Summary: Composite materials composed of an ion-leachable glass embedded in a polymeric matrix. They differ from GLASS IONOMER CEMENTS in that partially silanized glass particles are used to provide a direct bond to the resin matrix and the matrix is primarily formed by a light-activated, radical polymerization reaction.
Publications210 found, 100 shown here
- Amalgam repair: evaluation of bond strength and microleakageF Ozer
Selcuk University, Faculty of Dentistry, Department of Operative Dentistry, Konya, Turkiye
Oper Dent 27:199-203. 2002..PF, MB, 3MOLC and FB performed better at the amalgam "repair" interface. The A+LB2V+A group showed no microleakage at both the occlusal and gingival test regions...
- Light-polymerized compomers: coefficient of thermal expansion and microhardnessYong Hoon Kwon
College of Dentistry, Kyungpook National University, Taegu, Korea
J Prosthet Dent 88:396-401. 2002The relationship between the filler content, coefficient of thermal expansion, and microhardness of commercial light-polymerized compomers has not been fully investigated.
- Sliding wear of 19 commercially available composites and compomersCatharina Zantner
Department of Operative Dentistry and Periodontology, University School of Dental Medicine, Freie Universitat Berlin, Berlin, Germany
Dent Mater 20:277-85. 2004....
- Cytotoxic effects of halogen- and light-emitting diode-cured compomers on human pulp fibroblastsEmine Sen Tunc
Department of Pediatric Dentistry, Faculty of Dentistry, University of Ondokuz Mayis, Samsun, Turkey
Int J Paediatr Dent 19:55-60. 2009The aim of this study was to determine the cytotoxic effects of three different compomers (Dyract AP, Compoglass, and Hytac) cured using a halogen light-curing unit (LCU) and a light-emitting diode (LED) LCU on human pulp fibroblasts.
- Changes in properties of polyacid-modified composite resins (compomers) following storage in acidic solutionsJ W Nicholson
School of Chemical and Life Sciences, University of Greenwich, Kent, UK
J Oral Rehabil 30:601-7. 2003The interaction of three polyacid-modified composite resins (compomers) with various acidic storage solutions, and also water, over periods of time up to 6 months has been studied and compared with those of a glass-ionomer and a ..
- Relative solubilities of hybrid ionomers and compomers by acid impingementM S Bapna
University of Illinois College of Dentistry, Chicago 60612 7210, USA
J Oral Rehabil 26:786-90. 1999..Results indicated that depth of erosion/solubility with hybrid glass-ionomers and compomers was not measurable by the normal procedure. Similarly, weight changes were not detectable at 0.002, 0.02 and 0...
- Band cementation materials: solubility and fluoride releaseRafael Guerra Lund
Postgraduate Program in Dentistry, Federal University of Pelotas, Pelotas, Rio Grande do Sul, Brazil
Oral Health Prev Dent 6:323-9. 2008..The aim of this study was to evaluate the solubility and the fluoride release of different materials used for orthodontic band cementation in different solutions and at different times...
- Antibacterial activity of glass-ionomer cements, compomers and resin composites: relationship between acidity and material setting phaseG Vermeersch
Department of Operative Dentistry, Dental School, Brussels, Belgium
J Oral Rehabil 32:368-74. 2005..Vitrebond GIC exhibited higher antibacterial action, probably because of a cytotoxic photo-initiator diphenyliodoniumchloride. A direct relationship between material acidity and growth inhibition of S. mutans was observed...
- Fluoride release/uptake of conventional and resin-modified glass ionomers, and compomersW Gao
Department of Prosthodontics, School of Stomatology, Beijing Medical University, China
J Dent 29:301-6. 2001..METHODS: Five specimens each of four conventional GICs, two resin-modified GICs, two compomers, and a resin composite (control) were assessed for their fluoride ion release over 6 weeks, before being exposed ..
- Sorption and solubility of resin-based restorative dental materialsManuel Toledano
Department of Dental Materials, University of Granada, Granada, Spain
J Dent 31:43-50. 2003..To measure the water sorption and solubility of different resin-based restorative dental materials...
- Effects of pH on the surface texture of glass ionomer based/containing restorative materialsM A Mohamed-Tahir
Department of Preventive Dentistry, Faculty of Dentistry, National University of Singapore, Republic of Singapore
Oper Dent 29:586-91. 2004..The surface texture of highly viscous glass ionomer cements deteriorated significantly when conditioned in solutions of low pH, which makes them more susceptible to clinical failure...
- Resin-based composites and compomers in primary molarsF Garcia-Godoy
Department of Restorative Dentistry, School of Dentistry, University of Texas Health Science Center at San Antonio, USA
Dent Clin North Am 44:541-70. 2000Resin-based composite resins and polyacid-modified resin-based composites (compomers) have become popular for the restoration of primary anterior and posterior teeth...
- Compomers in restorative therapy of children: a literature reviewNorbert Kramer
Department of Paediatric Dentistry, University Medical Centre Carl Gustav Carus, Technical University of Dresden, Dresden, Germany
Int J Paediatr Dent 17:2-9. 2007..Therefore, this paper deals with options for restoring primary teeth and the early stages of the mixed dentition using polyacid-modified composites, the so-called compomers.
