Mutlu Ozcan

Summary

Publications

  1. ncbi request reprint The effect of surface treatment on the shear bond strength of luting cement to a glass-infiltrated alumina ceramic
    M Ozcan
    Department of Prosthodontics, Faculty of Dentistry, Marmara University, Istanbul, Turkey
    Int J Prosthodont 14:335-9. 2001
  2. ncbi request reprint Bond strength of resin composite to differently conditioned amalgam
    M Ozcan
    Department of Dentistry and Dental Hygiene, University of Groningen, Faculty of Medical Sciences, Antonius Deusinglaan 1, 9713 AV, Groningen, The Netherlands
    J Mater Sci Mater Med 17:7-13. 2006
  3. ncbi request reprint A practical method for chairside repair of debonded porcelain denture teeth
    Mutlu Ozcan
    Faculty of Medical Sciences, Department of Dentistry and Oral Hygiene, University of Groningen, Antonius Deusinglaan 1, 9713 AV Groningen, The Netherlands
    J Prosthodont 15:47-50. 2006
  4. ncbi request reprint Fracture strength of direct surface-retained fixed partial dentures: effect of fiber reinforcement versus the use of particulate filler composites only
    Ovul Kumbuloglu
    Department of Prosthodontics, School of Dentistry, Ege University, Izmir, Turkey
    Dent Mater J 27:195-202. 2008
  5. doi request reprint Effect of composition, viscosity and thickness of the opaquer on the adhesion of resin composite to titanium
    Mutlu Ozcan
    University of Zurich, Dental Materials Unit, Center for Dental and Oral Medicine, Clinic for Fixed and Removable Prosthodontics and Dental Materials Science, Plattenstrasse 11, CH 8032, Zurich, Switzerland
    Dent Mater 25:1248-55. 2009
  6. doi request reprint Effect of polishing instruments and polishing regimens on surface topography and phase transformation of monolithic zirconia: An evaluation with XPS and XRD analysis
    Nadin Al-Haj Husain
    University of Zurich, Dental Materials Unit, Center for Dental and Oral Medicine, Clinic for Fixed and Removable Prosthodontics and Dental Materials Science, Plattenstrasse 11, CH 8032 Zurich, Switzerland Electronic address
    J Mech Behav Biomed Mater 64:104-12. 2016
  7. doi request reprint Bleaching induced tooth sensitivity: do the existing enamel craze lines increase sensitivity? A clinical study
    Mutlu Ozcan
    Dental Materials Unit, Center for Dental and Oral Medicine, Clinic for Fixed and Removable Prosthodontics and Dental Materials Science, University of Zurich, Plattenstrasse 11, 8032, Zurich, Switzerland
    Odontology 102:197-202. 2014
  8. pmc Microhardness of dual-polymerized resin cement around a translucent fiber post in the intraradicular environment
    Mutlu Ozcan
    University of Zurich, Head of Dental Materials Unit, Center for Dental and Oral Medicine, Clinic for Fixed and Removable Prosthodontics and Dental Materials Science, Zurich, Switzerland
    J Conserv Dent 14:370-3. 2011
  9. doi request reprint Effect of different surface treatments on adhesion of In-Ceram Zirconia to enamel and dentin substrates
    Samah Saker
    Mansoura University, Egypt
    J Adhes Dent 15:369-76. 2013
  10. doi request reprint Does rinsing following particle deposition methods have a negative effect on adhesion to titanium?
    Mutlu Ozcan
    University of Zurich, Zurich, Switzerland
    J Adhes Dent 15:307-10. 2013

Detail Information

Publications136 found, 100 shown here

  1. ncbi request reprint The effect of surface treatment on the shear bond strength of luting cement to a glass-infiltrated alumina ceramic
    M Ozcan
    Department of Prosthodontics, Faculty of Dentistry, Marmara University, Istanbul, Turkey
    Int J Prosthodont 14:335-9. 2001
    ..The aim of this study was to evaluate the effect of three different surface treatments on the bond strength of four different luting cements--three bis-GMA-based resin cements and a compomer cement--to In-Ceram...
  2. ncbi request reprint Bond strength of resin composite to differently conditioned amalgam
    M Ozcan
    Department of Dentistry and Dental Hygiene, University of Groningen, Faculty of Medical Sciences, Antonius Deusinglaan 1, 9713 AV, Groningen, The Netherlands
    J Mater Sci Mater Med 17:7-13. 2006
    ..001; for group 2, p=0.013; for group 3, p=0.002; for group 4, p=0.026; for group 5, p=0.002; for group 6, p<0.001 and for group 7, p<0.001)...
  3. ncbi request reprint A practical method for chairside repair of debonded porcelain denture teeth
    Mutlu Ozcan
    Faculty of Medical Sciences, Department of Dentistry and Oral Hygiene, University of Groningen, Antonius Deusinglaan 1, 9713 AV Groningen, The Netherlands
    J Prosthodont 15:47-50. 2006
    ..In this article an alternative chairside method, based on silica coating and silanization for adhesion of denture tooth porcelain to polymethylmethacrylate is described...
  4. ncbi request reprint Fracture strength of direct surface-retained fixed partial dentures: effect of fiber reinforcement versus the use of particulate filler composites only
    Ovul Kumbuloglu
    Department of Prosthodontics, School of Dentistry, Ege University, Izmir, Turkey
    Dent Mater J 27:195-202. 2008
    ..05) and all the other FRC-reinforced groups (p < 0.05). Complete pontic fracture was 100% and 70% for PFC2 and PFC3 respectively...
  5. doi request reprint Effect of composition, viscosity and thickness of the opaquer on the adhesion of resin composite to titanium
    Mutlu Ozcan
    University of Zurich, Dental Materials Unit, Center for Dental and Oral Medicine, Clinic for Fixed and Removable Prosthodontics and Dental Materials Science, Plattenstrasse 11, CH 8032, Zurich, Switzerland
    Dent Mater 25:1248-55. 2009
    ....
  6. doi request reprint Effect of polishing instruments and polishing regimens on surface topography and phase transformation of monolithic zirconia: An evaluation with XPS and XRD analysis
    Nadin Al-Haj Husain
    University of Zurich, Dental Materials Unit, Center for Dental and Oral Medicine, Clinic for Fixed and Removable Prosthodontics and Dental Materials Science, Plattenstrasse 11, CH 8032 Zurich, Switzerland Electronic address
    J Mech Behav Biomed Mater 64:104-12. 2016
    ..This study investigated the topographical features and phase transformation in MZ after polishing with different regimens simulating the clinical workflow. ​..
