Keiichi Yoshida

Summary

Affiliation: Nagasaki University
Country: Japan

Publications

  1. ncbi request reprint Silica coatings formed on noble dental casting alloy by the sol-gel dipping process
    K Yoshida
    Department of Fixed Prosthodontics, Nagasaki University School of Dentistry, Sakamoto, Japan
    J Biomed Mater Res 46:221-7. 1999
  2. ncbi request reprint Bond strength between machinable glass-ceramic and dual-cured resin luting cements using silane coupling agents
    Keiichi Yoshida
    Division of Fixed Prosthodontics and Oral Rehabilitation, Nagasaki University, Graduate School of Biomedical Sciences, 1 7 1, Sakamoto, Nagasaki 852 8588, Japan
    Am J Dent 18:327-30. 2005
  3. ncbi request reprint Bonding of dual-cured resin cement to zirconia ceramic using phosphate acid ester monomer and zirconate coupler
    Keiichi Yoshida
    Division of Fixed Prosthodontics and Oral Rehabilitation, Nagasaki University, Graduate School of Biomedical Sciences, 1 7 1, Sakamoto, Nagasaki 852 8588, Japan
    J Biomed Mater Res B Appl Biomater 77:28-33. 2006
  4. ncbi request reprint Zirconate coupling agent for bonding resin luting cement to pure zirconium
    Keiichi Yoshida
    Division of Prosthodontics and Oral Rehabilitation, Nagasaki University, Graduate School of Biomedical Sciences, 1 7 1 Sakamoto, Nagasaki 852 8588, Japan
    Am J Dent 17:249-52. 2004
  5. ncbi request reprint Flexural fatigue behavior of machinable and light-activated hybrid composites for esthetic restorations
    Keiichi Yoshida
    Department of Fixed Prosthodontics and Oral Rehabilitation, Biomedical Sciences, Nagasaki University Graduate School, Nagasaki, Japan
    J Biomed Mater Res B Appl Biomater 70:218-22. 2004
  6. ncbi request reprint Flexural fatigue strength of CAD/CAM composite material and dual-cured resin luting cements
    Keiichi Yoshida
    Department of Fixed Prosthodontics, Nagasaki University School of Dentistry, 1 7 1, Sakamoto, Nagasaki 852 8588, Japan
    Am J Dent 16:177-80. 2003
  7. ncbi request reprint Effects of filler composition and surface treatment on the characteristics of opaque resin composites
    K Yoshida
    Department of Fixed Prosthodontics, Nagasaki University School of Dentistry, Nagasaki, Japan
    J Biomed Mater Res 58:525-30. 2001
  8. ncbi request reprint Properties of opaque resin composite containing coated and silanized titanium dioxide
    K Yoshida
    Department of Fixed Prosthodontics, Nagasaki University School of Dentistry, Sakamoto, Japan
    J Dent Res 80:864-8. 2001
  9. ncbi request reprint Effect of three adhesive primers for a noble metal on the shear bond strengths of three resin cements
    K Yoshida
    Department of Fixed Prosthodontics, Nagasaki University School of Dentistry, Nagasaki, Japan
    J Oral Rehabil 28:14-9. 2001
  10. ncbi request reprint Effect of three adhesive primers on the bond strengths of four light-activated opaque resins to noble alloy
    K Yoshida
    Department of Fixed Prosthodontics, Nagasaki University School of Dentistry, Nagasaki, Japan
    J Oral Rehabil 28:168-73. 2001

