J Ferracane

Summary

Affiliation: Oregon Health and Science University
Country: USA

Publications

  1. ncbi request reprint Measuring the residual stress in dental composites using a ring slitting method
    Jeong Won Park
    Department of Conservative Dentistry, School of Dentistry, Kyungpook National University, 101, Dongin dong 2 ga, Joong Gu, 700 422 Daegu, South Korea
    Dent Mater 21:882-9. 2005
  2. ncbi request reprint Effect of light activation method on flexural properties of dental composites
    Jack L Ferracane
    Department of Biomaterials and Biomechanics, Oregon Health and Science University, 611 S W Campus Drive, Portland, Oregon 97239, USA
    Am J Dent 16:318-22. 2003
  3. doi request reprint Polymerization stress - Is it clinically meaningful?
    Jack L Ferracane
    Department of Restorative Dentistry, Oregon Health and Science University, Portland, OR 97201, USA Electronic address
    Dent Mater 32:1-10. 2016
  4. pmc Resin-based composite performance: are there some things we can't predict?
    Jack L Ferracane
    Division of Biomaterials and Biomechanics, Department of Restorative Dentistry, Oregon Health and Science University, Portland, OR 97239, USA
    Dent Mater 29:51-8. 2013
  5. ncbi request reprint Fluoride penetration into the hybrid layer from a dentin adhesive
    J L Ferracane
    Oregon Health Sciences University, Portland 97201, USA
    Am J Dent 11:23-8. 1998
  6. ncbi request reprint Developing a more complete understanding of stresses produced in dental composites during polymerization
    Jack L Ferracane
    Division of Biomaterials and Biomechanics, Department of Restorative Dentistry, Oregon Health and Science University, 611 S W Campus Drive, Portland, OR 97239, USA
    Dent Mater 21:36-42. 2005
  7. ncbi request reprint Is the wear of dental composites still a clinical concern? Is there still a need for in vitro wear simulating devices?
    Jack L Ferracane
    Division of Biomaterials and Biomechanics, Department of Restorative Dentistry, Oregon Health and Science University, 611 S W Campus Drive, Portland, OR 97239, USA
    Dent Mater 22:689-92. 2006
  8. doi request reprint Buonocore Lecture. Placing dental composites--a stressful experience
    Jack L Ferracane
    Department of Restorative Dentistry, Oregon Health and Science University, Portland, OR, USA
    Oper Dent 33:247-57. 2008
  9. ncbi request reprint Relationship between composite contraction stress and leakage in Class V cavities
    Jack L Ferracane
    Department of Biomaterials and Biomechanics, Oregon Health and Science University, 611 S W Campus Drive, Portland, Oregon 97239, USA
    Am J Dent 16:239-43. 2003
  10. ncbi request reprint Effect of admixed high-density polyethylene (HDPE) spheres on contraction stress and properties of experimental composites
    J L Ferracane
    Department of Biomaterials and Biomechanics, Oregon Health and Science University, School of Dentistry, 611 SW Campus Drive, Portland, Oregon 97239, USA
    J Biomed Mater Res B Appl Biomater 66:318-23. 2003

Collaborators

Detail Information

Publications44

  1. ncbi request reprint Measuring the residual stress in dental composites using a ring slitting method
    Jeong Won Park
    Department of Conservative Dentistry, School of Dentistry, Kyungpook National University, 101, Dongin dong 2 ga, Joong Gu, 700 422 Daegu, South Korea
    Dent Mater 21:882-9. 2005
    ..This study was designed to determine the effect of slitting and measuring time on the residual stress...
  2. ncbi request reprint Effect of light activation method on flexural properties of dental composites
    Jack L Ferracane
    Department of Biomaterials and Biomechanics, Oregon Health and Science University, 611 S W Campus Drive, Portland, Oregon 97239, USA
    Am J Dent 16:318-22. 2003
    ..To determine if irradiating composites in a laboratory tungsten-halogen light-curing unit produced equal flexural properties to stepwise hand-curing with a tungsten-halogen lamp...
  3. doi request reprint Polymerization stress - Is it clinically meaningful?
    Jack L Ferracane
    Department of Restorative Dentistry, Oregon Health and Science University, Portland, OR 97201, USA Electronic address
    Dent Mater 32:1-10. 2016
    ..The objective of this article is to discuss the evidence for polymerization shrinkage and shrinkage stress of dental composite restoratives in terms of its potential relevance to the clinical situation..