  7. doi request reprint Bleaching induced tooth sensitivity: do the existing enamel craze lines increase sensitivity? A clinical study
    Mutlu Ozcan
    Dental Materials Unit, Center for Dental and Oral Medicine, Clinic for Fixed and Removable Prosthodontics and Dental Materials Science, University of Zurich, Plattenstrasse 11, 8032, Zurich, Switzerland
    Odontology 102:197-202. 2014
    ..Patients who would undergo in-office bleaching should be informed that tooth sensitivity is a very often side effect but it may disappear within 1 week...
  8. pmc Microhardness of dual-polymerized resin cement around a translucent fiber post in the intraradicular environment
    Mutlu Ozcan
    University of Zurich, Head of Dental Materials Unit, Center for Dental and Oral Medicine, Clinic for Fixed and Removable Prosthodontics and Dental Materials Science, Zurich, Switzerland
    J Conserv Dent 14:370-3. 2011
    ..In this study, we evaluated the effect of photopolymerization on Vickers microhardness of dual-polymerized resin cement at three locations when a translucent quartz fiber post was used...
  9. doi request reprint Effect of different surface treatments on adhesion of In-Ceram Zirconia to enamel and dentin substrates
    Samah Saker
    Mansoura University, Egypt
    J Adhes Dent 15:369-76. 2013
    ..Resin bonding of In-Ceram Zirconia (ICZ) ceramics is still a challenge, especially for minimally invasive applications. This study evaluated the adhesion of ICZ to enamel and dentin after different surface treatments of the ceramic...
  10. doi request reprint Does rinsing following particle deposition methods have a negative effect on adhesion to titanium?
    Mutlu Ozcan
    University of Zurich, Zurich, Switzerland
    J Adhes Dent 15:307-10. 2013
    ..This study evaluated whether air blasting or rinsing particle remnants with water would impair adhesion of resin composite to metal...
  11. doi request reprint Repair bond strength of microhybrid, nanohybrid and nanofilled resin composites: effect of substrate resin type, surface conditioning and ageing
    Mutlu Ozcan
    Dental Materials Unit, Center for Dental and Oral Medicine, Clinic for Fixed and Removable Prosthodontics and Dental Materials Science, University of Zurich, Plattenstrasse 11, 8032, Zurich, Switzerland
    Clin Oral Investig 17:1751-8. 2013
    ....
  12. doi request reprint Effect of surface conditioning modalities on the repair bond strength of resin composite to the zirconia core / veneering ceramic complex
    Mutlu Ozcan
    University of Zurich, Zurich, Switzerland
    J Adhes Dent 15:207-10. 2013
    ..This study evaluated the effect of different surface conditioning protocols on the repair strength of resin composite to the zirconia core / veneering ceramic complex, simulating the clinical chipping phenomenon...
  13. doi request reprint Effect of particle deposition parameters on silica coating of zirconia using a chairside air-abrasion device
    Mutlu Ozcan
    University of Zurich, Zurich, Switzerland
    J Adhes Dent 15:211-4. 2013
    ..To evaluate the effect of nozzle distance, nozzle angle, and deposition duration on the silica content attained on zirconia by air abrasion...
  14. doi request reprint Effect of air-particle abrasion protocols on the biaxial flexural strength, surface characteristics and phase transformation of zirconia after cyclic loading
    Mutlu Ozcan
    University of Zurich, Dental Materials Unit, Center for Dental and Oral Medicine, Clinic for Fixed and Removable Prosthodontics and Dental Materials Science, Plattenstrasse 11, CH 8032, Zurich, Switzerland
    J Mech Behav Biomed Mater 20:19-28. 2013
    ..59μm). Air-abrasion protocols increased the roughness and monoclinic phase but in turn abrasion with 30μm Al2O3 particles coated with silica has increased the biaxial flexural strength of the tested zirconia...
  15. doi request reprint Effect of different adhesion strategies on bond strength of resin composite to composite-dentin complex
    M Ozcan
    University of Zurich, Center for Dental and Oral Medicine, Clinic for Fixed and Removable Prosthodontics and Dental Materials Science, Zurich, Switzerland
    Oper Dent 38:63-72. 2013
    ....
  16. ncbi request reprint Fracture resistance of direct inlay-retained adhesive bridges: effect of pontic material and occlusal morphology
    Mutlu Ozcan
    University of Zurich, Center for Dental and Oral Medicine, Clinic for Fixed and Removable Prosthodontics and Dental Materials Science, Zurich, Switzerland
    Dent Mater J 31:514-22. 2012
    ..05) (Tukey's test). No significant difference was found between Group i (1,750 N) and Group ii (1,790 N). Not the pontic material but the occlusal morphology affects the fracture resistance of FRC FDPs...
  17. doi request reprint Load-bearing capacity of indirect inlay-retained fixed dental prostheses made of particulate filler composite alone or reinforced with E-glass fibers impregnated with various monomers
    Mutlu Ozcan
    University of Zurich, Dental Materials Unit, Center for Dental and Oral Medicine, Clinic for Fixed and Removable Prosthodontics and Dental Materials Science, Plattenstrasse 11, CH 8032 Zurich, Switzerland
    J Mech Behav Biomed Mater 12:160-7. 2012
    ....
  18. doi request reprint Adhesion of conventional and simplified resin-based luting cements to superficial and deep dentin
    Mutlu Ozcan
    Dental Materials Unit, Center for Dental and Oral Medicine, Clinic for Fixed and Removable Prosthodontics and Dental Materials Science, University of Zurich, Plattenstrasse 11, CH 8032 Zurich, Switzerland
    Clin Oral Investig 16:1081-8. 2012
    ..Simplified cements and RMGIC as control material showed inferior adhesion to superficial and deep dentin compared to conventional resin cements tested...
  19. ncbi request reprint Clinical study on the reasons for and location of failures of metal-ceramic restorations and survival of repairs
    Mutlu Ozcan
    Department of Prosthodontics, Dentistry Faculty, Marmara University, Istanbul, Turkey
    Int J Prosthodont 15:299-302. 2002
    ..This study determined the reasons for and locations of failures of metal-ceramic restorations and evaluated the survival of the intraoral silica-coating system used for the repair of failed restorations...