- Fluoride release/uptake of polyacid-modified resin composites (compomers) in neutral and acidic buffer solutionsT Attin
University of Freiburg, Department of Operative Dentistry and Periodontology, Germany
J Oral Rehabil 26:388-93. 1999The aim of the present study was to evaluate the fluoride uptake/release of polyacid-modified resin composites (compomers) in neutral and acidic buffer solutions...
- Influence of 30% hydrogen peroxide bleaching on compomers in their surface modifications and thermal expansionChoong Bo Jung
Department of Dental Materials, College of Dentistry, Pusan National University, Pusan 602 739, Korea
Dent Mater J 21:396-403. 2002The surface modifications and the coefficient of thermal expansion of compomers after treatment with a 30% hydrogen peroxide bleaching agent were investigated...
- Reactions of connective tissue to compomers, composite and amalgam root-end filling materialsH Ozbas
Department of Endodontics, Faculty of Dentistry, Istanbul University, Istanbul, Turkey
Int Endod J 36:281-7. 2003To evaluate the subcutaneous connective tissue reaction to compomers, composite and amalgam root-end filling materials.
- Polyacid-modified composite resins ("compomers") and their use in clinical dentistryJohn W Nicholson
Department of Chemical and Pharmaceutical Sciences, University of Greenwich, Medway Campus, Chatham, Kent ME4 4TB, UK
Dent Mater 23:615-22. 2007This paper describes the chemistry and properties of polyacid-modified composite resins ("compomers") designed for use in clinical dentistry, and reviews the literature in this area.
- Long-term effects of four extraction media on the fluoride release from four polyacid-modified composite resins (compomers) and one resin-modified glass-ionomer cementB Behrend
Department of Conservative Dentistry and Periodontology, Medical University, Hannover, Germany
J Biomed Mater Res 58:631-7. 2001It was the aim of the present experiments to evaluate the fluoride leaching of four compomers and one resin-modified glass-ionomer cement (gic) into aqueous media over a 1-year period...
- Effect of storage media on the fluoride release and surface microhardness of four polyacid-modified composite resins ("compomers")W Geurtsen
Department of Conservative Dentistry and Periodontology, Medical University, Hannover, Germany
Dent Mater 15:196-201. 1999..microhardness (Vickers) as well as the release of fluoride from four polyacid-modified composite resins (PMC) ("compomers") (Compoglass F, F 2000, Dyract AP, experimental compomer) after storage in various artificial saliva (buffers) ..
- Effect of curing time and light curing systems on the surface hardness of compomersZepnep Okte
Department of Pediatric Dentistry, Faculty of Dentistry, University of Ankara, Ankara, Turkey
Oper Dent 30:540-5. 2005This study compared the Vickers hardness of the top and bottom surfaces of two compomers (Compoglass F and Dyract AP) polymerized for 20 and 40 seconds with two different light curing systems...
- One-year clinical evaluation of two polyacid-modified resin composites (compomers) in posterior permanent teethFlávio Renato de Moura
Department of Operative Dentistry, School of Dentistry, ULBRA, Cachoeira do Sul, RS, Brazil
J Adhes Dent 6:157-62. 2004..The aim of this study was to evaluate the clinical performance of two polyacid-modified resin composites (Dyract AP and F2000) in posterior teeth after 1 year of clinical service...
- Laboratory strength of glass ionomer cement, compomers, and resin compositesAndree Piwowarczyk
Department of Prosthetic Dentistry, School of Dentistry, Johann Wolfgang Goethe University, Theodor Stern Kai 7, D 60590 Frankfurt, Germany
J Prosthodont 11:86-91. 2002The study evaluates the compressive, flexural, and diametral tensile strengths of 8 core build-up materials from different material classes (highly viscous glass ionomer cement, autocured resin composite, and compomers).
- Fluoride release from glass-ionomer cements, compomers and resin compositesG Vermeersch
Department of Operative Dentistry, Dental School, Universite Catholique de Louvain, Brussels, Belgium
J Oral Rehabil 28:26-32. 2001..The glass-ionomer composition (glass particles and polyacid's type, powder/liquid ratio) should have more influence on fluoride release than material type...
- Shear bond strength of six restorative materialsM F Almuammar
King Fahad Hospital/National Guard, Riyadh, Saudi Arabia
J Clin Pediatr Dent 25:221-5. 2001..The fracture mode is not related to the shear bond strengths values...
- Two-year clinical evaluation of four polyacid-modified resin composites and a resin-modified glass-ionomer cement in Class V lesionsR Banu Ermis
Department of Restorative Dentistry and Endodontics, Suleyman Demirel University, School of Dentistry, Dishekimligi Fakultesi, Eski Sümerbank Cad, 32040 Isparta, Turkiye
Quintessence Int 33:542-8. 2002..The aim of the study was to compare the clinical performances of four polyacid-modified resin composites (F2000, Dyract AP, Compoglass F, and Elan) and one resin-modified glass-ionomer cement (Vitremer) in Class V abrasion/erosion lesions...
