Seiji Ban

Summary

Affiliation: Kagoshima University
Country: Japan

Publications

  1. ncbi request reprint Surface modification of titanium by etching in concentrated sulfuric acid
    Seiji Ban
    Department of Biomaterials Science, Graduate School of Medical and Dental Sciences, Kagoshima University, Kagoshima, Japan
    Dent Mater 22:1115-20. 2006
  2. ncbi request reprint Effect of alkaline treatment of pure titanium and its alloys on the bonding strength of dental veneering resins
    Seiji Ban
    Division of Biomaterials Science, Kagoshima University Graduate School of Medical and Dental Sciences, Kagoshima, Japan
    J Biomed Mater Res A 66:138-45. 2003
  3. doi request reprint Biaxial flexure strength and low temperature degradation of Ce-TZP/Al2O3 nanocomposite and Y-TZP as dental restoratives
    Seiji Ban
    Department of Biomaterials Science, Graduate School of Medical and Dental Sciences, Kagoshima University, Kagoshima 890 0145, Japan
    J Biomed Mater Res B Appl Biomater 87:492-8. 2008
  4. ncbi request reprint Acid etching of titanium for bonding with veneering composite resins
    Seiji Ban
    Department of Biomaterials Science, Graduate School of Medical and Dental Sciences, Kagoshima University, 8 35 1, Sakuragaoka, Kagoshima 890 8544 Kagoshima, Japan
    Dent Mater J 25:382-90. 2006
  5. ncbi request reprint Bonding strength and durability of alkaline-treated titanium to veneering resin
    Seiji Ban
    Department of Biomaterials Science, Kagoshima University Graduate School of Medical and Dental Sciences, Japan
    Dent Mater J 23:424-8. 2004
  6. ncbi request reprint Mechanical properties of an experimental soft lining material based on urethane oligomer
    Takahito Kanie
    Department of Biomaterials Science, Graduate School of Medical and Dental Sciences, Kagoshima University, 8 35 1 Sakuragaoka, Kagoshima 890 8544, Japan
    Dent Mater J 24:433-9. 2005
  7. ncbi request reprint Flexural properties of ethyl or methyl methacrylate-UDMA blend polymers
    Takahito Kanie
    Department of Biomaterials Science, Graduate School of Medical and Dental Sciences, Kagoshima University, 8 35 1 Sakuragaoka, Kagoshima 890 8544, Japan
    Dent Mater J 29:575-81. 2010
  8. ncbi request reprint Deformation and flexural properties of denture base polymer reinforced with glass fiber sheet
    Takahito Kanie
    Department of Biomaterials Science, Graduate School of Medical and Dental Sciences, Kagoshima University, 8 35 1 Sakuragaoka, Kagoshima 890 8544, Japan
    Dent Mater J 24:297-303. 2005
  9. ncbi request reprint Mechanical properties and bond strength of silicone-based resilient denture liners
    Koichi Fujii
    Department of Biomaterials Science, Graduate School of Medical and Dental Sciences, Kagoshima University, Japan
    Dent Mater J 24:667-75. 2005
  10. ncbi request reprint Flexural properties of denture base polymers reinforced with a glass cloth-urethane polymer composite
    Takahito Kanie
    Department of Biomaterials Science, Kagoshima University Graduate School of Medical and Dental Sciences, Sakuragaoka, Kagoshima 890 8544, Japan
    Dent Mater 20:709-16. 2004

Collaborators

Detail Information

Publications44

  1. ncbi request reprint Surface modification of titanium by etching in concentrated sulfuric acid
    Seiji Ban
    Department of Biomaterials Science, Graduate School of Medical and Dental Sciences, Kagoshima University, Kagoshima, Japan
    Dent Mater 22:1115-20. 2006
    ..The purpose of this study was to characterize the etching behavior of titanium in concentrated sulfuric acid and discuss its application on surface modification of titanium for biological use...
  2. ncbi request reprint Effect of alkaline treatment of pure titanium and its alloys on the bonding strength of dental veneering resins
    Seiji Ban
    Division of Biomaterials Science, Kagoshima University Graduate School of Medical and Dental Sciences, Kagoshima, Japan
    J Biomed Mater Res A 66:138-45. 2003
    ..01). In conclusion, alkaline treatment is a simple, effective surface modification of titanium that improves bonding to veneering resin...