  20. ncbi request reprint The use of chairside silica coating for different dental applications: a clinical report
    Mutlu Ozcan
    Faculty of Dentistry, Marmara University, Istanbul, Turkey
    J Prosthet Dent 87:469-72. 2002
    ..This article describes an alternative approach to conditioning an alloy surface prior to veneering with composite. The procedure is based on silica coating and silanization of the alloy surface, which can be performed chairside...
  21. ncbi request reprint New approach to bonding all-ceramic adhesive fixed partial dentures: a clinical report
    Mutlu Ozcan
    Faculty of Dentistry, Marmara University, Istanbul, Turkey
    J Prosthet Dent 88:252-4. 2002
    ..This clinical report describes the use of intraoral silica coating and silanization in an alternative bonding procedure for a 3-unit, all-ceramic, resin-bonded fixed partial denture...
  22. ncbi request reprint Evaluation of alternative intra-oral repair techniques for fractured ceramic-fused-to-metal restorations
    M Ozcan
    Marmara University, Dentistry Faculty, Department of Prosthodontics, Buyukciftlik sok, Nisantasi, Istanbul, Turkey
    J Oral Rehabil 30:194-203. 2003
    ....
  23. ncbi request reprint Fracture reasons in ceramic-fused-to-metal restorations
    M Ozcan
    Dentistry Faculty, Department of Prosthodontics, Marmara University, Istanbul, Turkey
    J Oral Rehabil 30:265-9. 2003
    ..The published literature reveals that reasons for failures cover a wide spectrum from iatrogenic factors to laboratory mistakes or because of factors related to the inherent structure of the ceramics or simply to trauma...
  24. ncbi request reprint The effect of disinfectant agents in eliminating the contamination of dental unit water
    M Ozcan
    Department of Prosthodontics, Dentistry Faculty, Marmara University, Istanbul, Turkey
    J Oral Rehabil 30:290-4. 2003
    ..In conclusion, when used daily, both disinfectants prevent the development of bacterial contamination after first and second weeks with no significant differences (P=0.35)...
  25. ncbi request reprint The efficacy of two prototype chewing gums for the removal of extrinsic tooth stain
    M Ozcan
    Int Dent J 53:62-6. 2003
    ..To compare the potential efficacy of two prototype chewing gums in extrinsic stain removal on natural teeth...
  26. ncbi request reprint Effect of surface conditioning methods on the bond strength of luting cement to ceramics
    Mutlu Ozcan
    Department of Dentistry and Oral Hygiene, Faculty of Medical Sciences, University of Groningen, Antonius Deusinglaan 1, 9713 AV, Groningen, The Netherlands
    Dent Mater 19:725-31. 2003
    ..This study evaluated the effect of three different surface conditioning methods on the bond strength of a Bis-GMA based luting cement to six commercial dental ceramics...
  27. ncbi request reprint The attitude of complete denture wearers towards denture adhesives in Istanbul
    M Ozcan
    Department of Dentistry and Dental Hygeine, University of Groningen, Groningen, The Netherlands
    J Oral Rehabil 31:131-4. 2004
    ....
  28. ncbi request reprint Effect of drying time of 3-methacryloxypropyltrimethoxysilane on the shear bond strength of a composite resin to silica-coated base/noble alloys
    Mutlu Ozcan
    Department of Dentistry and Dental Hygiene, Faculty of Medical Sciences, University of Groningen, Antonius Deusinglaan 1, NL 9713 AV, The Netherlands
    Dent Mater 20:586-90. 2004
    ....
  29. ncbi request reprint Bonding polycarbonate brackets to ceramic: effects of substrate treatment on bond strength
    Mutlu Ozcan
    University of Groningen, Faculty of Medical Sciences, Department of Dentistry and Dental Hygiene, Groningen, The Netherlands
    Am J Orthod Dentofacial Orthop 126:220-7. 2004
    ..The types of failures observed after debonding indicated that the critical parameter was the strength of the adhesive joint of the luting cement to both the bracket and the ceramic...
  30. ncbi request reprint Effect of three surface conditioning methods to improve bond strength of particulate filler resin composites
    M Ozcan
    Faculty of Medical Sciences, Department of Dentistry and Dental Hygiene, University of Groningen, Groningen, 9713 AV, The Netherlands
    J Mater Sci Mater Med 16:21-7. 2005
    ..0-22.5 MPa) or silica coating (25.5-41.8 MPa) in dry conditions (ANOVA, p < 0.001). After thermocycling, the silica coating process resulted in the highest bond values in all material groups (17.2-30.3 MPa)...
  31. ncbi request reprint The effect of box preparation on the strength of glass fiber-reinforced composite inlay-retained fixed partial dentures
    Mutlu Ozcan
    Department of Dentistry and Dental Hygiene, University of Groningen, The Netherlands
    J Prosthet Dent 93:337-45. 2005
    ..Nonstandardized box dimensions for inlay-retained fixed partial dentures (FPDs) may result in uneven distribution of the forces on the connector region of such restorations...
  32. ncbi request reprint The effect of a new denture adhesive on bite force until denture dislodgement
    Mutlu Ozcan
    Faculty of Medical Sciences, Department of Dentistry and Dental Hygiene, University of Groningen, Groningen, The Netherlands
    J Prosthodont 14:122-6. 2005
    ..The purpose of this investigation was to establish the effect of a new denture adhesive on maximum bite force until denture dislodgement (BFDD) after adhesive application...
  33. ncbi request reprint Comparison of repair methods for ceramic-fused-to-metal crowns
    Mutlu Ozcan
    Faculty of Medical Sciences, Department of Dentistry and Dental Hygiene, University of Groningen, Groningen, The Netherlands
    J Prosthodont 15:283-8. 2006
    ..The objective of this study was to evaluate the effect of four repair methods on the fracture load of repaired ceramic-fused-to-metal crowns...