- Bacterial microleakage and pulp inflammation associated with various restorative materialsPeter E Murray
Department of Oral Biology, The University of Birmingham, School of Dentistry, St Chad s Queensway, UK
Dent Mater 18:470-8. 2002..The aim of this study was to evaluate and compare the pulp response of nine restorative materials when placed in non-exposed monkey cavities...
- Marginal gap formation of light-activated restorative materials: effects of immediate setting shrinkage and bond strengthM Irie
Department of Biomaterials, Okayama University Graduate School of Medicine and Dentistry, 2 5 1 Shikata cho, Okayama 700 8525, Japan
Dent Mater 18:203-10. 2002....
- Microleakage of a packable composite associated with different materialsAlessandro Dourado Loguercio
Department of Dental Materials, Dental School, University of Sao Paulo, Sao Paulo, Brazil
J Clin Dent 13:111-5. 2002..05). It was concluded that the use of Fuji II LC as a base material led to the best sealing of the gingival margins based upon the lowest degree of microleakage observed...
- Determination of mode of fracture of adhesive restorative materials. An invitro studyUllal Anand Nayak
Department of Pedodeontics and Preventive Dentistry, College of Dental Surgery Institution of Dental Science, Mangalore, India
Indian J Dent Res 13:112-4. 2002..The mode of fracture was determined at a magnification of 10X. The TPH composite resin and Dyract showed adhesive fracture whereas the glass ionomer group showed cohesive fracture...
- SEM study of a self-etching primer adhesive system used for dentin bonding in primary and permanent teethP D da Silva Telles
Department of Pediatric Dentistry, School of Dentistry of Bauru, , Brazil
Pediatr Dent 23:315-20. 2001..CONCLUSION: The self-etching primer adhesive system Prompt-L-Pop failed to generate sealed interfaces consistently between the dentin of primary and permanent teeth and the composite resin or the compomer evaluated in this study...
- Microleakage of Class II composite restorationsG Wibowo
University of Manitoba, Winnipeg, Canada
Am J Dent 14:177-85. 2001..CLINICAL SIGNIFICANCE: This study demonstrated the difficulty in sealing a proximal dentin margin. However, the glass-ionomer/hybrid restorative techniques is the most likely to give successful clinical results...
- Microleakage of adhesive restorative materialsS Gladys
BIOMAT-Department of Operative Dentistry and Dental Materials, School of Dentistry, Oral Pathology and Maxillo-Facial Surgery, Catholic University of Leuven, Belgium
Am J Dent 14:170-6. 2001..CLINICAL SIGNIFICANCE: Distinct leakage patterns were recorded among all materials investigated. Complete marginal sealing could still not be reached with the new adhesive restorative materials...
- Linear regression modeling to compare fluoride release profiles of various restorative materialsDeniz C Can-Karabulut
Department of Restorative Dentistry, Faculty of Dentistry, University of Ankara, Ankara 06500, Turkey
Dent Mater 23:1057-65. 2007..The aim of this study was to compare the released fluoride profiles of various restorative materials by using linear regression analysis...
- Minimally invasive dentistry: bond strength of different sealant and filling materials to enamelRoberta C B Alonso
FOP UNICAMP, Department of Pediatric Dentistry, Avenida Limeira 901 Areião 13414 018 Piracicaba, SP, Brazil
Oral Health Prev Dent 3:87-95. 2005..The purpose of this study was to evaluate the shear bond strength of different sealant and filling materials, used in minimally invasive dentistry, to human enamel...
- Correlation between the amount of linear polymerization shrinkage and cuspal deflectionSoon Young Lee
Department of Conservative Dentistry, Yonsei University, Seoul, Korea
Oper Dent 31:364-70. 2006..deflection and linear polymerization shrinkage in resin composites and polyacid modified resin composites (compomers)...
- Surface finish of a new hybrid aesthetic restorative materialA U J Yap
Department of Restorative Dentistry, Faculty of Dentistry, National University of Singapore, Republic of Singapore
Oper Dent 27:161-6. 2002..The quality of surface finish for all materials was not significantly affected by long-term storage in water...
- Effects of in-office tooth whiteners on hardness of tooth-colored restorativesA U J Yap
Department of Restorative Dentistry, Faculty of Dentistry, National University of Singapore, Republic of Singapore
Oper Dent 27:137-41. 2002..The hardness of resin-modified glass-ionomer cements, hybrid, polyacid-modified and PRG composites is therefore not significantly affected by the use of 35% carbamide peroxide and 35% hydrogen peroxide in-office tooth whiteners...
- Artificial formed caries-like lesions around esthetic restorative materialsNuray Attar
Faculty of Dentistry, University of Hacettepe, Department of Conservative Dentistry, Ankara, Turkey
J Clin Pediatr Dent 26:289-96. 2002..The conventional glass ionomer cement (Ceramfil beta) provided the highest protection against caries attack and the non-fluoride releasing composite resin (Valux Plus) restoration provided the least (p<0.05)...