Collaborators

Detail Information

Publications32

  1. ncbi request reprint Silica coatings formed on noble dental casting alloy by the sol-gel dipping process
    K Yoshida
    Department of Fixed Prosthodontics, Nagasaki University School of Dentistry, Sakamoto, Japan
    J Biomed Mater Res 46:221-7. 1999
    ....
  2. ncbi request reprint Bond strength between machinable glass-ceramic and dual-cured resin luting cements using silane coupling agents
    Keiichi Yoshida
    Division of Fixed Prosthodontics and Oral Rehabilitation, Nagasaki University, Graduate School of Biomedical Sciences, 1 7 1, Sakamoto, Nagasaki 852 8588, Japan
    Am J Dent 18:327-30. 2005
    ....
  3. ncbi request reprint Bonding of dual-cured resin cement to zirconia ceramic using phosphate acid ester monomer and zirconate coupler
    Keiichi Yoshida
    Division of Fixed Prosthodontics and Oral Rehabilitation, Nagasaki University, Graduate School of Biomedical Sciences, 1 7 1, Sakamoto, Nagasaki 852 8588, Japan
    J Biomed Mater Res B Appl Biomater 77:28-33. 2006
    ..The application of the mixture of MP and ZC (MP2.0+ZC1.0) was effective for bonding between zirconia ceramic and dual-cured resin luting cement. This primer may be clinically useful as an adhesive primer for zirconia ceramic restoration...
  4. ncbi request reprint Zirconate coupling agent for bonding resin luting cement to pure zirconium
    Keiichi Yoshida
    Division of Prosthodontics and Oral Rehabilitation, Nagasaki University, Graduate School of Biomedical Sciences, 1 7 1 Sakamoto, Nagasaki 852 8588, Japan
    Am J Dent 17:249-52. 2004
    ..To evaluate the shear bond strengths of two dual-cured resin luting cements to pure zirconium and the effect of zirconate coupling agent on the bond strength...
  5. ncbi request reprint Flexural fatigue behavior of machinable and light-activated hybrid composites for esthetic restorations
    Keiichi Yoshida
    Department of Fixed Prosthodontics and Oral Rehabilitation, Biomedical Sciences, Nagasaki University Graduate School, Nagasaki, Japan
    J Biomed Mater Res B Appl Biomater 70:218-22. 2004
    ..A strong correlation was observed between 4-PFS and FFS of the machinable composite and three hybrid resin composites...
  6. ncbi request reprint Flexural fatigue strength of CAD/CAM composite material and dual-cured resin luting cements
    Keiichi Yoshida
    Department of Fixed Prosthodontics, Nagasaki University School of Dentistry, 1 7 1, Sakamoto, Nagasaki 852 8588, Japan
    Am J Dent 16:177-80. 2003
    ..To evaluate the flexural strength and flexural fatigue strength of a CAD/CAM composite and three resin luting cements...
  7. ncbi request reprint Effects of filler composition and surface treatment on the characteristics of opaque resin composites
    K Yoshida
    Department of Fixed Prosthodontics, Nagasaki University School of Dentistry, Nagasaki, Japan
    J Biomed Mater Res 58:525-30. 2001
    ..Surface-treated TiO2(50) and TiO2(40) may be clinically useful as the filler for light-activated opaque dental resin composites...
  8. ncbi request reprint Properties of opaque resin composite containing coated and silanized titanium dioxide
    K Yoshida
    Department of Fixed Prosthodontics, Nagasaki University School of Dentistry, Sakamoto, Japan
    J Dent Res 80:864-8. 2001
    ..Thus, silanized SiO2/Al2O3-coated TiO2 appears to be clinically useful as a filler of opaque resin composites...
  9. ncbi request reprint Effect of three adhesive primers for a noble metal on the shear bond strengths of three resin cements
    K Yoshida
    Department of Fixed Prosthodontics, Nagasaki University School of Dentistry, Nagasaki, Japan
    J Oral Rehabil 28:14-9. 2001
    ....
  10. ncbi request reprint Effect of three adhesive primers on the bond strengths of four light-activated opaque resins to noble alloy
    K Yoshida
    Department of Fixed Prosthodontics, Nagasaki University School of Dentistry, Nagasaki, Japan
    J Oral Rehabil 28:168-73. 2001
    ....
  11. ncbi request reprint Adhesive primers for bonding cobalt-chromium alloy to resin
    K Yoshida
    Nagasaki University School of Dentistry, Japan
    J Oral Rehabil 26:475-8. 1999
    ..This study indicated that COP and MPII are effective primers to obtain higher bond strength between resin and Co-Cr alloy...
  12. ncbi request reprint Antibacterial activity of resin composites with silver-containing materials
    K Yoshida
    Department of Fixed Prosthodontics, Nagasaki University School of Dentistry, Japan