  34. ncbi request reprint Effect of surface conditioning methods on the microtensile bond strength of resin composite to composite after aging conditions
    Mutlu Ozcan
    University Medical Center Groningen, University of Groningen, Department of Dentistry and Dental Hygiene, Clinical Dental Biomaterials, Antonius Deusinglaan 1, 9713 AV Groningen, The Netherlands
    Dent Mater 23:1276-82. 2007
    ..This study evaluated the effect of two different surface conditioning methods on the repair bond strength of a bis-GMA-adduct/bis-EMA/TEGDMA based resin composite after three aging conditions...
  35. ncbi request reprint Comparison of resin cement adhesion to Y-TZP ceramic following manufacturers' instructions of the cements only
    Mutlu Ozcan
    Department of Dentistry and Dental Hygiene, Clinical Dental Biomaterials, University Medical Centre Groningen, University of Groningen, Antonius Deusinglaan 1, 9713 AV Groningen, The Netherlands
    Clin Oral Investig 12:279-82. 2008
    ..6+/-4.1 MPa). When manufacturers' instructions of the resin cements were followed, no adhesion (0 MPa) was achieved on the zirconia after 6,000 thermal cyclings including Panavia F 2.0...
  36. doi request reprint Evaluation of failure characteristics and bond strength after ceramic and polycarbonate bracket debonding: effect of bracket base silanization
    M Ozcan
    Department of Dentistry and Dental Hygiene, Clinical Dental Biomaterials, University Medical Centre Groningen, The Netherlands
    Eur J Orthod 30:176-82. 2008
    ..0227) brackets. Failure type was not significantly different when brackets were debonded with a universal testing machine or with orthodontic debonding pliers. No enamel damage was observed in any of the groups...
  37. ncbi request reprint Effect of various surface conditioning methods on the adhesion of dual-cure resin cement with MDP functional monomer to zirconia after thermal aging
    Mutlu Ozcan
    Clinical Dental Biomaterials, Department of Dentistry and Dental Hygiene, University Medical Center Groningen, University of Groningen, Antonius Deusinglaan 1, 9713 AV, Groningen, The Netherlands
    Dent Mater J 27:99-104. 2008
    ..43+/-1.3, 8.98+/-3.6, 12.02+/-6.7, and 8.23+/-3.8 MPa) (p=0.1357). Therefore, the performance of chairside conditioning methods used for zirconia was on par with the laboratory alternative tested...
  38. ncbi request reprint Fracture strength of fiber-reinforced surface-retained anterior cantilever restorations
    Mutlu Ozcan
    University Medical Center Groningen, University of Groningen, Department of Dentistry and Dental Hygiene, Clinical Dental Biomaterials, Groningen, The Netherlands
    Int J Prosthodont 21:228-32. 2008
    ..Failure types were also evaluated...
  39. doi request reprint Bond strength durability of a resin composite on a reinforced ceramic using various repair systems
    Mutlu Ozcan
    University Medical Center Groningen, Department of Dentistry and Dental Hygiene, Clinical Dental Biomaterials, Antonius Deusinglaan 1, 9713 AV Groningen, The Netherlands
    Dent Mater 25:1477-83. 2009
    ..This study compared the durability of repair bond strength of a resin composite to a reinforced ceramic after three repair systems...
  40. doi request reprint Effect of ultrasonic versus manual cementation on the fracture strength of resin composite laminates
    M Ozcan
    University Medical Center Groningen, University of Groningen, Department of Dentistry and Dental Hygiene, Clinical Dental Biomaterials, Groningen, The Netherlands
    Oper Dent 34:437-42. 2009
    ..The two cementation techniques did not effect the fracture strength of composite laminates, but failure types varied between groups, being more favorable for the ultrasonically cemented group...
  41. ncbi request reprint Fracture strength of indirect resin composite laminates to teeth with existing restorations: an evaluation of conditioning protocols
    Mutlu Ozcan
    Clinical Dental Materials, Department of Dentistry and Dental Hygiene, University Medical Center Groningen, University of Groningen, Antonius Deusinglaan 1, Groningen, The Netherlands
    J Adhes Dent 11:391-7. 2009
    ..This study evaluated the fracture strength and failure types of indirect resin-based composite laminates bonded to teeth with aged Class III composite restorations that were conditioned according to various protocols...
  42. doi request reprint Effect of aging conditions on the repair bond strength of a microhybrid and a nanohybrid resin composite
    Mutlu Ozcan
    University of Zurich, Center for Dental and Oral Medicine, Dental Material Sciences, Zurich, Switzerland
    J Adhes Dent 12:451-9. 2010
    ..this study evaluated the effect of different aging methods on the repair bond strength and failure types of a microhybrid and a nanohybrid composite...
  43. doi request reprint Bond strength comparison of amalgam repair protocols using resin composite in situations with and without dentin exposure
    Mutlu Ozcan
    University of Zurich, Center for Dental and Oral Medicine, Dental Materials Unit, Clinic for Fixed and Removable Prosthodontics and Dental Materials Science, Zurich, Switzerland
    Oper Dent 35:655-62. 2010
    ..Finally, the amalgam should be silanized and primer/bonding applied onto the dentin...
  44. doi request reprint Early bond strength of two resin cements to Y-TZP ceramic using MPS or MPS/4-META silanes
    Mutlu Ozcan
    Dental Materials Unit, Center for Dental and Oral Medicine Clinic for Fixed and Removable Prosthodontics and Dental Materials Science, University of Zurich, Plattenstrasse 11, CH 8032, Zurich, Switzerland
    Odontology 99:62-7. 2011
    ..Use of chairside silica coating and silanization to condition the zirconia surface improved adhesion compared with the manufacturers' cementation protocols for SuperBond and Panavia F 2.0 resin cements...
  45. doi request reprint Effects of different surface conditioning methods on the bond strength of composite resin to amalgam
    M Ozcan
    University of Zurich, Zurich, Switzerland
    Oper Dent 36:318-25. 2011
    ..05). Surface conditioning techniques affected the bond strengths of composite adhesion to amalgam. Experimental opaquer exhibited lower values. Leaving a small border of enamel around the restoration decreased the bond strength...
  46. doi request reprint A technical report on repair of amalgam-dentin complex
    M Ozcan
    Center for Dental and Oral Medicine, University of Zurich, Zurich, Switzerland
    Oper Dent 36:563-6. 2011
    ..The fractured buccal cusp was modeled using resin composite (Clearfil Photo Posterior) and photo-polymerized. Finally, the amalgam was refinished and refurbished and the composite was finished and polished...
