Jenni M Buckley

Summary

Affiliation: University of California
Country: USA

Publications

  1. ncbi request reprint Sensitivity of vertebral compressive strength to endplate loading distribution
    Jenni M Buckley
    Orthopaedic Biomechanics Laboratory, Department of Mechanical Engineering, University of California, Berkeley, CA 94720, USA
    J Biomech Eng 128:641-6. 2006
  2. ncbi request reprint Quantitative computed tomography-based predictions of vertebral strength in anterior bending
    Jenni M Buckley
    Department of Mechanical Engineering, University of California Berkeley, Berkeley, CA, USA
    Spine (Phila Pa 1976) 32:1019-27. 2007
  3. doi request reprint Relative strength of thoracic vertebrae in axial compression versus flexion
    Jenni M Buckley
    Biomechanical Testing Facility, UCSF SFGH Orthopaedic Trauma Institute, University of California, San Francisco, CA 94110, USA
    Spine J 9:478-85. 2009
  4. doi request reprint Biomechanical analysis of osteotomy type and rod diameter for treatment of cervicothoracic kyphosis
    Justin K Scheer
    Biomechanical Testing Facility, Orthopaedic Trauma Institute, San Francisco General Hospital, San Francisco, CA, USA
    Spine (Phila Pa 1976) 36:E519-23. 2011
  5. doi request reprint Propensity for hip dislocation in gait loading versus sit-to-stand maneuvers: implications for redefining the dome of the acetabulum needed for stability of the hip during activities of daily living
    Amir Matityahu
    University of California, San Francisco, San Francisco General Hospital, Orthopaedic Trauma Institute, San Francisco, CA, USA
    J Orthop Trauma 26:e97-e101. 2012
  6. doi request reprint Comparison of a new multifilament stainless steel suture with frequently used sutures for flexor tendon repair
    Erik McDonald
    UCSF SFGH Orthopaedic Trauma Institute, and the Department of Anatomy and Orthopaedic Surgery, University of California, San Francisco, CA, USA
    J Hand Surg Am 36:1028-34. 2011
  7. ncbi request reprint Comparison of Expandable and Fixed Interbody Cages in a Human Cadaver Corpectomy Model: Fatigue Characteristics
    Murat Pekmezci
    Biomechanical Testing Facility, San Francisco General Hospital Department of Orthopaedic Surgery, University of California The Taylor Collaboration, St Mary s Medical Center Department of Neurological Surgery, University of California, San Francisco, CA
    Clin Spine Surg 29:387-393. 2016
  8. doi request reprint Biomechanical comparison of three fixation techniques for unstable thoracolumbar burst fractures. Laboratory investigation
    Frank L Acosta
    Department of Neurological Surgery, University of California, San Francisco, California 94143, USA
    J Neurosurg Spine 8:341-6. 2008
  9. doi request reprint Effects of mixing techniques on vancomycin-impregnated polymethylmethacrylate
    Jennifer C Laine
    Department of Orthopaedic Surgery, University of California, San Francisco, California 94143, USA
    J Arthroplasty 26:1562-6. 2011
  10. doi request reprint On the stiffness matrix of the intervertebral joint: application to total disk replacement
    Oliver M O'Reilly
    Department of Mechanical Engineering, University of California at Berkeley, Berkeley, CA 94706 1740, USA
    J Biomech Eng 131:081007. 2009

