Shiro Suzuki

Summary

Affiliation: University of Alabama at Birmingham
Country: USA

Publications

  1. ncbi request reprint Does the wear resistance of packable composite equal that of dental amalgam?
    Shiro Suzuki
    Department of Prosthodontics and Biomaterials, University of Alabama at Birmingham School of Dentistry, Birmingham, AL 35294 0007, USA
    J Esthet Restor Dent 16:355-65; discussion 365-7. 2004
  2. ncbi request reprint Evaluation of a new fiber-reinforced resin composite
    S Suzuki
    Department of Prosthodontics and Biomaterials, School of Dentistry, University of Alabama at Birmingham, Alabama, USA
    J Biomed Mater Res B Appl Biomater 76:184-9. 2006
  3. ncbi request reprint In vitro wear of nano-composite denture teeth
    Shiro Suzuki
    Department of Prosthodontics and Biomaterials, University of Alabama at Birmingham School of Dentistry, AL 35294 0007, USA
    J Prosthodont 13:238-43. 2004
  4. ncbi request reprint Simulated enamel wear during occlusal contact
    Shiro Suzuki
    UAB School of Dentistry, Department of Prosthodontics and Biomaterials, SDB 604, 1919 7th Avenue, South, Birmingham, AL 35294 0007, USA
    Am J Dent 17:373-7. 2004
  5. ncbi request reprint Evaluation of toothbrush and generalized wear of luting materials
    Shiro Suzuki
    UAB School of Dentistry, Department of Prosthodontics and Biomaterials, SDB 604, 1919 7th Ave South, Birmingham, AL 35294 0007, USA
    Am J Dent 18:311-7. 2005
  6. ncbi request reprint Mutual wear evaluation of resin composites when opposing enamel and dentin
    Shiro Suzuki
    Department of Prosthodontics and Biomaterials, University of Alabama at Birmingham, 1919 7th Avenue South, Birmingham, Alabama, USA
    J Biomed Mater Res B Appl Biomater 81:76-81. 2007
  7. ncbi request reprint Clinical evaluation of a new resin composite crown system to eliminate postoperative sensitivity
    S Suzuki
    Department of Prosthodontics and Biomaterials, University of Alabama at Birmingham School of Dentistry, 1919 Seventh Avenue South, Birmingham, Alabama 35294 0007, USA
    Int J Periodontics Restorative Dent 20:498-509. 2000
  8. ncbi request reprint In vitro wear of indirect composite restoratives
    Shiro Suzuki
    School of Dentistry, University of Alabama at Birmingham, Birmingham, Ala 35294 0007, USA
    J Prosthet Dent 88:431-6. 2002
  9. ncbi request reprint Wear resistance of resin cements
    S Suzuki
    Department of Biomaterials, University of Alabama at Birmingham, School of Dentistry 35294 0007, USA
    Am J Dent 8:83-7. 1995
  10. ncbi request reprint Effects of filler composition on flexibility of microfilled resin composite
    S Suzuki
    Department of Prosthodontics and Biomaterials, School of Dentistry, University of Alabama at Birmingham
    J Biomed Mater Res B Appl Biomater 74:547-52. 2005