  3. doi request reprint Biaxial flexure strength and low temperature degradation of Ce-TZP/Al2O3 nanocomposite and Y-TZP as dental restoratives
    Seiji Ban
    Department of Biomaterials Science, Graduate School of Medical and Dental Sciences, Kagoshima University, Kagoshima 890 0145, Japan
    J Biomed Mater Res B Appl Biomater 87:492-8. 2008
    ..This study indicates that the Ce-TZP/Al(2)O(3) nanocomposite demonstrates excellent mechanical durability for dental restorations such as all-ceramic bridges...
  4. ncbi request reprint Acid etching of titanium for bonding with veneering composite resins
    Seiji Ban
    Department of Biomaterials Science, Graduate School of Medical and Dental Sciences, Kagoshima University, 8 35 1, Sakuragaoka, Kagoshima 890 8544 Kagoshima, Japan
    Dent Mater J 25:382-90. 2006
    ..We therefore concluded that acid etching in concentrated H2SO4 is a simple and effective surface modification method of titanium for bonding to veneering composite resins...
  5. ncbi request reprint Bonding strength and durability of alkaline-treated titanium to veneering resin
    Seiji Ban
    Department of Biomaterials Science, Kagoshima University Graduate School of Medical and Dental Sciences, Japan
    Dent Mater J 23:424-8. 2004
    ....
  6. ncbi request reprint Mechanical properties of an experimental soft lining material based on urethane oligomer
    Takahito Kanie
    Department of Biomaterials Science, Graduate School of Medical and Dental Sciences, Kagoshima University, 8 35 1 Sakuragaoka, Kagoshima 890 8544, Japan
    Dent Mater J 24:433-9. 2005
    ..Based on the results of this study, it seemed like the SLMs possess many suitable properties for use with a new technique that we recently developed for preparing denture base resin and soft lining material...
  7. ncbi request reprint Flexural properties of ethyl or methyl methacrylate-UDMA blend polymers
    Takahito Kanie
    Department of Biomaterials Science, Graduate School of Medical and Dental Sciences, Kagoshima University, 8 35 1 Sakuragaoka, Kagoshima 890 8544, Japan
    Dent Mater J 29:575-81. 2010
    ..01). Within limitation of this investigation, methyl methacrylate-UDMA blend polymer of this composition is available for denture base resin...
  8. ncbi request reprint Deformation and flexural properties of denture base polymer reinforced with glass fiber sheet
    Takahito Kanie
    Department of Biomaterials Science, Graduate School of Medical and Dental Sciences, Kagoshima University, 8 35 1 Sakuragaoka, Kagoshima 890 8544, Japan
    Dent Mater J 24:297-303. 2005
    ..Flexural strength was significantly increased by the reinforcement (p < 0.05). The flexural moduli of 3.0-mm thick R, GO, and GR were significantly smaller than that of 1.5-mm thick specimens...
  9. ncbi request reprint Mechanical properties and bond strength of silicone-based resilient denture liners
    Koichi Fujii
    Department of Biomaterials Science, Graduate School of Medical and Dental Sciences, Kagoshima University, Japan
    Dent Mater J 24:667-75. 2005
    ..However, some materials exhibited inadequate durability for clinical service, because hardness increased during storage and/or bond strength decreased after thermal cycling...
  10. ncbi request reprint Flexural properties of denture base polymers reinforced with a glass cloth-urethane polymer composite
    Takahito Kanie
    Department of Biomaterials Science, Kagoshima University Graduate School of Medical and Dental Sciences, Sakuragaoka, Kagoshima 890 8544, Japan
    Dent Mater 20:709-16. 2004
    ..This is produced for incorporation into the outermost position under the greatest tension in denture base resins. In this study, the flexural properties of self-, heat-, and light-curing reinforced resins were determined...