  47. ncbi request reprint Effect of silane coupling agents and alloy primers on adhesion to titanium
    M Ozcan
    Unit of Dental Materials, University of Zurich, Zurich, Switzerland
    Minerva Stomatol 60:427-34. 2011
    ..This study evaluated the adhesion of resin composite to titanium alloy using different silane coupling agents and alloy primers in combination with surface conditioning methods after aging...
  48. doi request reprint Possible hazardous effects of hydrofluoric acid and recommendations for treatment approach: a review
    Mutlu Ozcan
    University of Zurich, Dental Materials Unit, Center for Dental and Oral Medicine, Clinic for Fixed and Removable Prosthodontics and Dental Materials Science, Plattenstrasse 11, CH 8032, Zurich, Switzerland
    Clin Oral Investig 16:15-23. 2012
    ..Especially the clinicians, who often deal with adhesive cementation or repair of glass ceramics, should take necessary precautions for possible hazards of HF...
  49. doi request reprint Effect of surface conditioning with airborne-particle abrasion on the tensile strength of polymeric CAD/CAM crowns luted with self-adhesive and conventional resin cements
    Bogna Stawarczyk
    Clinic of Fixed and Removable Prosthodontics and Dental Material Science, Center of Dental Medicine, University of Zurich, Zurich, Switzerland
    J Prosthet Dent 107:94-101. 2012
    ..Adhesively bonded, industrially polymerized resins have been suggested as definitive restorative materials. It is claimed that such resins present similar mechanical properties to glass ceramic...
  50. ncbi request reprint Bond strength of two resin cements to titanium after different surface conditioning methods
    Mutlu Ozcan
    University of Zurich, Head of Dental Materials Unit, Center for Dental and Oral Medicine Clinic for Fixed and Removable Prosthodontics and Dental Materials Science, Switzerland
    Gen Dent 60:e6-e12. 2012
    ....
  51. doi request reprint Randomized controlled split-mouth clinical trial of direct laminate veneers with two micro-hybrid resin composites
    Marco M M Gresnigt
    Department of Fixed and Removable Prosthodontics, Center for Dentistry and Oral Hygiene, University of Groningen, University Medical Center Groningen, The Netherlands
    J Dent 40:766-75. 2012
    ..This randomized, split-mouth clinical study evaluated the survival rate of direct laminate veneers made of two resin-composite materials...
  52. doi request reprint Impact of Gluma Desensitizer on the tensile strength of zirconia crowns bonded to dentin: an in vitro study
    Bogna Stawarczyk
    Clinic of Fixed and Removable Prosthodontics and Dental Material Science, Center of Dental Medicine, University of Zurich, Plattenstrasse 11, 8032, Zurich, Switzerland
    Clin Oral Investig 16:201-13. 2012
    ..In this study, self-adhesive resin cements combined with Gluma Desensitizer reached better long-term stability compared to PAN and PAN-G after chewing simulation...
  53. doi request reprint Comparison of alternative adhesive cementation concepts for zirconia ceramic: glaze layer vs zirconia primer
    Cenk Cura
    Department of Prosthodontics, Ege University, School of Dentistry, Izmir, Turkey
    J Adhes Dent 14:75-82. 2012
    ..This study evaluated the bond strength of silane/adhesive/resin cement and zirconia primer/resin cement combinations on non-glazed and glazed zirconia surfaces before and after aging...
  54. ncbi request reprint Adhesive properties of bonded orthodontic retainers to enamel: stainless steel wire vs fiber-reinforced composites
    Dave Lie Sam Foek
    Department of Orthodontics, University Medical Center Groningen, University of Groningen, The Netherlands
    J Adhes Dent 11:381-90. 2009
    ....
  55. doi request reprint Two-body wear rate of CAD/CAM resin blocks and their enamel antagonists
    Bogna Stawarczyk
    Clinic of Fixed and Removable Prosthodontics and Dental Material Science, Center of Dental Medicine, University of Zurich, Zurich, Switzerland
    J Prosthet Dent 109:325-32. 2013
    ..Computer-aided design and computer-aided manufacturing (CAD/CAM) resins exhibit good mechanical properties and can be used as long-term restorations. The wear rate of such resins and their enamel antagonists is unknown...
  56. doi request reprint Bonding of glass ceramic and indirect composite to non-aged and aged resin composite
    Marco Gresnigt
    University Medical Center Groningen, Center for Dentistry and Oral Hygiene, Department Oral Function, Implantology and Critical Dental Biomaterials, Groningen, The Netherlands
    J Adhes Dent 14:59-68. 2012
    ..This study evaluated bond strength of non-aged and aged resin composite to an indirect resin composite and pressed glass ceramic using two resin cements...
  57. ncbi request reprint Comparison of two bond strength testing methodologies for bilayered all-ceramics
    Mine Dundar
    Ege University, School of Dentistry, Department of Prosthodontics, Izmir, Turkey
    Dent Mater 23:630-6. 2007
    ..This study compared the shear bond strength (SBS) and microtensile (MTBS) testing methodologies for core and veneering ceramics in four types of all-ceramic systems...
  58. ncbi request reprint Effect of physical and physicochemical surface treatment methods on the tensile strength of CAD/CAM-fabricated zirconia posts and cores luted to root canals
    Cumhur Sipahi
    Department of Prosthodontics, Academic Center for Dental Sciences, Gulhane Military Medical Academy, Ankara, Turkey
    Int J Periodontics Restorative Dent 31:e64-70. 2011
    ..034). No significant difference was found between treatment methods. Failure types varied depending on the surface treatment method...
  59. doi request reprint Effect of surface conditioning and taper angle on the retention of IPS e.max Press crowns
    Manal M A Madina
    Department of Conservative Dentistry, Mansoura University, Faculty of Dentistry, Mansoura, Egypt
    J Prosthodont 19:200-4. 2010
    ..The objective of this study was to evaluate the retentive strength of single-unit crowns with 10 degrees and 26 degrees taper angles cemented using two surface conditioning methods...
  60. doi request reprint Load-bearing capacity and failure types of anterior zirconia crowns veneered with overpressing and layering techniques
    Bogna Stawarczyk
    Clinic of Fixed and Removable Prosthodontics and Dental Materials Science, Centre of Dental Medicine, University of Zurich, Switzerland
    Dent Mater 27:1045-53. 2011
    ..The aim of this study was to test whether the load bearing capacity of anterior zirconia crowns veneered with overpressed or layered, is similar and to evaluate the failure types...