- Effect of four intermediate layer treatments on microleakage of Class II composite restorationsM S Hagge
University of the Pacific School of Dentistry, USA
Gen Dent 49:489-95; quiz 496-7. 2001..05, Dunn's test). This study supports the use of the glass ionomer open sandwich technique in deep Class II direct composite restorations...
- A comparison of microtensile bond strengths of several dentin bonding systems to primary and permanent dentinM F Burrow
School of Dental Science, The University of Melbourne, 711 Elizabeth Street, Melbourne, Victoria 3000, Australia
Dent Mater 18:239-45. 2002..The bonded interfaces were also observed using field emission electron microscopy(FE-SEM)...
- The two-year clinical performance of esthetic restorative materials in noncarious cervical lesionsBanu Onal
Ege University, School of Dentistry, Department of Restorative Dentistry and Endodontics, Bornova Izmir, Turkey
J Am Dent Assoc 136:1547-55. 2005..In this study, the authors evaluated the clinical performance of these materials over a two-year period...
- Influence of adhesive application duration on dentin bond strength of single-application bonding systemsMasashi Miyazaki
Nihon University School of Dentistry, Department of Operative Dentistry, Tokyo, Japan
Oper Dent 27:278-83. 2002..The data suggest that the duration of single-application bonding systems was not a crucial factor for determining dentin bond strength, even though morphological changes were observed on the dentin surface...
- Microleakage in class II composite resin restorations: total bonding and open sandwich techniqueAlessandro Dourado Loguercio
Department of Dental Materials, School of Dentistry, University of Sao Paulo, SP, Brazil
J Adhes Dent 4:137-44. 2002..The objective of this in vitro study was to evaluate gingival microleakage in Class II total bond resin restorations in comparison to open sandwich technique restorations using different materials...
- Orthodontic-restorative treatment of chipped or worn incisorsC Goracci
School of Oral Hygiene, University of Siena, Italy
Am J Dent 14:50-5. 2001..The Adhesive/Primer of F2000 was unable to produce an equally retentive morphology...
- Colour stability of tooth-coloured restorative materialsMarianna Gaintantzopoulou
Eur J Prosthodont Restor Dent 13:51-6. 2005..Compomer was the least color stable of the materials tested. Additional polymerization significantly decreased the colour change of both composite resins...
- A comparative evaluation of four adhesive tooth coloured restorative materials. An invitro studyU A Nayak
Departments of Pedodontics and Preventive Dentistry, College of Dental Surgery, Mangalore, India
Indian J Dent Res 13:49-53. 2002..The TPH composite resin showed maximum microleakage, significantly higher than Fuji II, which showed least microleakage. All the four materials showed more micro leakage in cementum when compared to enamel...
- A comparison of impact strength of fragment-bonded anterior teeth using three different restorative materials: an in vitro studyA R Prabhakar
Department of Pedodontics and Preventive Dentistry, Bapuji, Dental College and Hospital, Davangere 577 004, Karnataka, India
J Indian Soc Pedod Prev Dent 25:88-92. 2007..The purpose of this investigation was to estimate the impact strength of fractured anterior teeth reattached using three different restorative materials and compare their impact strengths to those of control...
- Clinical evaluation of four Class 5 restorative materials: 3-year recallJohn O Burgess
Department of Operative Dentistry and Biomaterials, School of Dentistry, Louisiana State University Health Sciences Center, 1100 Florida Ave, Box 137, New Orleans, LA 70119, USA
Am J Dent 17:147-50. 2004....
- Long-term dentin retention of etch-and-rinse and self-etch adhesives and a resin-modified glass ionomer cement in non-carious cervical lesionsJan W V van Dijken
Department of Odontology, Umea University, Umea, Sweden
Dent Mater 24:915-22. 2008..The aim of this study was to evaluate the clinical long-term retention to dentin of seven adhesive systems...
- Microleakage and polymerization shrinkage of various polymer restorative materialsDavid Alain Gerdolle
Swiss Dental Clinics, Vevey, Switzerland
J Dent Child (Chic) 75:125-33. 2008..The aim of this in vitro study was to evaluate the polymerization shrinkage and the microleakage of direct resin-based restorative materials commonly used in pediatric dentistry...
- Effects of in-office bleaching products on surface finish of tooth-colored restorationsPranee Wattanapayungkul
Department of Restorative, Faculty of Dentistry, National University of Singapore, Republic of Singapore
Oper Dent 28:15-9. 2003..In-office bleaching products are not detrimental to the surface finish of composites, compomers, giomers and resin-modified glass ionomer cements.
- The effect of different drying methods for single step adhesive systems on microleakage of tooth colored restorationsBarry M Owens
Department of Restorative Dentistry, University of Tennessee, College of Dentistry, 875 Union Avenue, Memphis, TN 38163, USA
J Contemp Dent Pract 4:1-9. 2003..Significantly greater leakage was also recorded with OptiBond Solo Plus and Prime & Bond 2.1 sponge applicator drying as compared to the same materials, syringe air drying...