  11. ncbi request reprint Optical and color stabilities of paint-on resins for shade modification of restorative resins
    Hiroyuki Arikawa
    Department of Biomaterials Science, Field of Oral and Maxillofacial Rehabilitation, Kagoshima University Graduate School of Medical and Dental Sciences, Sakuragaoka, Kagoshima, Japan
    Dent Mater J 23:155-60. 2004
    ..Our results indicate that the paint-on resins exhibit stable optical properties and color appearance, which are at least as good as the crown and bridge resins...
  12. ncbi request reprint Effects of adding methacrylate monomers on viscosity and mechanical properties of experimental light-curing soft lining materials based on urethane (meth)acrylate oligomers
    Takahito Kanie
    Department of Biomaterials Science, Graduate School of Medical and Dental Sciences, Kagoshima University, 8 35 1 Sakuragaoka, Kagoshima 890 8544, Japan
    Dent Mater J 27:856-61. 2008
    ..Based on these results, it appears that the addition of ethyl- or butyl-methacrylate monomers is useful for decreasing the viscosity of experimental light-curing soft lining materials without changing their mechanical properties...
  13. ncbi request reprint Light-curing reinforcement for denture base resin using a glass fiber cloth pre-impregnated with various urethane oligomers
    Takahito Kanie
    Department of Biomaterials Science, Kagoshima University Graduate School of Medical and Dental Sciences, Japan
    Dent Mater J 23:291-6. 2004
    ..When reinforced with the other four oligomers (S5, S3, U4, and U6), the flexural strength and flexural modulus of the self-, heat-, and light-cured resins increased significantly (p<0.01)...
  14. ncbi request reprint Optical properties of paint-on resins for shade modification of crown and bridge resins--light transmittance characteristics--
    Hiroyuki Arikawa
    Department of Biomaterials Science, Field of Oral and Maxillofacial Rehabilitation, Course for Developmental Therapeutics, Kagoshima University Graduate School of Medical and Dental Sciences 8 35 1 Sakuragaoka, Kagoshima 890 8544, Japan
    Dent Mater J 22:272-9. 2003
    ..The thin layer of paint-on resin effectively changed the color of restorative resin. The paint-on resin may be an effective material for the modification of the color appearance matching required...
  15. ncbi request reprint Cellular compatibility of a gamma-irradiated modified siloxane-poly(lactic acid)-calcium carbonate hybrid membrane for guided bone regeneration
    Naoshi Takeuchi
    Department of Periodontology, Graduate School of Medical and Dental Sciences, Kagoshima University, 8 35 1 Sakuragaoka, Kagoshima 890 8544, Japan
    Dent Mater J 30:730-8. 2011
    ..These results suggest that the gamma-irradiated Si-PVH/PLA membrane is biocompatible with both fibroblasts and osteoblasts, and may have an application for GBR...
  16. ncbi request reprint Effect of surface roughness on initial responses of osteoblast-like cells on two types of zirconia
    Daisuke Yamashita
    Department of Periodontology, Graduate School of Medical and Dental Sciences, Kagoshima University, Kagoshima, Japan
    Dent Mater J 28:461-70. 2009
    ..NANOZR and 3Y-TZP produced good cell attachment, similar to Ti and AO. The overall results demonstrated that NANOZR and 3Y-TZP with rough surface could provide good initial cell responses, adequate for future implant usage...
  17. ncbi request reprint Surface properties and biocompatibility of acid-etched titanium
    Yukari Iwaya
    Department of Periodontology, Kagoshima University Graduate School of Medical and Dental Sciences, 8 35 1, Sakuragaoka, Kagoshima 890 8544, Japan
    Dent Mater J 27:415-21. 2008
    ..Based on the results of this study, it was concluded that etching with concentrated sulfuric acid was a simple and effective way to roughen the surface of titanium without compromising its biocompatibility...
  18. ncbi request reprint Mechanical properties and cytotoxicity of experimental soft lining materials based on urethane acrylate oligomers
    Takahito Kanie
    Department of Biomaterials Science, Graduate School of Medical and Dental Sciences, Kagoshima University, Kagoshima, Japan
    Dent Mater J 28:501-6. 2009
    ..Cytotoxicity was measured by a MTT-based assay using HeLa S3 and Ca9-22 cells. UV-3200B and UV-3700B oligomers and all four polymerized ESLMs showed cell viability over 95.2% (p < 0.05)...