  4. pmc Resin-based composite performance: are there some things we can't predict?
    Jack L Ferracane
    Division of Biomaterials and Biomechanics, Department of Restorative Dentistry, Oregon Health and Science University, Portland, OR 97239, USA
    Dent Mater 29:51-8. 2013
    ..is to address the following questions: Why do direct dental composite restorative materials fail clinically? What tests may be appropriate for predicting clinical performance? Does in vitro testing correlate with clinical performance?..
  5. ncbi request reprint Fluoride penetration into the hybrid layer from a dentin adhesive
    J L Ferracane
    Oregon Health Sciences University, Portland 97201, USA
    Am J Dent 11:23-8. 1998
    ..To evaluate the in vitro microleakage of a new fluoride-containing dentin adhesive and to provide evidence for fluoride release from the adhesive and penetration into the dentin...
  6. ncbi request reprint Developing a more complete understanding of stresses produced in dental composites during polymerization
    Jack L Ferracane
    Division of Biomaterials and Biomechanics, Department of Restorative Dentistry, Oregon Health and Science University, 611 S W Campus Drive, Portland, OR 97239, USA
    Dent Mater 21:36-42. 2005
    ..The phenomenon of contraction stress development in dental composite restoratives is highly complex, and despite many investigations, remains as a significant clinical concern...
  7. ncbi request reprint Is the wear of dental composites still a clinical concern? Is there still a need for in vitro wear simulating devices?
    Jack L Ferracane
    Division of Biomaterials and Biomechanics, Department of Restorative Dentistry, Oregon Health and Science University, 611 S W Campus Drive, Portland, OR 97239, USA
    Dent Mater 22:689-92. 2006
    ..In this light, the wear of composites continues to be studied by many researchers, and it is justifiable to seek well-defined and reproducible in vitro methods for predicting this multifactorial phenomenon...
  8. doi request reprint Buonocore Lecture. Placing dental composites--a stressful experience
    Jack L Ferracane
    Department of Restorative Dentistry, Oregon Health and Science University, Portland, OR, USA
    Oper Dent 33:247-57. 2008
    ..This manuscript will review many of the important scientific and clinical issues relating to the generation and quantitation of the stresses produced in dental composites during curing...
  9. ncbi request reprint Relationship between composite contraction stress and leakage in Class V cavities
    Jack L Ferracane
    Department of Biomaterials and Biomechanics, Oregon Health and Science University, 611 S W Campus Drive, Portland, Oregon 97239, USA
    Am J Dent 16:239-43. 2003
    ..The purpose of this study was to determine the relationship between polymerization contraction stress and leakage in Class V composites...
  10. ncbi request reprint Effect of admixed high-density polyethylene (HDPE) spheres on contraction stress and properties of experimental composites
    J L Ferracane
    Department of Biomaterials and Biomechanics, Oregon Health and Science University, School of Dentistry, 611 SW Campus Drive, Portland, Oregon 97239, USA
    J Biomed Mater Res B Appl Biomater 66:318-23. 2003
    ..In conclusion, the addition of HDPE spheres reduces contraction stress in composites, either through stress relief or a reduction in elastic modulus...
  11. ncbi request reprint Hygroscopic and hydrolytic effects in dental polymer networks
    Jack L Ferracane
    Division of Biomaterials and Biomechanics, Department of Restorative Dentistry, Oregon Health and Science University, 611 S W Campus Drive, Portland, OR, USA
    Dent Mater 22:211-22. 2006
    ..The objective of this manuscript is to outline the factors associated with hygroscopic and hydrolytic effects in dental polymer networks, and to review the literature generated over the past thirty years or more in this area...
  12. ncbi request reprint Vaporization of Hg from Hg-in amalgams during setting and after abrasion
    J Ferracane
    Department of Biomaterials and Biomechanics, Oregon Health Sciences University, Portland 97201, USA
    Dent Mater 15:191-5. 1999
    ..The aim of this study was to determine if Hg vaporization during setting and after abrasion of amalgams could be reduced by adding indium to Hg prior to trituration...
  13. pmc Use of caries prevention services in the Northwest PRECEDENT dental network
    J Ferracane
    Department of Restorative Dentistry, Oregon Health and Science University School of Dentistry, Portland, OR 97239, USA
    Community Dent Oral Epidemiol 39:69-78. 2011
    ....
