Carlos Nelson Elias

Summary

Country: Brazil

Publications

  1. doi request reprint Improving osseointegration of dental implants
    Carlos Nelson Elias
    Instituto Militar de Engenharia, Biomaterials Laboratory, Pr Gen Tiburcio 80, 22290 270 Rio de Janeiro, RJ, Brazil
    Expert Rev Med Devices 7:241-56. 2010
  2. doi request reprint Mechanical properties, surface morphology and stability of a modified commercially pure high strength titanium alloy for dental implants
    Carlos Nelson Elias
    Biomaterials Laboratory, Instituto Militar de Engenharia, Brazil Electronic address
    Dent Mater 31:e1-e13. 2015
  3. pmc Preparation of Bioactive Titanium Surfaces via Fluoride and Fibronectin Retention
    Carlos Nelson Elias
    Biomaterials Laboratory, Instituto Militar de Engenharia, Pr Gen Tiburcio 80, 22290 270 Rio de Janeiro, RJ, Brazil
    Int J Biomater 2012:290179. 2012
  4. pmc Orthodontic implants: concepts for the orthodontic practitioner
    Carlos Nelson Elias
    Biomaterials Laboratory, Military Institute of Engineering, 22290 270 Rio de Janeiro, RJ, Brazil
    Int J Dent 2012:549761. 2012
  5. doi request reprint Influence of implant shape, surface morphology, surgical technique and bone quality on the primary stability of dental implants
    Carlos Nelson Elias
    Biomaterials Laboratory, Instituto Militar de Engenharia, Rio de Janeiro, RJ, Brazil
    J Mech Behav Biomed Mater 16:169-80. 2012
  6. doi request reprint Relationship between surface properties (roughness, wettability and morphology) of titanium and dental implant removal torque
    Carlos Nelson Elias
    Biomaterials Laboratory, Instituto Militar de Engenharia, Pr Gen Tiburcio 80, 22290 270 Rio de Janeiro, RJ, Brazil
    J Mech Behav Biomed Mater 1:234-42. 2008
  7. ncbi request reprint Force-deflection properties of initial orthodontic archwires
    Catia Cardoso Abdo Quintão
    Department of Orthodontics, State University of Rio de Janeiro, Rio de Janeiro, Brazil
    World J Orthod 10:29-32. 2009
  8. doi request reprint Sequential bone healing of immediately loaded mini-implants
    Glaucio Serra
    University of California at San Diego Engineering Military Institute, Rio de Janeiro, Brazil
    Am J Orthod Dentofacial Orthop 134:44-52. 2008
  9. doi request reprint The effects of superficial roughness and design on the primary stability of dental implants
    Mychelle Vianna Dos Santos
    Biomaterials Laboratory, Instituto Militar de Engenharia, Rio de Janeiro, RJ, Brazil
    Clin Implant Dent Relat Res 13:215-23. 2011
  10. doi request reprint Influence of thermal or chemical degradation on the frictional force of an experimental coated NiTi wire
    Ana Maria Bezerra Bandeira
    Program of Metallurgical and Materials Engineering, COPPE, Federal University of Rio de Janeiro, Rio de Janeiro, Brazil
    Angle Orthod 81:484-9. 2011

Collaborators

  • Glaucio Serra
  • Clarice Nishio
  • Antônio Carlos Ruellas
  • Mariana Marquezan
  • Ruslan Valiev
  • Luiz Meirelles
  • Hélio Pereira Lopes
  • Eduardo Franzotti Sant'anna
  • Lara Carvalho Freitas Sigilião
  • Giselle Naback Lemes Vilani
  • Alline Birra Nolasco Fernandes
  • Claudia Trindade Mattos
  • Dayanne Lopes da Silva
  • Flávia Mitiko Fernandes Kitahara-Céia
  • Ana Maria Bezerra Bandeira
  • Mychelle Vianna Dos Santos
  • Adriana de Alcântara Cury-Saramago
  • Edson Jorge Lima Moreira
  • Catia Cardoso Abdo Quintão
  • Maria Elisa Rodrigues Coimbra
  • Amal Elzubair
  • Marcus Vinícius Almeida Araújo
  • Eduardo Franzotti Sant' Anna
  • José Nelson Mucha
  • Tatiana Féres Assad-Loss
  • Wanderson Miguel Maia Chiesa
  • Norbi Rodrigues Correia
  • Gino Pulitini
  • Marcia Pereira Alves dos Santos
  • Marysilva Ferreira da Costa
  • Jose Henrique Cavalcanti Lima
  • Bianca Esther Cabral Chiesa
  • Núbia Carvalho de Souza Navegante
  • Luciane M Menezes
  • Priscila Rocha Coimbra
  • Julio Pedra e Cal-Neto
  • Antonio de Moraes Izquierdo
  • Mônica Tirre de Souza Araújo
  • Paulo Guilherme Coelho
  • Norman Duque Penedo
  • Jayme Pereira de Gouvêa
  • Renata Andriola de Almeida
  • Mônica Schultz Neves
  • Márcia Valéria B Vieira
  • João Carlos Miguez Suarez