- Clinical performance of posterior compomer restorations over 4 yearsNorbert Kramer
Department of Operative Dentistry and Periodontology, University of Erlangen Nuremberg, Germany
Am J Dent 19:61-6. 2006..To clinically evaluate two polyacid-modified resin composites (Hytac and Dyract AP) for the restoration of posterior teeth over a 4-year period and to investigate accessible margins by light microscopy...
- The effect of rebonding on microleakage of class V aesthetic restorationsMaria Carolina Guilherme Erhardt
Department of Restorative Dentistry, Piracicaba School of Dentistry, Sao Paulo, Brazil
Oper Dent 27:396-402. 2002..ZS) with rebonding showed the lowest microleakage that was not statistically different from (ZS) without rebonding and (FSB) with rebonding...
- Five-year double-blind randomized clinical evaluation of a resin-modified glass ionomer and a polyacid-modified resin in noncarious cervical lesionsAlessandro D Loguercio
School of Dentistry, Department of Dental Materials and Operative Dentistry University of Oeste de Santa Catarina, Campus Joaçaba, SC, Brazil
J Adhes Dent 5:323-32. 2003..The aim of this double-blind randomized study was to compare the clinical performance of a resin-modified glass ionomer (Vitremer, 3M) and a polyacid-modified resin (Dyract, Dentsply DeTrey) in noncarious Class V restorations after 5 years...
- Comparison of surface finish of new aesthetic restorative materialsAdrian U J Yap
Department of Restorative Dentistry, Faculty of Dentistry, National University of Singapore, Republic of Singapore
Oper Dent 29:100-4. 2004..The surface finish of glass ionomers and compomer was significantly poorer than composites. Composite materials based on ormocer and nanomer technology were significantly smoother than those based on microfillers and nanoclusters...
- Restoration-enamel interface with argon laser and visible light polymerization of compomer and composite resin restorations: a polarized light and scanning electron microscopic in vitro studyJ Hicks
Department of Pathology, Texas Children s Hospital, Baylor College of Medicine, Houston, TX, USA
J Clin Pediatr Dent 27:353-8. 2003..No differences were found between AL and VL polymerization. With the restoration-enamel interface by SEM, compomers and composite resins were adapted closely to the cavosurface enamel and tags of restorative material protruded ..
- The marginal seal of a flowable composite, an injectable resin modified glass ionomer and a compomer in primary molars--an in vitro studyA R Prabhakar
Department of Pedodontics and Preventive Dentistry, Bapuji Dental College and Hospital, Davangere, Karnataka
J Indian Soc Pedod Prev Dent 21:45-8. 2003..This concludes that flowable composite materials adhere better to the primary teeth than resin modified glass ionomer and compomer...
- Effect of the cavity configuration factor on the marginal microleakage of esthetic restorative materialsEduardo Batista Franco
Department of Operative Dentistry, Bauru Dental School, University of Sao Paulo, Brazil
Am J Dent 16:211-4. 2003..To evaluate the effect of the cavity configuration factor (CF) on the marginal microleakage of cervical restorations with four aesthetic restorative materials...
- Bond strengths of polyacid-modified resin composites and a resin-modified glass-ionomer cement to primary dentinZafer C Cehreli
Department of Pediatric Dentistry, Hacettepe University, Ankara, Turkey
Am J Dent 16:47A-50A. 2003..To evaluate the bond strengths of three polyacid-modified resin composites and one resin-modified glass-ionomer cement to caries-simulated primary dentin after 18-months' water immersion...
- Influence of different repair procedures on bond strength of adhesive filling materials to etched enamel in vitroChristian Hannig
Department of Operative Dentistry, Preventive Dentistry and Periodontology, University of Gottingen, Gottingen, Germany
Oper Dent 28:800-7. 2003....
- The effect of airborne-particle abrasion on the shear bond strength of four restorative materials to enamel and dentinArzu Mujdeci
Faculty of Dentistry, University of Ankara, Turkey
J Prosthet Dent 92:245-9. 2004..The role of airborne-particle abrasion on the bond strength of restorative materials to enamel and dentin is controversial...
- Reliability of different techniques to assess marginal defects of Class II restorations in retrieved primary molars: a visual-tactile, SEM, dye penetration and polarized light microscopy studyA B Fuks
Dept of Pediatric Dentistry, Hebrew University Hadassah School of Dental Medicine, Jerusalem, Israel
Refuat Hapeh Vehashinayim 19:6-16, 67. 2002..A good degree of agreement was observed between the three evaluation techniques...
- "No-bottle" vs "multi-bottle" dentin adhesives--a microtensile bond strength and morphological studyR Frankenberger
Policlinic for Operative Dentistry and Periodontology, University of Erlangen-Nuremberg, Glueckstrasse 11, D-91054 Erlangen, Germany
Dent Mater 17:373-80. 2001..When applied in multiple coats, Prompt L-Pop results in bond strengths that are not statistically different from those of Prime&Bond NT, a total-etch adhesive...