  19. ncbi request reprint Adhesive strength of paint-on resins to crown and bridge composites
    Takahito Kanie
    Department of Biomaterials Science, Field of Oral and Maxillofacial Rehabilitation, Kagoshima University Graduate School of Medical and Dental Sciences, Kagoshima 890 8544, Japan
    Dent Mater J 23:441-6. 2004
    ..05). The adhesive strengths to composites with sandblasting showed higher values than those without it (p < 0.01)...
  20. ncbi request reprint Toothbrush abrasion of paint-on resins for shade modification and crown resins: effect of water absorption
    Koichi Fujii
    Department of Biomaterials Science, Field of Oral and Maxillofacial Rehabilitation, Kagoshima University Graduate School of Medical and Dental Sciences, Sakuragaoka, Kagoshima, Japan
    Dent Mater J 23:223-9. 2004
    ..These results indicated that the abrasion resistance of paint-on resins was located in the middle among all materials examined...
  21. ncbi request reprint Effect of filler properties in composite resins on light transmittance characteristics and color
    Hiroyuki Arikawa
    Department of Biomaterials Science, Graduate School of Medical and Dental Sciences, Kagoshima University, 8 35 1 Sakuragaoka, Kagoshima 890 8544, Japan
    Dent Mater J 26:38-44. 2007
    ....
  22. ncbi request reprint A method for improving the light intensity distribution in dental light-curing units
    Hiroyuki Arikawa
    Department of Biomaterials Science, Graduate School of Medical and Dental Sciences, Kagoshima University, 8 35 1 Sakuragaoka, Kagoshima 890 8544, Japan
    Dent Mater J 30:151-7. 2011
    ..Our results indicate that the addition of optical elements to the LCU may be a simple and effective method for reducing inhomogeneity in radiation light from the LCUs...
  23. ncbi request reprint Light-attenuating effect of dentin on the polymerization of light-activated restorative resins
    Hiroyuki Arikawa
    Department of Biomaterials Science, Field of Oral and Maxillofacial Rehabilitation, Developmental Kagoshima University Graduate School of Medical and Dental Sciences, Kagoshima 890 8544, Japan
    Dent Mater J 23:467-73. 2004
    ..Recovery from mechanical properties' reduction was achieved when materials were irradiated 1.5-4 times longer than the standard irradiation time...
  24. ncbi request reprint Effect of inhomogeneity of light from light curing units on the surface hardness of composite resin
    Hiroyuki Arikawa
    Department of Biomaterials Science, Graduate School of Medical and Dental Sciences, Kagoshima University, 8 35 1 Sakuragaoka, Kagoshima 890 0075, Japan
    Dent Mater J 27:21-8. 2008
    ..Our results indicated that markedly inhomogeneous light emitted from light curing unit could result in inhomogeneous polymerization in some areas of the restoration below the light guide tip...
  25. ncbi request reprint Mechanical properties of woven glass fiber-reinforced composites
    Takahito Kanie
    Department of Biomaterials Science, Graduate School of Medical and Dental Sciences, Kagoshima University, 8 35 1 Sakuragaoka, Kagoshima 890 8544, Japan
    Dent Mater J 25:377-81. 2006
    ..05). In terms of comparison between the two specimen diameters, no statistically significant differences in flexural strength and compressive strength (p > 0.05) were observed...
  26. ncbi request reprint Bactericidal efficacy of glycine-type amphoteric surfactant as a denture cleaner and its influence on properties of denture base resins
    Makiko Hashiguchi
    Department of Prosthodontics, Graduate School of Medical and Dental Sciences, Kagoshima University, 8 35 1 Sakuragaoka, Kagoshima 890 8544
    Dent Mater J 28:307-14. 2009
    ..05). These results suggested that glycine-type amphoteric surfactant solution may be effective as a denture cleaner in conjunction with an ultrasonic cleaning device...