  14. ncbi request reprint In vitro evaluation of the marginal degradation of dental composites under simulated occlusal loading
    J L Ferracane
    Department of Biomaterials and Biomechanics, Oregon Health Sciences University, Portland 97201, USA
    Dent Mater 15:262-7. 1999
    ..Our objective was to use an in vitro oral wear simulator to compare the susceptibility to marginal breakdown of different classes of dental composites...
  15. doi request reprint Self-adhesive resin cements - chemistry, properties and clinical considerations
    J L Ferracane
    Department of Restorative Dentistry, Division of Biomaterials and Biomechanics, Oregon Health and Science University, Portland, OR, USA
    J Oral Rehabil 38:295-314. 2011
    ..The result of this review of self-adhesive resin cements would suggest that these materials may be expected to show similar clinical performance as other resin-based and non-resin based dental cements...
  16. doi request reprint Resin composite--state of the art
    Jack L Ferracane
    Department of Restorative Dentistry, Oregon Health and Science University, Portland, OR 97239, USA
    Dent Mater 27:29-38. 2011
    ..The objective is to review the current state of the art of dental composite materials...
  17. doi request reprint Porcelain surface alterations and refinishing after use of two orthodontic bonding methods
    Drew T Herion
    Oregon Health and Science University, Portland, OR 97239, USA
    Angle Orthod 80:167-74. 2010
    ..To compare porcelain surfaces at debonding after use of two surface preparation methods and to evaluate a method for restoring the surface...
  18. ncbi request reprint A pilot study of a simple photon migration model for predicting depth of cure in dental composite
    Yin Chu Chen
    Department of Biomedical Engineering, OHSU, 9205 SW Barnes Rd, Portland, OR 97225, USA
    Dent Mater 21:1075-86. 2005
    ..The purpose of this study was to build a photo migration model to calculate the radiant exposure (irradiancextime) in dental composite and to relate the radiant exposure with extent of cure using polymer kinetics models...
  19. ncbi request reprint Abrasive wear of resin composites as related to finishing and polishing procedures
    Cecilia P Turssi
    Division of Biomaterials and Biomechanics, School of Dentistry, Oregon Health and Sciences University, 611 SW Campus Drive, Portland, OR 97239, USA
    Dent Mater 21:641-8. 2005
    ....
  20. doi request reprint The effect of various dentifrices on surface roughness and gloss of resin composites
    Juliana Da Costa
    Department of Restorative Dentistry, Division of Operative Dentistry, Oregon Health and Science University School of Dentistry, Portland, OR 97239, USA
    J Dent 38:e123-8. 2010
    ..The purpose of this study was to evaluate the effect of different levels of abrasiveness (RDA) of dentifrices on the gloss and surface roughness of resin composites after toothbrushing...
  21. doi request reprint Evaluation of different methods of optical impression making on the marginal gap of onlays created with CEREC 3D
    Juliana B da Costa
    Oregon Health and Science University, Portland, OR, USA
    Oper Dent 35:324-9. 2010
    ..This study evaluated the marginal gaps on several surfaces of onlays created with the Cerec 3D system using one intraoral and two extraoral optical impression methods...
  22. ncbi request reprint Wear and fatigue behavior of nano-structured dental resin composites
    Cecilia P Turssi
    Division of Biomaterials and Biomechanics, School of Dentistry, Oregon Health and Science University, Portland, Oregon, USA
    J Biomed Mater Res B Appl Biomater 78:196-203. 2006
    ..In terms of wear and fatigue resistance, nano-structured composites may perform either similarly or comparatively worse than a microfilled composite...
  23. doi request reprint Comparison of at-home and in-office tooth whitening using a novel shade guide
    Juliana B da Costa
    Oregon Health and Science University, Restorative Dentistry, Portland, OR, USA
    Oper Dent 35:381-8. 2010
    ..This study evaluated the time necessary for at-home whitening (HW) to match the results of an in-office (OW) treatment, side effects and patients' preferences/perceptions...
  24. ncbi request reprint Reduced polymerization stress through non-bonded nanofiller particles
    John R Condon
    Department of Biomaterials and Biomechanics, School of Dentistry, Oregon Health and Science University, Portland, USA
    Biomaterials 23:3807-15. 2002
    ..05). Significant reductions in polymerization stress can be achieved through minor alterations in composite chemistry...