Detail Information

Publications32

  1. ncbi request reprint Does the wear resistance of packable composite equal that of dental amalgam?
    Shiro Suzuki
    Department of Prosthodontics and Biomaterials, University of Alabama at Birmingham School of Dentistry, Birmingham, AL 35294 0007, USA
    J Esthet Restor Dent 16:355-65; discussion 365-7. 2004
    ..There is little evidence that packable composites are sufficiently wear resistant to be used as an alternative to amalgam...
  2. ncbi request reprint Evaluation of a new fiber-reinforced resin composite
    S Suzuki
    Department of Prosthodontics and Biomaterials, School of Dentistry, University of Alabama at Birmingham, Alabama, USA
    J Biomed Mater Res B Appl Biomater 76:184-9. 2006
    ..The interfacial bonding between the FRC and the indirect composite was strong enough to prevent delamination...
  3. ncbi request reprint In vitro wear of nano-composite denture teeth
    Shiro Suzuki
    Department of Prosthodontics and Biomaterials, University of Alabama at Birmingham School of Dentistry, AL 35294 0007, USA
    J Prosthodont 13:238-43. 2004
    ..Few laboratory tests have been able to substantiate and quantify the wear resistances of polymeric denture teeth. This study evaluated the relative wear resistance of several types of denture teeth using an in vitro wear testing device...
  4. ncbi request reprint Simulated enamel wear during occlusal contact
    Shiro Suzuki
    UAB School of Dentistry, Department of Prosthodontics and Biomaterials, SDB 604, 1919 7th Avenue, South, Birmingham, AL 35294 0007, USA
    Am J Dent 17:373-7. 2004
    ..To investigate in vitro rates of wear for human enamel that opposes human enamel by means of two-body and three-body wear tests...
  5. ncbi request reprint Evaluation of toothbrush and generalized wear of luting materials
    Shiro Suzuki
    UAB School of Dentistry, Department of Prosthodontics and Biomaterials, SDB 604, 1919 7th Ave South, Birmingham, AL 35294 0007, USA
    Am J Dent 18:311-7. 2005
    ..To evaluate (1) the wear rates of various types of luting materials by means of toothbrush and generalized wear tests, and (2) the relationship between interfacial gap and luting material wear...
  6. ncbi request reprint Mutual wear evaluation of resin composites when opposing enamel and dentin
    Shiro Suzuki
    Department of Prosthodontics and Biomaterials, University of Alabama at Birmingham, 1919 7th Avenue South, Birmingham, Alabama, USA
    J Biomed Mater Res B Appl Biomater 81:76-81. 2007
    ..5-6.1 microm), and those of Epic-TMPT against enamel (7.2-7.9 microm). It was concluded that the wear rates of dentin varied with the type of composite used while those of enamel showed the consistency...
  7. ncbi request reprint Clinical evaluation of a new resin composite crown system to eliminate postoperative sensitivity
    S Suzuki
    Department of Prosthodontics and Biomaterials, University of Alabama at Birmingham School of Dentistry, 1919 Seventh Avenue South, Birmingham, Alabama 35294 0007, USA
    Int J Periodontics Restorative Dent 20:498-509. 2000
    ....
  8. ncbi request reprint In vitro wear of indirect composite restoratives
    Shiro Suzuki
    School of Dentistry, University of Alabama at Birmingham, Birmingham, Ala 35294 0007, USA
    J Prosthet Dent 88:431-6. 2002
    ..Several new indirect composites claim to be successfully used for full coverage crowns, but there is limited information for wear values of these new indirect composites...
  9. ncbi request reprint Wear resistance of resin cements
    S Suzuki
    Department of Biomaterials, University of Alabama at Birmingham, School of Dentistry 35294 0007, USA
    Am J Dent 8:83-7. 1995
    ..This in vitro wear testing system can be used as a screening test for the cement materials before a clinical study...
  10. ncbi request reprint Effects of filler composition on flexibility of microfilled resin composite
    S Suzuki
    Department of Prosthodontics and Biomaterials, School of Dentistry, University of Alabama at Birmingham
    J Biomed Mater Res B Appl Biomater 74:547-52. 2005
    ..0 +/- 1.8 kJ/m(2)) or 64:36 (7.1 +/- 2.4 kJ/m(2)). Based upon the results, it was concluded that the mechanical properties of microfilled composites were improved by the modification of prepolymerized filler composition...
  11. ncbi request reprint Vertical height loss: an investigation of four restorative materials opposing enamel
    M H Ramp
    University of Alabama at Birmingham School of Dentistry 35294 0007, USA
    J Prosthodont 8:252-7. 1999
    ..Vertical wear was measured as enamel height loss, material stylus height loss, and total vertical height loss (the sum of the enamel height loss and the restorative material height loss)...
  12. ncbi request reprint Wear of luting materials with titanium retainer
    Y Taira
    UAB School of Dentistry, Department of Prosthodontics and Biomaterials, SDB 604, 1530 3rd Avenue, South Birmingham, AL 35294-0007, USA