  61. ncbi request reprint A preliminary report on short-term clinical outcomes of three-unit resin-bonded fixed prostheses using two adhesive cements and surface conditioning combinations
    Mine Dundar
    Department of Prosthodontics, Ege University, School of Dentistry, Bornova, Izmir, Turkey
    Int J Prosthodont 23:353-60. 2010
    ..The aim of this study was to evaluate the survival rate of three-unit surface-retained, resin-bonded, metal-ceramic fixed dental prostheses (RBFDP) using two adhesive cements and two surface conditioning methods...
  62. doi request reprint Marginal quality and fracture strength of root-canal treated mandibular molars with overlay restorations after thermocycling and mechanical loading
    Mustafa Dere
    Clinic of Preventive Dentistry, Periodontology and Cariology, Center for Dental and Oral Medicine, University of Zurich, Switzerland
    J Adhes Dent 12:287-94. 2010
    ..To evaluate marginal quality, fracture modes, and loads-to-failure of different overlay restorations in rootcanal treated molars in a laboratory setup...
  63. doi request reprint The impact of in vitro aging on the mechanical and optical properties of indirect veneering composite resins
    Bogna Stawarczyk
    Clinic of Fixed and Removable Prosthodontics and Dental Material Science, Center of Dental Medicine, University of Zurich, Switzerland
    J Prosthet Dent 106:386-98. 2011
    ..Recently introduced veneering resins are purported to have enhanced mechanical properties due to their composition, but their long-term durability is not known...
  64. ncbi request reprint Radiopacity of different shades of resin-based restorative materials compared to human and bovine teeth
    Gurel Pekkan
    Faculty of Dentistry, Department of Prosthodontics, Dumlupinar University, Kutahya, Turkey
    Gen Dent 60:e237-43. 2012
    ..Every shade of nanocomposite material other than Aelite Aesthetic Enamel Incisal LT Gray showed comparable radiopacity to human dentin. Other materials tested demonstrated higher radiopacity compared to human dentin and bovine enamel...
  65. doi request reprint The fracture load and failure types of veneered anterior zirconia crowns: an analysis of normal and Weibull distribution of complete and censored data
    Bogna Stawarczyk
    Clinic of Fixed and Removable Prosthodontics and Dental Material Science, Center of Dental Medicine, University of Zurich, Switzerland
    Dent Mater 28:478-87. 2012
    ..The aim of this study was to compare the fracture load of veneered anterior zirconia crowns using normal and Weibull distribution of complete and censored data...
  66. pmc Effects of surface conditioning on repair bond strengths of non-aged and aged microhybrid, nanohybrid, and nanofilled composite resins
    Margareta Rinastiti
    Department of Biomedical Engineering, University Medical Center Groningen, University of Groningen, Groningen, The Netherlands
    Clin Oral Investig 15:625-33. 2011
    ..In addition, SC-application led to more cohesive failures than after IAR-application, regardless the aging method...
  67. doi request reprint Load-bearing capacity of CAD/CAM milled polymeric three-unit fixed dental prostheses: effect of aging regimens
    Bogna Stawarczyk
    Clinic of Fixed and Removal Prosthodontics and Dental Material Science, Center of Dental Medicine, University of Zurich, Plattenstrasse 11, Zurich 8032, Switzerland
    Clin Oral Investig 16:1669-77. 2012
    ..This study tested the fracture load of milled and conventionally fabricated polymeric and glass-ceramic three-unit fixed dental prostheses (FDPs) after aging...
  68. doi request reprint Influence of fluoride- or triclosan-based desensitizing agents on adhesion of resin cements to dentin
    Mine Dundar
    Department of Prosthodontics, School of Dentistry, Ege University, 35100 Bornova, Izmir, Turkey
    Clin Oral Investig 14:579-86. 2010
    ..Both F and T desensitizers can be safely used prior to final cementation but F in combination with V seems to be more reliable, considering both the bond strength and the failure types...
  69. doi request reprint Immediate repair bond strengths of microhybrid, nanohybrid and nanofilled composites after different surface treatments
    Margareta Rinastiti
    Department of Biomedical Engineering, University Medical Center Groningen, University of Groningen, 9713 AV Groningen, The Netherlands
    J Dent 38:29-38. 2010
    ..To evaluate immediate repair bond strengths and failure types of resin composites with and without surface conditioning and characterize the interacting composite surfaces by their surface composition and roughness...
  70. doi request reprint Marginal adaptation and fracture resistance of root-canal treated mandibular molars with intracoronal restorations: effect of thermocycling and mechanical loading
    Thomas Hitz
    Clinic for Fixed and Removable Prosthodontics and Dental Material Science, Center for Dental and Oral Medicine, University of Zurich, Switzerland
    J Adhes Dent 12:279-86. 2010
    ..This study evaluated the marginal adaptation, fracture modes, and loads to failure of different mesio-occlusal- distal (MOD) restorations in root canal treated molars in vitro...
  71. ncbi request reprint Fracture load and failure analysis of zirconia single crowns veneered with pressed and layered ceramics after chewing simulation
    Bogna Stawarczyk
    Clinic of Fixed and Removable Prosthodontics and Dental Material Science, Center of Dental Medicine, University of Zurich, Plattenstrasse 11, Zurich, Switzerland
    Dent Mater J 30:554-62. 2011
    ..The mean values of all other groups were not significantly different. Single zirconia crowns veneered with overpressed ceramics exhibited lower fracture load than those of the layered ones after chewing simulation...
  72. doi request reprint Could digital imaging be an alternative for digital colorimeters?
    Alper Caglar
    Faculty of Dentistry, Department of Prosthetic Dentistry, Baskent University, Ankara, Turkey
    Clin Oral Investig 14:713-8. 2010
    ..However, variations in shade guides, especially for composites, may affect the correlation...
  73. doi request reprint Randomized clinical trial of indirect resin composite and ceramic veneers: up to 3-year follow-up
    Marco M Gresnigt
    Department of Fixed and Removable Prosthodontics, University Medical Center, Groningen, The Netherlands
    J Adhes Dent 15:181-90. 2013
    ..This randomized controlled split-mouth clinical trial evaluated the short-term survival rate of indirect resin composite and ceramic laminate veneers...
