Akihiko Kadokawa

Summary

Affiliation: Kagoshima University
Country: Japan

Publications

  1. doi request reprint A comparison of stress relaxation in temporary and permanent luting cements
    Takahito Kanie
    Department of Biomaterials Science, Graduate School of Medical and Dental Sciences, Kagoshima University, 8 35 1 Sakuragaoka, Kagoshima, Japan
    J Prosthodont Res 57:46-50. 2013
  2. ncbi request reprint Deformation and flexural properties of denture base polymer reinforced with glass fiber sheet
    Takahito Kanie
    Department of Biomaterials Science, Graduate School of Medical and Dental Sciences, Kagoshima University, 8 35 1 Sakuragaoka, Kagoshima 890 8544, Japan
    Dent Mater J 24:297-303. 2005
  3. ncbi request reprint Mechanical properties of an experimental soft lining material based on urethane oligomer
    Takahito Kanie
    Department of Biomaterials Science, Graduate School of Medical and Dental Sciences, Kagoshima University, 8 35 1 Sakuragaoka, Kagoshima 890 8544, Japan
    Dent Mater J 24:433-9. 2005
  4. ncbi request reprint Mechanical properties of woven glass fiber-reinforced composites
    Takahito Kanie
    Department of Biomaterials Science, Graduate School of Medical and Dental Sciences, Kagoshima University, 8 35 1 Sakuragaoka, Kagoshima 890 8544, Japan
    Dent Mater J 25:377-81. 2006
  5. ncbi request reprint Effects of adding methacrylate monomers on viscosity and mechanical properties of experimental light-curing soft lining materials based on urethane (meth)acrylate oligomers
    Takahito Kanie
    Department of Biomaterials Science, Graduate School of Medical and Dental Sciences, Kagoshima University, 8 35 1 Sakuragaoka, Kagoshima 890 8544, Japan
    Dent Mater J 27:856-61. 2008
  6. ncbi request reprint Mechanical properties and cytotoxicity of experimental soft lining materials based on urethane acrylate oligomers
    Takahito Kanie
    Department of Biomaterials Science, Graduate School of Medical and Dental Sciences, Kagoshima University, Kagoshima, Japan
    Dent Mater J 28:501-6. 2009
  7. ncbi request reprint Flexural properties of ethyl or methyl methacrylate-UDMA blend polymers
    Takahito Kanie
    Department of Biomaterials Science, Graduate School of Medical and Dental Sciences, Kagoshima University, 8 35 1 Sakuragaoka, Kagoshima 890 8544, Japan
    Dent Mater J 29:575-81. 2010
  8. ncbi request reprint Bonding strength and durability of alkaline-treated titanium to veneering resin
    Seiji Ban
    Department of Biomaterials Science, Kagoshima University Graduate School of Medical and Dental Sciences, Japan
    Dent Mater J 23:424-8. 2004
  9. ncbi request reprint Wear evaluation of porcelain opposing gold, composite resin, and enamel
    Akihiko Kadokawa
    Fixed Prosthetic Dentistry, Kagoshima University Graduate School of Medical and Dental Sciences, Japan
    J Prosthet Dent 96:258-65. 2006

Collaborators

Detail Information

Publications9

  1. doi request reprint A comparison of stress relaxation in temporary and permanent luting cements
    Takahito Kanie
    Department of Biomaterials Science, Graduate School of Medical and Dental Sciences, Kagoshima University, 8 35 1 Sakuragaoka, Kagoshima, Japan
    J Prosthodont Res 57:46-50. 2013
    ..The stress relaxation and compressive strength of resin, resin-modified glass ionomer, glass ionomer, polycarboxylate, and zinc oxide eugenol cements were measured to determine the characteristics of these materials after setting...
  2. ncbi request reprint Deformation and flexural properties of denture base polymer reinforced with glass fiber sheet
    Takahito Kanie
    Department of Biomaterials Science, Graduate School of Medical and Dental Sciences, Kagoshima University, 8 35 1 Sakuragaoka, Kagoshima 890 8544, Japan
    Dent Mater J 24:297-303. 2005
    ..Flexural strength was significantly increased by the reinforcement (p < 0.05). The flexural moduli of 3.0-mm thick R, GO, and GR were significantly smaller than that of 1.5-mm thick specimens...
  3. ncbi request reprint Mechanical properties of an experimental soft lining material based on urethane oligomer
    Takahito Kanie
    Department of Biomaterials Science, Graduate School of Medical and Dental Sciences, Kagoshima University, 8 35 1 Sakuragaoka, Kagoshima 890 8544, Japan
    Dent Mater J 24:433-9. 2005
    ..Based on the results of this study, it seemed like the SLMs possess many suitable properties for use with a new technique that we recently developed for preparing denture base resin and soft lining material...
  4. ncbi request reprint Mechanical properties of woven glass fiber-reinforced composites
    Takahito Kanie
    Department of Biomaterials Science, Graduate School of Medical and Dental Sciences, Kagoshima University, 8 35 1 Sakuragaoka, Kagoshima 890 8544, Japan
    Dent Mater J 25:377-81. 2006
    ..05). In terms of comparison between the two specimen diameters, no statistically significant differences in flexural strength and compressive strength (p > 0.05) were observed...
  5. ncbi request reprint Effects of adding methacrylate monomers on viscosity and mechanical properties of experimental light-curing soft lining materials based on urethane (meth)acrylate oligomers
    Takahito Kanie
    Department of Biomaterials Science, Graduate School of Medical and Dental Sciences, Kagoshima University, 8 35 1 Sakuragaoka, Kagoshima 890 8544, Japan
    Dent Mater J 27:856-61. 2008
    ..Based on these results, it appears that the addition of ethyl- or butyl-methacrylate monomers is useful for decreasing the viscosity of experimental light-curing soft lining materials without changing their mechanical properties...
  6. ncbi request reprint Mechanical properties and cytotoxicity of experimental soft lining materials based on urethane acrylate oligomers
    Takahito Kanie
    Department of Biomaterials Science, Graduate School of Medical and Dental Sciences, Kagoshima University, Kagoshima, Japan
    Dent Mater J 28:501-6. 2009
    ..Cytotoxicity was measured by a MTT-based assay using HeLa S3 and Ca9-22 cells. UV-3200B and UV-3700B oligomers and all four polymerized ESLMs showed cell viability over 95.2% (p < 0.05)...
  7. ncbi request reprint Flexural properties of ethyl or methyl methacrylate-UDMA blend polymers
    Takahito Kanie
    Department of Biomaterials Science, Graduate School of Medical and Dental Sciences, Kagoshima University, 8 35 1 Sakuragaoka, Kagoshima 890 8544, Japan
    Dent Mater J 29:575-81. 2010
    ..01). Within limitation of this investigation, methyl methacrylate-UDMA blend polymer of this composition is available for denture base resin...
  8. ncbi request reprint Bonding strength and durability of alkaline-treated titanium to veneering resin
    Seiji Ban
    Department of Biomaterials Science, Kagoshima University Graduate School of Medical and Dental Sciences, Japan
    Dent Mater J 23:424-8. 2004
    ....
  9. ncbi request reprint Wear evaluation of porcelain opposing gold, composite resin, and enamel
    Akihiko Kadokawa
    Fixed Prosthetic Dentistry, Kagoshima University Graduate School of Medical and Dental Sciences, Japan
    J Prosthet Dent 96:258-65. 2006
    ..However, there is limited information on comparison of mutual wear rates when these materials oppose in 2-body and 3-body conditions...