    Am J Dent 14:81-4. 2001
    ..No significant differences were detected among Super-Bond Opaque adhesive, Super-Bond adhesive, and All-Bond adhesive. Visually, continuity with the titanium framework was observed when the titanium disks were luted with resin systems...
  13. ncbi request reprint Effect of filler loading on resin cement bonding to silanized buildup composites
    Hirotada Kajihara
    Department of Fixed Prosthodontics, Kagoshima University Dental School, 8 35 1 Sakuragaoka, Kagoshima shi, Kagoshima 890 8544, Japan
    Am J Dent 18:109-12. 2005
    ..To determine the effects of silanation for core buildup composites on bond strength of resin cement...
  14. ncbi request reprint Influence of mechanical properties of two resin cements on durability of bond strength to dentin after cyclic loading
    Kohyoh Soeno
    Nagasaki University, Graduate School of Biomedical Sciences, Department of Developmental and Reconstructive Medicine, Division of Fixed Prosthodontics and Oral Rehabilitation, 1 7 1, Sakamoto, Nagasaki 852 8588, Japan
    Dent Mater J 24:351-5. 2005
    ..After 100,000 cycles, the bond strength of resin composite cement was significantly decreased while acrylic resin cement showed no decrease in bond strength...
  15. ncbi request reprint Evaluation of wear and subsequent dye penetration of endodontic temporary restorative materials
    Masataka Suehara
    Department of Endodontics, Tokyo Dental College, 1 2 2, Masago, Mihama ku, Chiba shi 261 8502, Japan
    Dent Mater J 25:199-204. 2006
    ..40 +/- 0.32 mm. On the other hand, there were no significant differences between TERM (1.30 +/- 0.57 mm) and Temporary Pack (2.10 +/- 0.12 mm), and between Caviton (2.60 +/- 0.41 mm) and Temporary Pack...
  16. ncbi request reprint Improvement of bonding to bleached bovine tooth surfaces by ascorbic acid treatment
    Koichi Muraguchi
    Department of Fixed Prosthetic Dentistry, Advanced Therapeutic Course, Kagoshima University Graduate School of Medical and Dental Sciences, 8 35 1 Sakuragaoka, Kagoshima, 890 8544, Japan
    Dent Mater J 26:875-81. 2007
    ..Results of this study suggested that ascorbic acid application was effective in preventing the reduction of bonding ability to bleached teeth...
  17. ncbi request reprint Wear evaluation of porcelain opposing gold, composite resin, and enamel
    Akihiko Kadokawa
    Fixed Prosthetic Dentistry, Kagoshima University Graduate School of Medical and Dental Sciences, Japan
    J Prosthet Dent 96:258-65. 2006
    ..However, there is limited information on comparison of mutual wear rates when these materials oppose in 2-body and 3-body conditions...
  18. ncbi request reprint Effect of air-blowing variables on bond strength of all-in-one adhesives to bovine dentin
    Koichi Shinkai
    Department of Operative Dentistry, School of Life Dentistry at Niigata, The Nippon Dental University, 1 8 Hamaura cho, Niigata, 951 8580, Japan
    Dent Mater J 25:664-8. 2006
    ..01). On the other hand, with Fluoro Bond Shake One, the microTBS value of specimens applied with intensive air-blowing was significantly lower than that applied with gentle air-blowing (p<0.01)...
  19. ncbi request reprint The effect of tooth bleaching on the bond strength of an experimental primer to enamel
    Koichi Shinkai
    Department of Operative Dentistry, The Nippon Dental University School of Life Dentistry at Niigata, Niigata, Japan
    Odontology 95:38-43. 2007
    ..05). In contrast, the microTBS value of group C without bleaching was significantly higher than that of all other experimental groups (P < 0.01)...
  20. ncbi request reprint A novel primer on dentin bonding of 4-META/MMA-TBB to collagen-depleted dentin
    Kohyoh Soeno
    Division of Fixed Prosthodontics and Oral Rehabilitation, Department of Developmental and Reconstructive Medicine, Graduate School of Biomedical Sciences, Nagasaki University, Japan
    Dent Mater J 24:19-23. 2005
    ..075Fe and Super-Bond C&B system. The experimental primer consisting of 10 wt% ascorbic acid and 0.075 wt% ferric chloride improved the bonding between Super-Bond C&B and dentin conditioned with phosphoric acid and NaClO...
  21. ncbi request reprint Flexural strengths of denture base resin repaired with autopolymerizing resin and reinforcements after thermocycle stressing
    Hiroyuki Minami
    Department of Prosthodontics, Kagoshima University, Kagoshima, Japan
    J Prosthodont 14:12-8. 2005
    ..The purpose of this study was to evaluate the maximum flexural load of denture base resin repaired with autopolymerizing resin and several reinforcement systems after thermocycle stressing...
  22. ncbi request reprint An evaluation of the viscoelastic characteristics of soft denture liners
    Fumiyo Tamura
    Department of Hygiene and Oral Health, Showa University School of Dentistry, Tokyo, Japan
    J Prosthodont 11:270-7. 2002
    ..The purpose of this study was to evaluate the viscoelastic characteristics of a group of soft denture liners by means of a creep test...