    Eur J Oral Sci 107:290-6. 1999
    ..mutans and favorable mechanical properties...
  13. ncbi request reprint Characterization and inhibitory effect of antibacterial dental resin composites incorporating silver-supported materials
    K Yoshida
    Department of Fixed Prosthodontics, Nagasaki University School of Dentistry, 1 7 1, Sakamoto, Nagasaki 852 8588, Japan
    J Biomed Mater Res 47:516-22. 1999
    ..mutans and its favorable mechanical properties...
  14. ncbi request reprint Effect of MMA-PMMA resin polymerization initiators on the bond strengths of adhesive primers for noble metal
    K Yoshida
    Department of Fixed Prosthodontics, Nagasaki University School of Dentistry, Japan
    Dent Mater 15:332-6. 1999
    ....
  15. ncbi request reprint Properties of fluoride-releasing light-activated resin cement
    K Yoshida
    Department of Fixed Prosthodontics, Nagasaki University School of Dentistry, Japan
    Dent Mater 15:337-41. 1999
    ..The purpose of this study was to investigate the physical properties and the amounts of fluoride released from four types of visible light-activated resin cements...
  16. ncbi request reprint Effects of two silane coupling agents, a bonding agent, and thermal cycling on the bond strength of a CAD/CAM composite material cemented with two resin luting agents
    K Yoshida
    Department of Fixed Prosthodontics, School of Dentistry, Nagasaki University, Nagasaki, Japan
    J Prosthet Dent 85:184-9. 2001
    ..Purpose. This study evaluated the shear bond strengths of 2 dual-cured resin luting agents to a CAD/CAM composite material and the effect of silane coupling agent and bonding resin on the bond strength...
  17. ncbi request reprint Shear bond strength of a new resin bonding system to different ceramic restorations
    Keiichi Yoshida
    Division of Applied Prosthodontics, Nagasaki University, Graduate School of Biomedical Sciences, 1 7 1, Sakamoto, Nagasaki 852 8588, Japan
    Int J Prosthodont 20:417-8. 2007
    ..05). The findings indicate that the resin bonding system may offer an acceptable performance in terms of clinical success for the 5 ceramic restorations...
  18. ncbi request reprint Influence of ceramic thickness on mechanical properties and polymer structure of dual-cured resin luting agents
    Xiangfeng Meng
    Division of Applied Prosthodontics, Nagasaki University, Graduate School of Biomedical Sciences, 1 7 1 Sakamoto, Nagasaki 852 8588, Japan
    Dent Mater 24:594-9. 2008
    ..To investigate the influence of ceramic thickness on the mechanical properties and polymer structure (degree conversion and cross-linking density) of three dual-cured resin luting agents...
  19. ncbi request reprint Effect of four silane coupling agents on bonding of two resin-modified glass ionomer cements to a machinable ceramic
    Kohji Kamada
    Division of Applied Prosthodontics, Nagasaki University Graduate School of Biomedical Sciences, 1 7 1, Sakamoto, Nagasaki 852 8588, Japan
    Dent Mater J 26:240-4. 2007
    ..It was thus recommended that resin-modified glass ionomer cement be applied in conjunction with silane coupling agent when luting ceramic restorations...
  20. ncbi request reprint Effects of alumina-blasting and adhesive primers on bonding between resin luting agent and zirconia ceramics
    Yukiko Tsuo
    Division of Applied Prosthodontics, Nagasaki University, Graduate School of Biomedical Sciences, 1 7 1, Sakamoto, Nagasaki 852 8588, Japan
    Dent Mater J 25:669-74. 2006
    ..05). It was thus concluded that the application of each of the three adhesive primers following alumina-blasting was effective for strong bonding of resin luting agent to zirconia ceramics...
  21. ncbi request reprint The physical properties of a machinable resin composite for esthetic restorations
    Youhei Hamakubo
    Division of Fixed Prosthodontics and Oral Rehabilitation, Graduate School of Biomedical Sciences, Nagasaki University, Japan
    Dent Mater J 24:24-9. 2005
    ..Marginal tipping was also observed in ET and CE. Within the limits of the current study, CO showed physical properties favorable for constructing esthetic restorations...
  22. ncbi request reprint Influence of surface characteristics of four silica-based machinable ceramics on flexural strength and bond strength of a dual-curing resin luting agent
    Keiichi Yoshida
    Division of Applied Prosthodontics, Nagasaki University, Graduate School of Biomedical Sciences, Nagasaki, Japan
    J Adhes Dent 9:407-13. 2007
    ....