Collaborators

Detail Information

Publications15

  1. ncbi request reprint Sensitivity of vertebral compressive strength to endplate loading distribution
    Jenni M Buckley
    Orthopaedic Biomechanics Laboratory, Department of Mechanical Engineering, University of California, Berkeley, CA 94720, USA
    J Biomech Eng 128:641-6. 2006
    ..e., uniform displacement or force, was strongly correlated with the relative magnitude of the strength bounds. Thus, explicit disc modeling may not be necessary...
  2. ncbi request reprint Quantitative computed tomography-based predictions of vertebral strength in anterior bending
    Jenni M Buckley
    Department of Mechanical Engineering, University of California Berkeley, Berkeley, CA, USA
    Spine (Phila Pa 1976) 32:1019-27. 2007
    ..This study examined the ability of QCT-based structural assessment techniques to predict vertebral strength in anterior bending...
  3. doi request reprint Relative strength of thoracic vertebrae in axial compression versus flexion
    Jenni M Buckley
    Biomechanical Testing Facility, UCSF SFGH Orthopaedic Trauma Institute, University of California, San Francisco, CA 94110, USA
    Spine J 9:478-85. 2009
    ....
  4. doi request reprint Biomechanical analysis of osteotomy type and rod diameter for treatment of cervicothoracic kyphosis
    Justin K Scheer
    Biomechanical Testing Facility, Orthopaedic Trauma Institute, San Francisco General Hospital, San Francisco, CA, USA
    Spine (Phila Pa 1976) 36:E519-23. 2011
    ..Biomechanical laboratory research...
  5. doi request reprint Propensity for hip dislocation in gait loading versus sit-to-stand maneuvers: implications for redefining the dome of the acetabulum needed for stability of the hip during activities of daily living
    Amir Matityahu
    University of California, San Francisco, San Francisco General Hospital, Orthopaedic Trauma Institute, San Francisco, CA, USA
    J Orthop Trauma 26:e97-e101. 2012
    ....
  6. doi request reprint Comparison of a new multifilament stainless steel suture with frequently used sutures for flexor tendon repair
    Erik McDonald
    UCSF SFGH Orthopaedic Trauma Institute, and the Department of Anatomy and Orthopaedic Surgery, University of California, San Francisco, CA, USA
    J Hand Surg Am 36:1028-34. 2011
    ..To investigate the mechanical properties of some common suture materials currently in use and compare them with a new multifilament stainless steel suture...
  7. ncbi request reprint Comparison of Expandable and Fixed Interbody Cages in a Human Cadaver Corpectomy Model: Fatigue Characteristics
    Murat Pekmezci
    Biomechanical Testing Facility, San Francisco General Hospital Department of Orthopaedic Surgery, University of California The Taylor Collaboration, St Mary s Medical Center Department of Neurological Surgery, University of California, San Francisco, CA
    Clin Spine Surg 29:387-393. 2016
    ..In vitro cadaver biomechanics study...
  8. doi request reprint Biomechanical comparison of three fixation techniques for unstable thoracolumbar burst fractures. Laboratory investigation
    Frank L Acosta
    Department of Neurological Surgery, University of California, San Francisco, California 94143, USA
    J Neurosurg Spine 8:341-6. 2008
    ....
  9. doi request reprint Effects of mixing techniques on vancomycin-impregnated polymethylmethacrylate
    Jennifer C Laine
    Department of Orthopaedic Surgery, University of California, San Francisco, California 94143, USA
    J Arthroplasty 26:1562-6. 2011
    ..We conclude that the addition of vancomycin to polymethylmethacrylate at commonly accepted concentrations does substantially decrease cement strength and that more complex mixing techniques do not improve cement strength significantly...
  10. doi request reprint On the stiffness matrix of the intervertebral joint: application to total disk replacement
    Oliver M O'Reilly
    Department of Mechanical Engineering, University of California at Berkeley, Berkeley, CA 94706 1740, USA
    J Biomech Eng 131:081007. 2009
    ..As a result, this paper presents the first such characterization of the kinetics of a total disk replacement...
  11. doi request reprint Pure moment testing for spinal biomechanics applications: Fixed versus sliding ring cable-driven test designs
    Johnny Eguizabal
    Department of Orthopaedic Surgery, University of California, San Francisco, CA 94143, USA
    J Biomech 43:1422-5. 2010
    ..This suggests that the proposed sliding ring design should be used for future in vitro spine biomechanics studies involving a cable-driven pure moment apparatus...
  12. doi request reprint Tibial plateau fracture repairs augmented with calcium phosphate cement have higher in situ fatigue strength than those with autograft
    Erik McDonald
    Biomechanical Testing Facility, San Francisco General Hospital, SFGH UCSF Orthopaedic Trauma Institute, University of California at San Francisco, San Francisco, CA, USA
    J Orthop Trauma 25:90-5. 2011
    ..This study compared the biomechanical fatigue strength of calcium phosphate augmented repairs versus autogenous bone graft (ABG) repairs in lateral tibia plateau fractures...
  13. doi request reprint Optimal screw placement for base plate fixation in reverse total shoulder arthroplasty
    James Guido Distefano
    Department of Orthopaedic Surgery, St Mary s Medical Center, San Francisco, CA, USA
    J Shoulder Elbow Surg 20:467-76. 2011
    ..Scapular cortical thickness has not been fully characterized from the perspective of determining optimal screw placement for securing the glenoid base plate in reverse shoulder arthroplasty...
  14. doi request reprint Biomechanical comparison of transosseous versus suture anchor repair of the subscapularis tendon
    Daniel J Wheeler
    Department of Orthopaedic Surgery, University of California, San Francisco, CA 94143 0728, USA
    Arthroscopy 26:444-50. 2010
    ..We also performed real-time measurement of contact area and pressure of the repair site under rotational loads...
  15. pmc Comparison of quantitative computed tomography-based measures in predicting vertebral compressive strength
    Jenni M Buckley
    Department of Orthopaedic Surgery, University of California at San Francisco, San Francisco, CA 94143, USA
    Bone 40:767-74. 2007
    ..g., anterior bending or in situ loading with intervertebral discs intact...