  25. ncbi request reprint Dynamic mechanical analysis of storage modulus development in light-activated polymer matrix composites
    Ronald L Sakaguchi
    Department of Biomaterials and Biomechanics, Oregon Health and Science University, 611 SW Campus Dr, SD 503, Portland, OR 97201, USA
    Dent Mater 18:197-202. 2002
    ..The goal of this study was to evaluate the potential for using dynamic mechanical analysis of tubular geometry in a three-point flexure fixture for monitoring the storage modulus development of a light-activated polymer matrix composite...
  26. ncbi request reprint A clinical comparison of two cements for levels of post-operative sensitivity in a practice-based setting
    Thomas Hilton
    Department of Restorative Dentistry, OHSU School of Dentistry, Portland, OR, USA
    Oper Dent 29:241-8. 2004
    ..This study compared the post-operative results of cementing full crowns (all metal or PFM) with either a conventional (Fuji I, GC; n=102) or a resin modified GI luting cement (Rely X, 3M/ESPE; n=107)...
  27. ncbi request reprint In vitro wear simulation measurements of composite versus resin-modified glass ionomer luting cements for all-ceramic restorations
    Roberto R Braga
    Department of Dental Materials, University of Sao Paulo, School of Dentistry, Sao Paulo, Brazil
    J Esthet Restor Dent 14:368-76. 2002
    ....
  28. ncbi request reprint Effects of resin formulation and nanofiller surface treatment on the properties of experimental hybrid resin composite
    Lawrence Musanje
    Department of Biomaterials and Biomechanics, Oregon Health and Science University, 611 SW Campus Dr, Portland, OR 97239, USA
    Biomaterials 25:4065-71. 2004
    ..Adding non-bonded nanofiller to hybrid composites had no systematic effect on DC. Non-bonded nanofillers had no significant effect on the long-term properties of hybrid composites...
  29. doi request reprint Biomimetic dentin desensitizer based on nano-structured bioactive glass
    John C Mitchell
    Department of Restorative Dentistry, Division of Biomaterials and Biomechanics, Oregon Health and Science University, 611 SW Campus Drive, Portland, OR 97239, United States
    Dent Mater 27:386-93. 2011
    ..This study evaluated the ability of a novel sol-gel bioactive glass, in conjunction with appropriate carrier vehicles, to reduce dentinal fluid flow, with an eye toward reducing dentinal hypersensitivity...
  30. doi request reprint Can interaction of materials with the dentin-pulp complex contribute to dentin regeneration?
    Jack L Ferracane
    Division of Biomaterials and Biomechanics, Department of Restorative Dentistry, Oregon Health and Science University, Portland, OR, USA
    Odontology 98:2-14. 2010
    ..This review summarizes current knowledge about the potential beneficial effects derived from the interaction of dental materials with the dentin-pulp complex, as well as potential future developments in this exciting field...
  31. ncbi request reprint Evaluation of the amalgamation reaction of experimental Ag-Sn-Cu alloys containing Pd using a mercury plating technique
    Marie Koike
    Nagasaki University Graduate School of Biomedical Sciences, Department of Developmental and Reconstructive Medicine, Division of Removable Prosthodontics, 1 7 1 Sakamoto, Nagasaki, 852 8588 Japan
    Dent Mater J 22:280-91. 2003
    ..8. Specimens with moderately plated Hg showed gamma1 (Ag2Hg3) polyhedra and eta' Cu6Sn5, but not gamma2. This method effectively identifies alloys prone to forming gamma2...
  32. ncbi request reprint Flexural fatigue strength of CAD/CAM composite material and dual-cured resin luting cements
    Keiichi Yoshida
    Department of Fixed Prosthodontics, Nagasaki University School of Dentistry, 1 7 1, Sakamoto, Nagasaki 852 8588, Japan
    Am J Dent 16:177-80. 2003
    ..To evaluate the flexural strength and flexural fatigue strength of a CAD/CAM composite and three resin luting cements...
  33. ncbi request reprint Contraction stress of flowable composite materials and their efficacy as stress-relieving layers
    Roberto R Braga
    Depto de Materiais Dentarios da FOUSP, Sao Paulo, SP, Brazil
    J Am Dent Assoc 134:721-8. 2003
    ..They also measured the stress reduction produced by placing a precured layer of flowable composite under a nonflowable composite...