- Effect of curing with a plasma light on the properties of polymerizable dental restorative materialsB J Millar
Dental Biomaterials Department, GKT Dental Institute, London, UK
J Oral Rehabil 28:549-52. 2001..These findings suggest that long-term durability of materials may be compromised by employing plasma light cure rather than a conventional cure system and further studies of this point are recommended...
- Fluoride release of polyacid-modified composite resins with and without bonding agentsC W Vercruysse
Department of Dental Materials Science, Institute for Biomedical Technologies (IBITECH, Ghent University, De Pintelaan 185 (P8, 9000 Ghent, Belgium
Dent Mater 17:354-8. 2001..The decrease in fluoride release might reduce the material's potential to prevent recurrent caries...
- Resistance of core materials against torsional forces on differently conditioned titanium postsIsmail Akişli
University of Hamburg, Dental School, Hamburg, Germany
J Prosthet Dent 88:367-74. 2002..The separation of core materials from titanium posts, which have a low modulus of elasticity, has been identified as a problem in restorative dentistry...
- Fluoride, hydrogen ion and HEMA release from light-cured GIC restorativesKeiji Kawai
Department of Conservative Dentistry, Osaka University Faculty of Dentistry, Osaka, Japan
Am J Dent 15:149-52. 2002..To quantitatively measure the amount of fluoride, hydroxy ion and hydroxyethyl methacrylate (HEMA) released from various light-cured restorative materials...
- A predictive formula of the contraction stress in restorative and luting materials attending to free and adhered surfaces, volume and deformationA Miguel
Conservative Dentistry Department, Faculty of Odontology, Complutense University, Madrid, Spain
Dent Mater 17:241-6. 2001..SIGNIFICANCE: Predictive parameters have influence in a different way to what is actually considered, if the system is allowed to have deformation, as occurs naturally and volume and material's characteristics are considered...
- Bacterial penetration of restored cavitiesS Zivkovic
Clinic for Conservative Dentistry and Endodontics, Faculty of Stomatology, University of Belgrade, Yugoslavia
Oral Surg Oral Med Oral Pathol Oral Radiol Endod 91:353-8. 2001..The bacterial penetration test showed that the use of restorative material does not entirely eliminate microleakage...
- Importance of water sorption and solubility studies for couple bonding agent--resin-based filling materialEric Mortier
Oper Dent 29:669-76. 2004..4 and 355.4 microg/mm(-3) and between 75.9 and 144.9 microg/mm(-3), respectively) compared to the restorative materials. Gluma One Bond and Admira Bond showed lower sorption and solubility than Excite and Scotchbond 1...
- Inhibition of artificial secondary caries in root by fluoride-releasing restorative materialsY Torii
Department of Operative Dentistry, Okayama University Dental School, 2-5-1 Shikata-cho, Okayama 700-8525, Japan
Oper Dent 26:36-43. 2001..including resin-modified glass-ionomer cements (Fuji ionomer TypeII LC, Photac-Fil Aplicap, Vitremer), compomers (Ionosit FIL, Compoglass, Dyract) and fluoride-releasing resin composites (Heliomolar radiopaque, Degufill ..
- Comparative in vivo and in vitro investigation of interfacial bond variabilityM Hannig
Department of Operative Dentistry and Periodontology, University of Freiburg, Hugstetter Strasse 55, D-79106 Freiburg, Germany
Oper Dent 26:3-11. 2001..It was concluded that achievement of a completely gap-free internal adaptation between restorative material and dentin in totally bonded composite resin restorations is difficult to predict under in vivo as well as in vitro conditions...
- Influence of chemo-mechanical caries removal on the surface topography of dental composite resin and glass-ionomer materials: an in vitro studyAnna Arvidsson
Department of Biomaterials, Göiteborg Universiy, SE 405 30 Goteborg, Sweden
Acta Odontol Scand 62:137-42. 2004..If dental filling materials of composite resin or glass-ionomer materials are exposed to Carisolv gel, no or only minor surface topographical changes can be expected. n..
- Effect of alcoholic and low-pH soft drinks on fluoride release from compomerN H Abu-Bakr
Department of Operative Dentistry and Endodontics, Niigata University School of Dentistry, Niigata, Japan
J Esthet Dent 12:97-104. 2000..The purpose of this study was to evaluate the amount of fluoride released from compomer restorative materials after immersion in various media...
- In vitro investigation of aluminum and fluoride release from compomers, conventional and resin-modified glass-ionomer cements: a standardized approachL Savarino
Istituti Ortopedici Rizzoli, Bologna, Italy
J Biomater Sci Polym Ed 11:289-300. 2000..e. biocompatibility testing. Two polyacid-modified resin composites of recent application, commonly called compomers (Dyract and Dyract Cem), were compared with two conventional acid-based (Fuji I, Ketac-Cem) and two resin-..
- New trends in dentin/enamel adhesionJ Perdigao
Division of Operative Dentistry, University of Minnesota, Minneapolis 55455, USA
Am J Dent 13:25D-30D. 2000..manufacturers of these simplified one-bottle materials recommend their use to bond polyacid-modified composites (compomers) without a separate etching step...