Detail Information

Publications23

  1. doi request reprint Improving osseointegration of dental implants
    Carlos Nelson Elias
    Instituto Militar de Engenharia, Biomaterials Laboratory, Pr Gen Tiburcio 80, 22290 270 Rio de Janeiro, RJ, Brazil
    Expert Rev Med Devices 7:241-56. 2010
    ..This review focuses on different types of dental implant surfaces and the influence of surface characteristics on osseointegration...
  2. doi request reprint Mechanical properties, surface morphology and stability of a modified commercially pure high strength titanium alloy for dental implants
    Carlos Nelson Elias
    Biomaterials Laboratory, Instituto Militar de Engenharia, Brazil Electronic address
    Dent Mater 31:e1-e13. 2015
    ..The purpose of this work was to compare the properties of a modified cp Ti grade 4 (Ti G4 Hard) with those of available cp Ti and Ti G5 alloys...
  3. pmc Preparation of Bioactive Titanium Surfaces via Fluoride and Fibronectin Retention
    Carlos Nelson Elias
    Biomaterials Laboratory, Instituto Militar de Engenharia, Pr Gen Tiburcio 80, 22290 270 Rio de Janeiro, RJ, Brazil
    Int J Biomater 2012:290179. 2012
    ..Conclusion. The preparation of bioactive titanium surfaces via fluoride and FN retention proved to be a useful treatment to optimize and to accelerate the osseointegration process for dental implants...
  4. pmc Orthodontic implants: concepts for the orthodontic practitioner
    Carlos Nelson Elias
    Biomaterials Laboratory, Military Institute of Engineering, 22290 270 Rio de Janeiro, RJ, Brazil
    Int J Dent 2012:549761. 2012
    ..The purpose of this paper is to update practitioners on the current concepts of orthodontic implants and orthodontic mechanics...
  5. doi request reprint Influence of implant shape, surface morphology, surgical technique and bone quality on the primary stability of dental implants
    Carlos Nelson Elias
    Biomaterials Laboratory, Instituto Militar de Engenharia, Rio de Janeiro, RJ, Brazil
    J Mech Behav Biomed Mater 16:169-80. 2012
    ..The highest insertion torque was that of anodized tapered implants inserted into undersized sites. Finally, the primary stability of dental implants is highly dependent on implant design, surgical technique and substrate type...
  6. doi request reprint Relationship between surface properties (roughness, wettability and morphology) of titanium and dental implant removal torque
    Carlos Nelson Elias
    Biomaterials Laboratory, Instituto Militar de Engenharia, Pr Gen Tiburcio 80, 22290 270 Rio de Janeiro, RJ, Brazil
    J Mech Behav Biomed Mater 1:234-42. 2008
    ....
  7. ncbi request reprint Force-deflection properties of initial orthodontic archwires
    Catia Cardoso Abdo Quintão
    Department of Orthodontics, State University of Rio de Janeiro, Rio de Janeiro, Brazil
    World J Orthod 10:29-32. 2009
    ..The study tested four wire designs: multistranded stainless steel, conventional stainless steel, superelastic nickel-titanium, and thermoactivated nickel-titanium archwires...
  8. doi request reprint Sequential bone healing of immediately loaded mini-implants
    Glaucio Serra
    University of California at San Diego Engineering Military Institute, Rio de Janeiro, Brazil
    Am J Orthod Dentofacial Orthop 134:44-52. 2008
    ..The purpose of this study was to analyze interfacial healing 1, 4, and 12 weeks after the placment of titanium mini-implants in New Zealand rabbits by removal torque test (RTT) and scanning electron microscopy (SEM)...
  9. doi request reprint The effects of superficial roughness and design on the primary stability of dental implants
    Mychelle Vianna Dos Santos
    Biomaterials Laboratory, Instituto Militar de Engenharia, Rio de Janeiro, RJ, Brazil
    Clin Implant Dent Relat Res 13:215-23. 2011
    ..Primary implant stability has been used as an indicator for future osseointegration and whether an immediate/early loading protocol should be applied. Implant stability is the key to clinical success...
  10. doi request reprint Influence of thermal or chemical degradation on the frictional force of an experimental coated NiTi wire
    Ana Maria Bezerra Bandeira
    Program of Metallurgical and Materials Engineering, COPPE, Federal University of Rio de Janeiro, Rio de Janeiro, Brazil
    Angle Orthod 81:484-9. 2011
    ..The null hypothesis is that there will be no difference among the wires as to friction force...