  74. ncbi request reprint Radiopacity of different resin-based and conventional luting cements compared to human and bovine teeth
    Gurel Pekkan
    Dumlupinar University, Faculty of Dentistry, Tavşanlı yolu 10 km, 43270 Kutahya, Turkey
    Dent Mater J 31:68-75. 2012
    ..Since all examined resin-based luting materials showed radiopacity values equivalent to or greater than that of human and bovine dentin, they could be considered suitable for the restorations cemented on dentin...
  75. doi request reprint Evaluation of bond strength of various margin ceramics to a zirconia ceramic
    M Erhan Comlekoglu
    Ege University, School of Dentistry, Department of Prosthodontics, Izmir, Turkey
    J Dent 36:822-7. 2008
    ..This study evaluated the bond strengths of four different margin ceramics based on fluoroapatite and feldspath to a zirconia ceramic...
  76. ncbi request reprint Interfacial shear bond strength between different base metal alloys and five low fusing feldspathic ceramic systems
    Cumhur Sipahi
    Department of Prosthodontics, Academic Center for Dental Sciences, Gulhane Military Medical Academy, Ankara, Turkey
    Dent Mater J 31:333-7. 2012
    ..05). Ceramco II presented the highest bond strength with both Ni-Cr and Co-Cr being significantly different from one another...
  77. doi request reprint Effect of dental arch convexity and type of archwire on frictional forces
    Zacharias Fourie
    Department of Orthodontics, University Medical Center Groningen, University of Groningen, Groningen, The Netherlands
    Am J Orthod Dentofacial Orthop 136:14.e1-7; discussion 14-5. 2009
    ..The objectives of this study were to compare the frictional forces generated in conventional flat and convex dental arch setups, and to evaluate the effect of different archwires on friction in both dental arch models...
  78. ncbi request reprint Fracture strength of direct versus indirect laminates with and without fiber application at the cementation interface
    Marco M M Gresnigt
    University Medical Center Groningen, University of Groningen, Department of Dentistry and Dental Hygiene, Clinical Dental Biomaterials, Antonius Deusinglaan 1, Groningen, The Netherlands
    Dent Mater 23:927-33. 2007
    ..This study compared the fracture strength of direct and indirect resin composite laminate veneers and evaluated the effect of a bidirectional E-glass woven fiber application at different locations at the cementation interface...
  79. ncbi request reprint Resonance frequency analysis assessment of implant stability in labial onlay grafted posterior mandibles: a pilot clinical study
    Yasar Ozkan
    Department of Oral and Maxillofacial Surgery, University of Marmara, Istanbul, Turkey
    Int J Oral Maxillofac Implants 22:235-42. 2007
    ....
  80. doi request reprint Repair of silorane composite--using the same substrate or a methacrylate-based composite?
    Annette Wiegand
    Clinic for Preventive Dentistry, Periodontology and Cariology, University of Zurich, Plattenstrasse 11, CH 8032 Zurich, Switzerland
    Dent Mater 28:e19-25. 2012
    ..The study aimed to analyze the shear bond strength of aged silorane composite repaired with the same substrate or a conventional methacrylate-based composite after different mechanical and adhesive surface treatments...
  81. doi request reprint Pilot study of unidirectional E-glass fibre-reinforced composite resin splints: up to 4.5-year clinical follow-up
    Ovul Kumbuloglu
    Department of Prosthodontics, Ege University, School of Dentistry, Izmir, Turkey
    J Dent 39:871-7. 2011
    ..This prospective clinical pilot study evaluated the performance of fibre-reinforced-composite resin (FRC) splints on mandibular anterior teeth...
  82. doi request reprint Loss of surface enamel after bracket debonding: an in-vivo and ex-vivo evaluation
    Huib Berghauser Pont
    Department of Orthodontics, University Medical Center Groningen, University of Groningen, Groningen, The Netherlands
    Am J Orthod Dentofacial Orthop 138:387.e1-9; discussion 387-9. 2010
    ..The objective of this study was to evaluate the surface enamel after bracket debonding and residual resin removal...
  83. doi request reprint Effect of biofilm on the repair bond strengths of composites
    M Rinastiti
    Department of Biomedical Engineering, University Medical Center Groningen, and University of Groningen, Antonius Deusinglaan 1, 9713 AV Groningen, The Netherlands
    J Dent Res 89:1476-81. 2010
    ..It is concluded that in vitro exposure to oral biofilm is a clinically relevant aging condition, and that silica-coating is to be preferred for the repair of aged composites...
  84. ncbi request reprint Adherence of Candida albicans to denture base acrylics and silicone-based resilient liner materials with different surface finishes
    Erdem U Nevzatoğlu
    Department of Prosthodontics, Faculty of Dentistry, University of Marmara, Buyukciftlik Sok 6, Nisantasi, Istanbul, Turkey
    Clin Oral Investig 11:231-6. 2007
    ..In all types of surface finishes, C. albicans adhesion on denture base acrylics was significantly less (mean ranks 90.18-90.40) than those of silicone liners (mean ranks 119.38-205.18; p < 0.01, Kruskal-Wallis)...
  85. doi request reprint Effect of artificial aging regimens on the performance of self-etching adhesives
    Mustafa Ulker
    Department of Conservative Dentistry, Faculty of Dentistry, Erciyes University, Kayseri, Turkey
    J Biomed Mater Res B Appl Biomater 93:175-84. 2010
    ..Transmission electron microscopy revealed different nanoleakage patterns in the adhesive and hybrid layers of all adhesives examined, and signs of additional silver-filled water channels were more readily detectable after TC/ML...
  86. doi request reprint In-vitro orthodontic bond strength testing: a systematic review and meta-analysis
    Katrina J Finnema
    Department of Orthodontics, University Medical Center Groningen, University of Groningen, Groningen, The Netherlands
    Am J Orthod Dentofacial Orthop 137:615-622.e3. 2010
    ..The aims of this study were to systematically review the available literature regarding in-vitro orthodontic shear bond strength testing and to analyze the influence of test conditions on bond strength...