- Development of gingivitis around aged restorations of resin-modified glass ionomer cement, polyacid-modified resin composite (compomer) and resin compositeJ W van Dijken
Institution of Oral Biology, Dental Hygienist Education, Dental School, Umea University, Sweden
Clin Oral Investig 2:180-3. 1998Resin-modified glass ionomer cements (RMGIC) and polyacid-modified resin composites (PMC, compomers) are two recently introduced material groups supposed to replace traditional cements in operative dentistry...
- A new screening test for toxicity testing of dental materialsM Pelka
Policlinic for Operative Dentistry and Periodontology, University of Erlangen Nuremberg, Glueckstr 11, D 91054, Erlangen, Germany
J Dent 28:341-5. 2000..The development of a micro plate assay for cytotoxicity testing of dental materials based on a bioassay using brine shrimp larvae (artemia salina) as sensitive organisms...
- Effect of hydrostatic pressure on regional bond strengths of compomers to dentineL Zheng
Department of Operative Dentistry, Faculty of Dentistry, Tokyo Medical and Dental University, 1 5 45 Yushima, Bunkyo ku, 113 8549, Tokyo, Japan
J Dent 28:501-8. 2000The aim of this study was to evaluate the effect of hydrostatic pressure on the regional bond strengths of compomers to dentine.
- Storage of polyacid-modified resin composites ("compomers") in lactic acid solutionJ W Nicholson
Dental Biomaterials Department, Guy s King s St Thomas Dental Institute, King s College London, UK
Dent Mater 15:413-6. 1999..The aim of this study was to determine the interaction of four polyacid-modified resin composites with aqueous lactic acid solutions, and to compare changes with those for a glass-ionomer cement and a conventional resin composite...
- Esthetic compomer restorations in posterior teeth using a new all-in-one adhesive: case presentationJ Manhart
Department of Restorative Dentistry, Dental School, LMU University, Munich, Germany
J Esthet Dent 11:250-8. 1999b>Compomers have continually gained in importance since their introduction in 1993, especially because of their ease of handling. The main indications are cervical lesions, Class III restorations, and restorations in the primary dentition...
- The application of silicon and silicates in dentistry: a reviewA K Lührs
Department of Conservative Dentistry, Periodontology and Preventive Dentistry, Medical University Hannover, Hannover, Germany
Prog Mol Subcell Biol 47:359-80. 2009..major applications is their use as fillers in different dental filling materials such as glass-ionomer cements, compomers, composites, and adhesive systems...
- Effect of surface conditioning on the shear bond strength of compomers to human primary and permanent enamelZ C Cehreli
Department of Pedodontics, Hacettepe University, Faculty of Dentistry, Ankara, Turkey
Am J Dent 12:26-30. 1999....
- Review on fluoride-releasing restorative materials--fluoride release and uptake characteristics, antibacterial activity and influence on caries formationAnnette Wiegand
Department of Operative Dentistry, Preventive Dentistry and Periodontology, University of Gottingen, Robert Koch Str 40, 37075 Gottingen, Germany
Dent Mater 23:343-62. 2007....
- Accessing and restoring root caries: a case reportE W Turner
Expanded Function Program at the University of Tennessee, College of Dentistry, USA
J Tenn Dent Assoc 87:20-2; quiz 23-4. 2007..These properties are not present in amalgam, composites, or compomers. Additionally, the material itself is relatively easy to use and provides an effective zone of caries inhibition ..
- The effect of debonding and/or bleaching on enamel color - an in-vitro studySusanne Wriedt
Department of Orthodontics, Johannes Gutenberg University, Mainz, Germany
J Orofac Orthop 69:169-76. 2008..in the literature on bonding brackets to bleached teeth and on the effect of bleaching material on the color of compomers. The purpose of this study was to investigate changes in tooth color depending on the process of bonding - ..
- Resin-modified glass ionomer cements (RM GICs) implications for use in pediatric dentistryJ Vaikuntam
Department of Preventive Sciences, University of Minnesota School of Dentistry, Minneapolis 55455, USA
ASDC J Dent Child 64:131-4. 1997..The introduction of "compomers" provides an exciting alternative to amalgam...
- Setting reaction of polyacid modified composite resins or compomersJ L R Arrondo
Unidad de Biofísica Centro Mixto CSIC UPV EHU and Departamento de Bioquímica y Biología Molecular, Universidad del Pais Vasco, Spain
Open Dent J 3:197-201. 2009The hardening of modified polyacid composite resins (compomers) and glass-ionomers have been studied using infrared spectroscopy...
- Marginal adaptation of direct composite and sandwich restorations in Class II cavities with cervical margins in dentineT Dietrich
Department of Periodontology and Synoptic Dentistry, Humboldt University, Berlin, Germany
J Dent 27:119-28. 1999..the marginal adaptation of direct Class II sandwich restorations with resin-modified glass-ionomer cements and compomers in comparison to base and total bond restorations...