  11. doi request reprint Influence of curvature location along an artificial canal on cyclic fatigue of a rotary nickel-titanium endodontic instrument
    Hélio Pereira Lopes
    Department of Endodontics, Faculty of Dentistry, Estacio de Sa University, Rio de Janeiro, Brazil
    Oral Surg Oral Med Oral Pathol Oral Radiol Endod 111:792-6. 2011
    ....
  12. doi request reprint Mechanical testing and finite element analysis of orthodontic teardrop loop
    Maria Elisa Rodrigues Coimbra
    Department of Orthodontics, Universidade Federal do Rio de Janeiro, Rio de Janeiro, Brazil
    Am J Orthod Dentofacial Orthop 133:188.e9-13. 2008
    ..The purpose of this study was to evaluate the use of computer simulation to predict the force and the torsion obtained after the activation of tear drop loops of 3 heights...
  13. doi request reprint Cross-section dimensions and mechanical properties of esthetic orthodontic coated archwires
    Dayanne Lopes da Silva
    Department of Orthodontics, Universidade Federal do Rio de Janeiro, Rio de Janeiro, Brazil
    Am J Orthod Dentofacial Orthop 143:S85-91. 2013
    ....
  14. doi request reprint Nanostructured severe plastic deformation processed titanium for orthodontic mini-implants
    Glaucio Serra
    Fluminense Federal University Nova Friburgo, Rio de Janeiro, Brazil
    Mater Sci Eng C Mater Biol Appl 33:4197-202. 2013
    ....
  15. ncbi request reprint In vitro evaluation of frictional forces between archwires and ceramic brackets
    Clarice Nishio
    Department of Orthodontics, Universidade Federal Fluminense, Niteroi, RJ, Brazil
    Am J Orthod Dentofacial Orthop 125:56-64. 2004
    ..The frictional force values were directly proportional to the angulation increase between the bracket and the wire...
  16. ncbi request reprint Cyclic fatigue of ProTaper instruments
    Hélio Pereira Lopes
    ABE RJ and UNESA, Rio de Janeiro, Brazil
    J Endod 33:55-7. 2007
    ....
  17. ncbi request reprint The physical characterization of a thermoplastic polymer for endodontic obturation
    Amal Elzubair
    Biomaterials Laboratory, Instituto Militar de Engenharia, Pr Gen Tiburcio 80, Praia Vermelha, Rio de Janeiro, RJ, Brazil
    J Dent 34:784-9. 2006
    ..To analyze a new endodontic sealer material commercially known as Resilon and to describe in detail the experimental techniques employed that lead to the identification of the composite material...
  18. pmc Stability of smooth and rough mini-implants: clinical and biomechanical evaluation - an in vivostudy
    Giselle Naback Lemes Vilani
    Universidade Federal do Rio de Janeiro, Rio de Janeiro, Rio de Janeiro, Brazil
    Dental Press J Orthod 20:35-42. 2015
    ..To compare in vivo orthodontic mini-implants (MI) of smooth (machined) and rough (acid etched) surfaces, assessing primary and secondary stability...
  19. ncbi request reprint Morphological evaluation of the active tip of six types of orthodontic mini-implants
    Flávia Mitiko Fernandes Kitahara-Céia
    UFF, Niteroi, RJ, Brazil
    Dental Press J Orthod 18:36-41. 2013
    ..To morphologically evaluate the active tip of six different types of self-drilling mini-implants for orthodontic anchorage...
  20. pmc Efficiency of different protocols for enamel clean-up after bracket debonding: an in vitro study
    Lara Carvalho Freitas Sigilião
    Brazilian Navy, Rio de Janeiro, Rio de Janeiro, Brazil
    Dental Press J Orthod 20:78-85. 2015
    ..This study aimed to assess the efficiency of six protocols for cleaning-up tooth enamel after bracket debonding...
  21. doi request reprint Assessment of exogenous pigmentation in colourless elastic ligatures
    Alline Birra Nolasco Fernandes
    Department of Orthodontics, Federal University of Rio de Janeiro, Rio de Janeiro, RJ, Brazil
    J Orthod 41:147-51. 2014
    ..The aim of this study was to evaluate colour alteration of transparent elastic ligatures submitted to exogenous pigmentation...
  22. doi request reprint Ceramic surface polishing techniques after removal of orthodontic adhesive
    Adriana de Alcântara Cury-Saramago
    Department of Orthodontics, Federal University of Rio de Janeiro, Rio de Janeiro, Brazil
    Angle Orthod 79:790-5. 2009
    ..Verify the in vitro effectiveness of different porcelain surface polishing systems used after orthodontic debonding...