  27. ncbi request reprint Light transmittance characteristics and refractive indices of light-activated pit and fissure sealants
    Hiroyuki Arikawa
    Department of Biomaterials Science, Graduate School of Medical and Dental Sciences, Kagoshima University, Kagoshima, Japan
    Dent Mater J 29:89-96. 2010
    ..Significant differences in light transmittance characteristics and refractive indices between the materials and enamel may affect color matching between them...
  28. ncbi request reprint Mechanical properties of dental zirconia ceramics changed with sandblasting and heat treatment
    Hideo Sato
    Department of Biomaterials Science, Graduate School of Medical and Dental Sciences, Kagoshima University, 8 35 1 Sakuragaoka, Kagoshima 890 8544, Japan
    Dent Mater J 27:408-14. 2008
    ..With the occurrence of such a strengthening mechanism in the microstructure, it was concluded that CZA was more susceptible to stress-induced transformation than Y-TZP...
  29. ncbi request reprint Color change in acrylic denture base resin reinforced with wire mesh and glass cloth
    Takahito Kanie
    Department of Biomaterials Science, Field of Oral and Maxillofacial Rehabilitation, Course for Advanced Therapeutics, Kagoshima University Graduate School of Medical and Dental Sciences, 8 35 1 Sakuragaoka, Kagoshima 890 8544, Japan
    Dent Mater J 22:425-35. 2003
    ....
  30. ncbi request reprint Surface damages of zirconia by Nd:YAG dental laser irradiation
    Makoto Noda
    Department of Biomaterials Science, Graduate School of Medical and Dental Sciences, Kagoshima University, 8 35 1 Sakuragaoka, Kagoshima 890 8544, Japan
    Dent Mater J 29:536-41. 2010
    ..Consequently, these phenomena reduced the mechanical strength of zirconia. Therefore, Nd:YAG dental laser welding should not be performed on tetragonal zirconia...
  31. ncbi request reprint Bioactive apatite coating on titanium using an alternate soaking process
    Hiroshi Kono
    Department of Biomaterials Science, Graduate School of Medical and Dental Sciences, Kagoshima University, 8 35 1 Sakuragaoka, Kagoshima 890 0145, Japan
    Dent Mater J 26:186-93. 2007
    ..Further, apatite coating using alternate soaking on a 200-grid titanium mesh confirmed that this coating method was applicable for substrates with complicated shapes...
  32. ncbi request reprint Comparison of the mechanical properties of 2 prosthetic mini-implants
    Takahito Kanie
    Department of Biomaterials Science, Kagoshima University Graduate School of Medical and Dental Sciences, Kagoshima 890 8544, Japan
    Implant Dent 13:251-6. 2004
    ..MTI is easy to remove and wrought in clinical use, and MDI is excellent in flexural properties compared with MTI. (Implant Dent 2004;13:251-256)..
  33. ncbi request reprint Mechanical properties of reinforced denture base resin: the effect of position and the number of woven glass fibers
    Takahito Kanie
    Department of Biomaterials Science, Kagoshima University Dental School 8 35 1 Sakuragaoka, Kagoshima 890 8544, Japan
    Dent Mater J 21:261-9. 2002
    ..Furthermore, the denture base resin reinforced with woven glass fiber was made tougher by increasing the number of woven glass fibers incorporated into the portion under tension...
  34. ncbi request reprint Effect of radiation light characteristics on surface hardness of paint-on resin for shade modification
    Hiroyuki Arikawa
    Department of Biomaterials Science, Graduate School of Medical and Dental Sciences, Kagoshima University, Japan
    Dent Mater J 24:636-41. 2005
    ..Our results indicated that the polymerization efficiency of paint-on resin was significantly influenced by the radiation light characteristics of clinical light-curing units...
  35. ncbi request reprint Impact strength of acrylic denture base resin reinforced with woven glass fiber
    Takahito Kanie
    Department of Biomaterials Science, Kagoshima University Dental School, 8 35 1 Sakuragaoka, Kagoshima 890 8544, Japan
    Dent Mater J 22:30-8. 2003
    ..The results suggest that woven glass fiber is an effective reinforcement in denture base resin...