- Effect of different topical fluoride applications on the surface roughness of a colored compomerAysun Avsar
Department of Pediatric Dentistry, Faculty of Dentistry, Ondokuz Mayis University, Samsun, Turkey
J Appl Oral Sci 18:171-7. 2010....
- In vitro caries inhibition by polyacid-modified composite resins ('compomers')B J Millar
Department of Conservative Dentistry, King s Dental Institute, London, UK
J Dent 26:133-6. 1998..The aim of this study was to compare the in-vitro caries inhibition of two polyacid-modified composite resins (PMCRs)...
- Analysis of sealing vs tensile bond strength of eight adhesive restorative material systemsM O Del-Nero
Restorative Dentistry Department, Faculty of Odontology, Complutense University, Madrid, Spain
J Adhes Dent 2:117-27. 2000..intent was to determine: 1) the sealing ability of eight restorative materials (five composite resins and three compomers) used together with their corresponding dentin bonding systems, 2) their tensile bond strength, and 3) the ..
- Effect of conditioner and restorative resin on enamel bond strengthsJ Perdigao
Department of Restorative Dentistry, School of Dentistry, University of Minnesota, Minneapolis 55455, USA
Am J Dent 13:88-92. 2000..To evaluate the effect of three enamel conditioners and four restorative materials on enamel shear bond strengths...
- Inhibition of bacterial and glucan adherence to various light-cured fluoride-releasing restorative materialsK Kawai
Department of Conservative Dentistry, Osaka University Faculty of Dentistry, 1 8 Yamadaoka, Suita, 565 0871, Osaka, Japan
J Dent 29:119-22. 2001..This study investigated the potential plaque adhesion properties of various light-cured fluoride-releasing restorative materials by measuring the amount of adhering radiolabeled bacteria and glucan...
- The teaching of Class I and II restorations in primary molars: a survey of North American dental schoolsM Guelmann
Department of Pediatric Dentistry, University of Florida, Gainesville, Florida, USA
Pediatr Dent 23:410-4. 2001..The purpose of this study was to obtain an overview of materials and restoratives techniques taught for Class I and Class II restorations in primary molars in different pediatric dentistry departments in North America...
- Ability of restorative and fluoride releasing materials to prevent marginal dentine demineralizationL Savarino
Laboratory for Pathophysiology of Orthopaedic Implants, Rizzoli Orthopaedic Institute and Department of Anatomical Sciences and Skeletal Muscle Pathophysiology, University of Bologna, Via Di Barbiano 1 10, 40136 Bologna, Italy
Biomaterials 25:1011-7. 2004..b>Compomers (Groups B and D) showed a thinner demineralization of the outer lesions, a less demineralization along the ..
- Marginal adaptation of compomers in Class I and V cavities in primary molarsI H el-Kalla
Department of Pediatric Dentistry, Faculty of Dentistry, Mansoura University, Egypt
Am J Dent 12:37-43. 1999To evaluate in primary molars (1) the adaptation of three compomers in Class I and V cavities at the cavosurface margins and inside the cavity, and (2) the effect of cavity etching on such adaptation.
- Shear peel bond strength of compomers veneered to amalgamY H Al-Jazairy
College of Dentistry, King Saud University, Riyadh, Saudi Arabia
J Prosthet Dent 85:396-400. 2001The practice of veneering compomers to amalgam restorations has not been studied.
- Compomers adaptation to Class I and V cavities in permanent teethI H el Kalla
Department of Pediatric Dentistry, Faculty of Dentistry, Mansoura University, Egypt
ASDC J Dent Child 67:29-36, 8. 2000..Sixty molars were used, divided for the three compomers used, which were subdivided for Class I and V and redivided into etched and nonetched cavities (5 each)...
- Alternatives to silver amalgam and resin composite in pediatric dentistryT P Croll
Department of Pediatric Dentistry, University of Pennsylvania, School of Dental Medicine, USA
Quintessence Int 29:697-703. 1998..This article reviews the development and use of glass-ionomer silver-cermet cements, resin-modified glass-ionomer cements, and polyacid-modified resin composites (compomers) for restoration of primary teeth.
- Novel Antibacterial Fluoride-releasing Dental MaterialsXiaoming Xu; Fiscal Year: 2012..Furthermore, all dental composites and compomers require bonding agents in order to reduce marginal leakage and limit secondary caries...
- Novel Amino Acid-Based Glass-Ionomer BiomaterialsDong Xie; Fiscal Year: 2005..abstract_text> ..
- HYBRIDIZED DENTIN: BIOMIMETIC MODELING AND OPTIMIZATIONJayalakshmi Vaidyanathan; Fiscal Year: 2006..Binding studies between the ligands and collagen will be conducted by:1) a novel immunochemical binding assay developed by us; and 2) isothermal titration calorimetry, and related to computed interaction energy values. ..
- Novel Nanostructured Dental Glass-Ionomers for Advanced Dental RestorativesDong Xie; Fiscal Year: 2008..unreadable] [unreadable] [unreadable]..