  23. doi request reprint Influence of pre-treatments on flexural strength of zirconia and debonding crack-initiation strength of veneered zirconia
    Manabu Doi
    Division of Applied Prosthodontics, Nagasaki University Graduate School of Biomedical Sciences, Nagasaki, Japan
    J Adhes Dent 13:79-84. 2011
    ....
  24. ncbi request reprint Mechanical properties of dual-cured resin luting agents for ceramic restoration
    Keiichi Yoshida
    Nagasaki University Graduate School of Biomedical Sciences Applied Prosthodontics, Nagasaki, Japan
    J Prosthodont 16:370-6. 2007
    ....
  25. ncbi request reprint Shear bond strengths of four resin bonding systems to two silica-based machinable ceramic materials
    Kohji Kamada
    Division of Fixed Prosthodontics and Oral Rehabilitation, Nagasaki University Graduate School of Biomedical Sciences, Japan
    Dent Mater J 25:621-5. 2006
    ..Regarding GNI, CP+LM showed the greatest bond strength after thermocycling among the four bonding systems used. It was concluded that the crystalline phase of the ceramics used might have an effect on bond strength...
  26. ncbi request reprint Post-irradiation hardening of dual-cured and light-cured resin cements through machinable ceramics
    Keiichi Yoshida
    Division of Applied Prosthodontics, Nagasaki University, Graduate School of Biomedical Sciences, Japan
    Am J Dent 19:303-7. 2006
    ..To evaluate the surface hardness (Knoop Hardness Number) of the thin layer in three light-cured and dual-cured resin cements irradiated through or not through 2.0 mm thick machinable ceramics...
  27. pmc Influence of light-exposure methods and depths of cavity on the microhardness of dual-cured core build-up resin composites
    Keiichi Yoshida
    Nagasaki University Hospital, Clinic of Fixed Prosthodontics, Nagasaki, Japan, Clinic of Fixed Prosthodontics, Nagasaki University Hospital, Nagasaki, Japan
    J Appl Oral Sci 22:44-51. 2014
    ..The purpose of this study was to evaluate the Knoop hardness number (KHN) of dual-cured core build-up resin composites (DCBRCs) at 6 depths of cavity after 3 post-irradiation times by 4 light-exposure methods...
  28. ncbi request reprint Influence of light irradiation condition on microshear bond strength of dual-cured resin luting agents
    Xiangfeng Meng
    Division of Applied Prosthodontics, Nagasaki University Graduate School of Biomedical Sciences, 1 7 1, Sakamoto, Nagasaki 852 8588, Japan
    Dent Mater J 26:575-81. 2007
    ..In conclusion, thermal cycling significantly reduced the bond strength for all groups...
  29. ncbi request reprint Hardness development of dual-cured resin cements through different thicknesses of ceramics
    Xiangfeng Meng
    Division of Fixed Prosthodontics and Oral Rehabilitation, Nagasaki University, Graduate School of Biomedical Sciences, Japan
    Dent Mater J 25:132-7. 2006
    ..Variolink II HV and Linkmax HV, on the other hand, seemed to indicate the potential of being compensated by chemical curing to some degree...
  30. ncbi request reprint Microshear bond strength of resin bonding systems to machinable ceramic with different surface treatments
    Xiangfeng Meng
    Department of Prosthodontics, The Stomatological Hospital Affiliated Medical School, Nanjing University, Nanjing, China
    J Adhes Dent 10:189-96. 2008
    ..The bond strength and bond durability of two high-viscosity dual-curing resin luting agents with different surface treatments of ceramic were investigated...
  31. ncbi request reprint Study on the fracture strength of root reconstructed with post and core: alveolar bone resorbed case
    Wataru Komada
    Fixed Prosthodontics, Department of Restorative Science, Graduate School, Tokyo Medical and Dental University, Japan
    Dent Mater J 25:177-82. 2006
    ..4 N). However, in the resorbed bone model, there were no significant differences in fracture resistance between cast post and core and fiber post with composite resin...
  32. ncbi request reprint A clinical evaluation of the agar alginate combined impression: dimensional accuracy of dies by new master crown technique
    Priyadarshanee Manorika Ratnaweera
    Fixed Prosthodontics, Department of Restorative Sciences, Division of Oral Health Sciences, Graduate School, Tokyo Medical and Dental University, Japan
    J Med Dent Sci 50:231-8. 2003
    ..To evaluate the dimensional accuracy of several impression methods including agar alginate combined impression in vivo; the marginal accuracy of stone dies was determined using a new electroformed master crown technique...