  34. ncbi request reprint Effects of cavity configuration on composite restoration
    Kyoung Kyu Choi
    Department of Conservative Dentistry, School of Dentistry, Kyunghee University, Seoul, Korea
    Oper Dent 29:462-9. 2004
    ..Mean microtensile bond strength to dentin was also decreased with increasing C-factor for both types of composites. Microleakage scores for the hybrid composite restorations were generally higher than the microhybrid composite...
  35. ncbi request reprint Polymerization contraction stress in dual-cure cements and its effect on interfacial integrity of bonded inlays
    Roberto R Braga
    Department of Dental Materials, School of Dentistry, University of Sao Paulo, Av Prof Lineu Prestes, 2227, Sao Paulo, SP 00508 900, Brazil
    J Dent 30:333-40. 2002
    ..To compare the polymerization contraction stress of resin cements in dual-cure and self-cure modes, and verify its effect on microleakage and gap formation in class I cavities restored with porcelain inlays...
  36. ncbi request reprint Factors involved in the development of polymerization shrinkage stress in resin-composites: a systematic review
    Roberto R Braga
    Department of Dental Materials, School of Dentistry, University of Sao Paulo, Av Prof Lineu Prestes, 2227, Sao Paulo, SP 05508 900, Brazil
    Dent Mater 21:962-70. 2005
    ..The purpose of this systematic review is to discuss the primary factors involved with polymerization shrinkage stress development...
  37. ncbi request reprint Effect of energy density on properties and marginal integrity of posterior resin composite restorations
    Kraig S Vandewalle
    USAF Dental Investigation Service, 310C B St, Great Lakes, IL 60088, USA
    Dent Mater 20:96-106. 2004
    ....
  38. ncbi request reprint Contraction stress and physical properties development of a resin-based composite irradiated using modulated curing methods at two C-factor levels
    Leonardo G Cunha
    Department of Restorative Dentistry, University of Campinas UNICAMP, Piracicaba, Sao Paulo, Brazil
    Dent Mater 24:392-8. 2008
    ..The objective of this study was to verify the influence of curing methods on contraction stress, stress rate and degree of conversion (DC) of a restorative composite at two C-factor levels...
  39. ncbi request reprint Flexural strength and Weibull analysis of a microhybrid and a nanofill composite evaluated by 3- and 4-point bending tests
    Sinval A Rodrigues
    Department of Operative Dentistry, Federal University of Pelotas, Pelotas, RS, Brazil
    Dent Mater 24:426-31. 2008
    ..The aim of the present study was to evaluate the flexural strength and the Weibull modulus of a microhybrid and a nanofill composite by means of 3- and 4-point bending tests...
  40. ncbi request reprint In vitro wear evaluation of dental materials in primary teeth
    Marcia Regina Bernardi da Cunha
    Department of Restorative Dentistry, Federal University of Paraiba, Brazil
    Am J Dent 19:364-9. 2006
    ..To evaluate the effect of dental materials on primary enamel wear...
  41. ncbi request reprint Three cements used for orthodontic banding of porcelain molars
    Tracy Herion
    Willamette Dental Group, Beaverton, Oregon, USA
    Angle Orthod 77:94-9. 2007
    ....
  42. ncbi request reprint Quantum yield of conversion of the photoinitiator camphorquinone
    Yin Chu Chen
    Wellman Center for Photomedicine, Massachusetts General Hospital, Harvard Medical School, Boston, MA, USA
    Dent Mater 23:655-64. 2007
    ..7 wt.% CQ with reducing agents 0.35 wt.% dimethylaminoethyl methacrylate (DMAEMA) and 0.05 wt.% butylated hydroxytoluene (BHT)) the quantum yield was measured as 0.07+/-0.01 CQ conversion per absorbed photon...
  43. ncbi request reprint Effect of filler fraction and filler surface treatment on wear of microfilled composites
    Bum Soon Lim
    Department of Dental Biomaterials, College of Dentistry, Seoul National University, Seoul, South Korea
    Dent Mater 18:1-11. 2002
    ..The aim of this study was to determine the effect of filler content and surface treatment on the wear of microfilled composites...
  44. ncbi request reprint In vitro wear of primary and permanent enamel. Simultaneous erosion and abrasion
    Gisele Maria Correr
    Department of Restorative Dentistry, Dental Material Area, Piracicaba Dental School, UNICAMP, Av Limeira, 901, CEP 13414 018, Piracicaba, SP, Brazil
    Am J Dent 20:394-9. 2007
    ..To evaluate the wear differences between primary and permanent enamel caused by the association of abrasion and erosion...