  36. ncbi request reprint Radio-opacity of core materials for all-ceramic restorations
    Yuji Okuda
    Department of Biomaterials Science, Graduate School of Medical and Dental Sciences, Kagoshima University, Kagoshima 890 8544, Japan
    Dent Mater J 29:35-40. 2010
    ..This was because NANOZR contained 30 vol% of alumina and its density was also slightly lower than that of Y-TZP...
  37. ncbi request reprint Tooth brush abrasion of paint-on resins for shade modification of crown and bridge resins
    Koichi Fujii
    Department of Biomaterials Science, Field of Oral and Maxillofacial Rehabilitation, Course for Advanced Therapeutics, Kagoshima University Graduate School of Medical and Dental Sciences, 8 35 1 Sakuragaoka, Kagoshima 890 8544, Japan
    Dent Mater J 22:244-50. 2003
    ..Wear depth was 19.9-49.4% lower than for the crown and bridge resin. These results suggest that the paint-on resins are expected to have adequate resistance to toothbrush abrasion and may therefore be suitable for clinical use...
  38. ncbi request reprint Setting characteristics of silicone-based resilient denture liners
    Koichi Fujii
    Department of Biomaterials Science, Field of Oral and Maxillofacial Rehabilitation, Kagoshima University Graduate School of Medical and Dental Science, Kagoshima 890 8544, Japan
    Dent Mater J 23:566-71. 2004
    ....
  39. ncbi request reprint Effect of various visible light photoinitiators on the polymerization and color of light-activated resins
    Hiroyuki Arikawa
    Department of Biomaterials Science, Graduate School of Medical and Dental Sciences, Kagoshima University
    Dent Mater J 28:454-60. 2009
    ..Our results indicate that the TPO photoinitiator and the violet-LED light unit may provide a useful and improved photopolymerization system for dental light-activated resins...
  40. ncbi request reprint Biocompatibility of apatite-coated titanium mesh prepared by hydrothermal-electrochemical method
    Akihiko Yuda
    Department of Periodontology, Kagoshima University Graduate School of Medical and Dental Sciences, Japan
    Dent Mater J 24:588-95. 2005
    ..These results suggested that the apatite-coated titanium mesh prepared by hydrothermal-electrochemical method has excellent biocompatibility...
  41. ncbi request reprint Real-time monitoring of apatite deposition using electrochemical quartz crystal microbalance
    Seiji Ban
    Department of Biomaterials Science, Field of Oral and Maxillofacial Rehabilitation, Course for Advanced Therapeutics, Kagoshima University Graduate School of Medical and Dental Sciences, 8 35 1, Sakuragaoka, Kagoshima 890 8544, Japan
    Dent Mater J 22:467-74. 2003
    ..0 and 2.0 mA/cm2 were about 36.1 and 31.9 kJ/mol, respectively. These results indicate that electro current loading may reduce the activation energy required for the deposition of calcium phosphates...
  42. ncbi request reprint Calcium-ion incorporation into titanium surfaces accompanied by electrochemical apatite-deposition
    Seiji Ban
    Department of Biomaterials Science, Kagoshima University Dental School, 8 35 1, Sakuragaoka, Kagoshima 890 8544, Japan
    Dent Mater J 21:306-13. 2002
    ..These results suggested that Ca ions were well incorporated into the outermost oxide layer of titanium accompanied by the electrochemical apatite-deposition on its surface...
  43. ncbi request reprint Morphological regulation and crystal growth of hydrothermal-electrochemically deposited apatite
    Seiji Ban
    Department of Biomaterials Science, Kagoshima University Dental School, Japan
    Biomaterials 23:2965-72. 2002
    ..These results revealed that hydrothermal-electrochemical deposition of apatite consists of two processes: nucleation and crystal growth, which strongly depend on the electrolyte temperature and current density...
  44. ncbi request reprint Biocompatibility of composite membrane consisting of oriented needle-like apatite and biodegradable copolymer with soft and hard tissues in rats
    Taizo Watanabe
    Department of Endodontics, School of Dentistry, Aichi Gakuin University, 2 11, Suemori Dori, Chikusa ku, Nagoya 464 8651, Japan
    Dent Mater J 23:609-12. 2004
    ..These results suggested that the biodegradable composite membrane containing oriented needle-like apatite had excellent biocompatibility with both soft and hard tissues...