  87. ncbi request reprint Esthetic rehabilitation of anterior teeth with porcelain laminates and sectional veneers
    Marco Gresnigt
    University Medical Center Groningen, Center For Dentistry and Dental Hygiene, Department of Fixed and Removable Prosthodontics, Groningen, The Netherlands
    J Can Dent Assoc 77:b143. 2011
    ..A step-by-step protocol is proposed for cementation of these delicate restorations, and finishing procedures are described...
  88. ncbi request reprint The effect of glazing on the biaxial flexural strength of different zirconia core materials
    Esra Salihoğlu Yener
    Yeditepe University, Faculty of Dentistry, Department of Prosthetic Dentistry, Istanbul, Turkey
    Acta Odontol Latinoam 24:133-40. 2011
    ..Unglazed ZirkonZahn specimens revealed significantly higher mean flexural strength values than that ofunglazed and glazed zirconia materials tested in this study...
  89. ncbi request reprint Subjective assessment by patients of the efficiency of two denture adhesive pastes
    Yasemin Kulak
    Department of Prosthodontics, University of Marmara, Istanbul, Turkey
    J Prosthodont 14:248-52. 2005
    ..This study evaluated the subjective responses of 30 denture wearers with regard to the effectiveness of two denture adhesive pastes...
  90. ncbi request reprint Effect of physicochemical aging conditions on the composite-composite repair bond strength
    Johannes Brendeke
    University Medical Center Groningen, University of Groningen, Department of Dentistry and Dental Hygiene, Groningen, The Netherlands
    J Adhes Dent 9:399-406. 2007
    ..It was hypothesized that the aging conditions would decrease the repair bond strength and surface conditioning methods would perform similarly for the repair of resin composites...
  91. doi request reprint Candida albicans adherence on silicone elastomers: effect of polymerisation duration and exposure to simulated saliva and nasal secretion
    Huseyin Kurtulmus
    Ege University, Faculty of Dentistry, Department of Prosthodontics, Izmir, Turkey
    Dent Mater 26:76-82. 2010
    ..This study investigated Candida albicans adhesion onto commercial maxillo-facial silicone elastomers based on different polymerisation processes...
  92. ncbi request reprint Evaluation of chlorhexidine gluconate mouthrinse-induced staining using a digital colorimeter: an in vivo study
    Bora Bagis
    Department of Prosthodontics, Faculty of Dentistry, Kardeniz Technical University, Trabzon, Turkey
    Quintessence Int 42:213-23. 2011
    ..To investigate the persistence of staining after the use of chlorhexidine gluconate mouthrinse...
  93. ncbi request reprint Esthetic rehabilitation of worn anterior teeth with thin porcelain laminate veneers
    Marco Gresnigt
    Department of Oral Function, University Medical Center, Groningen, The Netherlands
    Eur J Esthet Dent 6:298-313. 2011
    ..By using the mock-up technique, minimal preparations were made with the outline ending in enamel only. For cementation of these restorations, step-by-step adhesive procedures are presented...
  94. doi request reprint Effect of static and cyclic loading on ceramic laminate veneers adhered to teeth with and without aged composite restorations
    Marco M Gresnigt
    University Medical Center, Groningen, The Netherlands
    J Adhes Dent 13:569-77. 2011
    ..The aim of this study was to evaluate the effect of static and cyclic loading on ceramic laminate veneers adhered to aged resin composite restorations...
  95. doi request reprint General health, dental status and perceived dental treatment needs of an elderly population in Istanbul
    Yasar Ozkan
    Department of Oral and Maxillofacial Surgery, Faculty of Dentistry, Marmara University, Istanbul, Turkey
    Gerodontology 28:28-36. 2011
    ..Comprehensive data on the oral health status and dental treatment needs of the elderly population in Turkey are deficient...
  96. ncbi request reprint A clinical evaluation of ceramic inlays bonded with different luting agents
    D Gemalmaz
    Department of Prosthodontics, Marmara University School of Dentistry, Istanbul, Turkey
    J Adhes Dent 3:273-83. 2001
    ..The purpose of this study was to evaluate the clinical performance of a fired ceramic inlay system bonded with three different luting agents...
  97. doi request reprint Penetration of amalgam constituents into dentine
    Johannes D Scholtanus
    University Medical Center Groningen, Center for Dentistry and Oral Hygiene, University of Groningen, The Netherlands
    J Dent 37:366-73. 2009
    ..This study has been performed to clarify the origin of dark discoloration of dentine by metals from amalgam with special regards to corrosion products...
  98. ncbi request reprint Influence of silane heat treatment on bond strength of resin cement to a feldspathic ceramic
    Rodrigo Furtado de Carvalho
    Federal University of Juiz de Fora, Rua Jose Lourenco Kelme, Campus University, Juiz de Fora, Brazil
    Dent Mater J 30:392-7. 2011
    ..G1 (17.6±2.3 MPa) and G2 (19±3.2 MPa) showed significantly higher mean bond strength than those of G3 (9.1±2.8 MPa) and G4 (10.9±1.8 MPa). SEM analysis showed exclusively mixed failures. Silane HT did not increase the bond strength...
  99. ncbi request reprint Breast reconstruction with the internal mammary artery pedicled fasciocutaneous island flap: description of a new flap
    V Kalender
    Department of Plastic and Reconstructive Surgery, Cardiovascular Research Center, Istanbul University, Faculty of Medicine, Capa, Turkey
    Plast Reconstr Surg 106:1494-8; discussion 1499-500. 2000
    ..In defects of the mammary region that required volume or for which repair by skin grafting was planned, in sternal defects, or in young patients, this flap seems to be the best choice...
  100. ncbi request reprint A case of familial Mediterranean fever with amyloidosis as the first manifestation
    S Kutlay
    Departments of Nephrology, Pathology, and Hematology, Ankara University Medical School, Turkey
    Am J Kidney Dis 38:E34. 2001
    ..We recommend that FMF-Phenotype II and the development of amyloid nephropathy, before or without other symptoms of FMF, should be kept in mind in the face of unexplained proteinuria/amyloidosis, especially in high-risk ethnic groups...
  101. ncbi request reprint Avulsion fractures of both anterior and posterior cruciate ligament tibial insertions
    O U Calpur
    Department of Orthopedic Surgery and Traumatology, Trakya University Medical Faculty, 22030 Edirne, Turkey
    Knee Surg Sports Traumatol Arthrosc 10:223-5. 2002
    ..After 1 year the results were evaluated as very good. Early surgical repair is valuable in these injuries...