension Vicente
    Docent Unit of Orthodontic Dental Clínic, University of Murcia, Hospital Morales Meseguer, 2a planta, C Marques de los Vélez s n, Murcia 30008, Spain
    Angle Orthod 77:524-7. 2007
    ..To test the hypothesis that there are no significant differences in the shear bond strength or the adhesive remaining on the tooth after debonding between precoated and uncoated brackets using a self-etching primer...
  94. ncbi A simple etching technique for improving the retention of fiber posts to resin composites
    Francesca Monticelli
    Department of Restorative Dentistry and Dental Materials, Policlinico Le Scotte, University of Siena, Viale Bracci, 53100 Siena, Italy
    J Endod 32:44-7. 2006
    ..Interfacial strengths were enhanced with the adjunctive use of H2O2 etching and silanization, and were probably dependent on the ability of the flowable composites to completely infiltrate this interdiffusion zone...
  95. ncbi Spontaneous progression of ligature induced peri-implantitis at implants with different surface roughness: an experimental study in dogs
    T Berglundh
    Department of Periodontology, Goteborg University, Goteborg, Sweden
    Clin Oral Implants Res 18:655-61. 2007
    ..The progression of peri-implantitis following varying periods of continuing plaque accumulation has been studied in animal models...
  96. ncbi Microleakage of different cementation techniques in Class V ceramic inlays
    A N Ozturk
    Department of Prosthodontics, Faculty of Dentistry, Selcuk University, Konya, Turkey
    J Oral Rehabil 31:1192-6. 2004
    ..Results showed no significant difference among three different cementation techniques (P > 0.05). Microleakage at the dentine margins was greater than that at the enamel margins (P < 0.05)...
  97. ncbi Repair of silorane composite--using the same substrate or a methacrylate-based composite?
    Annette Wiegand
    Clinic for Preventive Dentistry, Periodontology and Cariology, University of Zurich, Plattenstrasse 11, CH 8032 Zurich, Switzerland
    Dent Mater 28:e19-25. 2012
    ..The study aimed to analyze the shear bond strength of aged silorane composite repaired with the same substrate or a conventional methacrylate-based composite after different mechanical and adhesive surface treatments...
  98. ncbi Y-TZP ceramics: key concepts for clinical application
    Andrea Nobrega Cavalcanti
    Department of Restorative Dentistry, Piracicaba Dental School, UNICAMP, Piracicaba, Brazil
    Oper Dent 34:344-51. 2009
    ..However, because zirconia ceramics have only recently been developed for dental applications, there is not enough clinical evidence to support any definitive cementation protocol...
  99. ncbi Aggressiveness of self-etch adhesives on unground enamel
    Franklin R Tay
    Faculty of Dentistry, University of Hong Kong, Hong Kong SAR, China
    Oper Dent 29:309-16. 2004
    ..Differences in the thickness of enamel hybrid layers were observed and the aggressiveness of apatite dissolution in the four adhesives...
  100. ncbi Dentin bond strengths of four adhesion strategies after thermal fatigue and 6-month water storage
    Ana Sezinando
    Center for Interdisciplinary Research, Egas Moniz Institute for Health Sciences, Monte da Caparica, Portugal
    J Esthet Restor Dent 24:345-55. 2012
    ..The stability of current dental adhesives after artificial aging may depend on the adhesion strategy...
  101. ncbi Comparative study of chemical and mechanical retentive systems for bonding of indirect composite resin to commercially pure titanium
    Adriana Claudia Lapria Faria
    Department of Dental Materials and Prosthodontics, Dental School of Ribeirao Preto, University of Sao Paulo, Ribeirao Preto, SP, Brazil
    Braz Dent J 19:134-8. 2008
    ..05) than the other treatments. In conclusion, mechanical retention, either associated or not to chemical treatment, provided higher bond strength of the indirect composite resin to cpTi...

Research Grants2

  1. HYBRIDIZED DENTIN: BIOMIMETIC MODELING AND OPTIMIZATION
    Jayalakshmi Vaidyanathan; Fiscal Year: 2006
    ..Binding studies between the ligands and collagen will be conducted by:1) a novel immunochemical binding assay developed by us; and 2) isothermal titration calorimetry, and related to computed interaction energy values. ..
  2. Diabetes: Implant Integration, Success, and Benefit
    Thomas W Oates; Fiscal Year: 2010
    ..Ultimately, this information will contribute to the establishment of evidence-based guidelines for the assessment and application of dental implant therapy for patients with diabetes. ..