  23. ncbi request reprint Effect of reinforcement methods on the retention of resin-bonded fixed partial dentures using a composite denture tooth as a pontic: in vitro evaluation
    Yoshito Minesaki
    Department of Fixed Prosthodontics, Kagoshima University Dental School, Japan
    J Adhes Dent 5:225-34. 2003
    ..The incorporation of composite denture teeth as pontics in resin-bonded fixed partial dentures has been deemed to be short-lived. This study investigated whether pre- or posttreatments could improve the bonding of denture tooth pontics...
  24. ncbi request reprint In vitro evaluation of the influence of repairing condition of denture base resin on the bonding of autopolymerizing resins
    Hiroyuki Minami
    Department of Fixed Prosthodontics, Kagoshima University, Kagoshima, Japan
    J Prosthet Dent 91:164-70. 2004
    ..Bonding failures of repair resin to denture base resin occurs when denture base resin is wet, however, little is known of how water relates to failures...
  25. ncbi request reprint Evaluation of a novel dentin bonding system compared to commercial bonding system
    Kohyoh Soeno
    Division of Fixed Prosthodontics and Oral Rehabilitation, Department of Developmental and Reconstructive Medicine, Graduate School of Biomedical Sciences, Nagasaki University, Sakamoto, Nagasaki, Japan
    J Dent 32:315-20. 2004
    ..The aim of the current study was to compare the bond strength of an experimental bonding system with commercial bonding systems...
  26. ncbi request reprint Effect of surface treatment on the bonding of an autopolymerizing soft denture liner to a denture base resin
    Hiroyuki Minami
    Department of Fixed Prosthodontics, Kagoshima University, Japan
    Int J Prosthodont 17:297-301. 2004
    ..This in vitro study evaluated the effects of surface treatments and thermocycling on the bonding of autopolymerizing silicone soft denture liner (Sofreliner) to denture base resin...
  27. ncbi request reprint Adhesion of 4-META/MMA-TBB resin to collagen-depleted dentin--effect of conditioner with ascorbic acid/ferric chloride
    Kohyoh Soeno
    Nagasaki University, Graduate School of Biomedical Sciences, Department of Developmental and Reconstructive Medicine, Division of Fixed Prosthodontics and Oral Rehabilitation, Sakamoto, Nagasaki, Japan
    Dent Mater J 23:100-5. 2004
    ..Although the use of phosphoric acid and NaClO resulted in decreased bond strength between 4-META/MMA-TBB resin and dentin, additional conditioning with ascorbic acid and ferric chloride improved the bond strength...
  28. ncbi request reprint The effects of air-abrasion on dentin, enamel, and metal bonding
    Hirotada Kajihara
    Department of Fixed Prosthodontics, Kagoshima University Dental School, 8 35 1 Sakuragaoka, Kagoshima shi, Kagoshima 890 8544, Japan
    Am J Dent 17:161-4. 2004
    ..To determine the most effective emission pressure for producing effective bond strengths of an adhesive resin to enamel, dentin and metal...
  29. ncbi request reprint In vitro evaluation of bond strength and surface roughness of a resin-paint material
    Koichi Muraguchi
    Department of Fixed Prosthetic Dentistry, Kagoshima University Graduate School of Medical and Dental Sciences, Japan
    Dent Mater J 23:406-11. 2004
    ..2 MPa, p<0.0054) after thermo-cycling. As for surface roughness, its results after thermo-cycling (2.7+/-0.2 microm, p<0.001) demonstrated that the resin-paint needed further improvements to maintain the original surface texture...
  30. ncbi request reprint Improvement of the bond strength of 4-META/MMA-TBB resin to collagen-depleted dentin
    Kohyoh Soeno
    Department of Developmental and Reconstructive Medicine, Division of Fixed Prosthodontics and Oral Rehabilitation, Graduate School of Biomedical Sciences, Nagasaki University, Nagasaki, Japan
    J Biomed Mater Res B Appl Biomater 73:104-8. 2005
    ..The experimental dentin pretreatment improved the bond strength of a 4-META/MMA-TBB resin to human dentin compared to 10-3 treatment after thermocycling...
  31. doi request reprint In vitro evaluation of the effect of thermal and mechanical fatigues on the bonding of an autopolymerizing soft denture liner to denture base materials using different primers
    Hiroyuki Minami
    Department of Fixed Prosthodontics, Kagoshima University Graduate School of Medical and Dental Sciences, Kagoshima, Japan
    J Prosthodont 17:392-400. 2008
    ....
  32. ncbi request reprint Effect of high light intensity on cavity wall adaptation of a resin composite with a self-etching primer system
    Koichi Shinkai
    Department of Operative Dentistry, School of Dentistry at Niigata, The Nippon Dental University, 1 8 Hamaura cho, Niigata 951 8580, Japan
    J Biomed Mater Res B Appl Biomater 79:420-4. 2006
    ..There were no significant differences (p > 0.05) in the degree of cavity adaptation among the specimens polymerized with light intensities higher than 1100 mW/cm(2)...