dental debonding

Summary

Summary: Techniques used for removal of bonded orthodontic appliances, restorations, or fixed dentures from teeth.

Top Publications

  1. doi Rebonding of orthodontic brackets. Part I, a laboratory and clinical study
    Mona A Montasser
    Department of Orthodontics, Faculty of Dentistry, Mansoura University, Mansoura, Egypt
    Angle Orthod 78:531-6. 2008
  2. doi Effect of self-etchant pH on the shear bond strength of orthodontic brackets
    Adam W Ostby
    College of Dentistry, University of Iowa, Iowa City, IA 52242 1001, USA
    Am J Orthod Dentofacial Orthop 134:203-8. 2008
  3. ncbi Effectiveness of a hydrophilic primer when different antimicrobial agents are mixed
    Ali Ihya Karaman
    Selcuk University, School of Dentistry, Department of Orthodontics, Konya, Turkey
    Angle Orthod 74:414-9. 2004
  4. ncbi In-vivo and in-vitro comparison of bond strengths of orthodontic brackets bonded to enamel and debonded at various times
    Manar K A Hajrassie
    Orthodontists Division, King Saud University, Riyad specialist in orthodontics, Ministry of Health, King Fahad Hospital, Jeddah, Saudi Arabia
    Am J Orthod Dentofacial Orthop 131:384-90. 2007
  5. ncbi Bond strength and debonding characteristics of a new ceramic bracket
    Jia Kuang Liu
    Department of Dentistry, National Cheng Kung University, 138 Sheng Li Road, Tainan 204, Taiwan, ROC
    Am J Orthod Dentofacial Orthop 128:761-5; quiz 802. 2005
  6. ncbi Effect of argon laser curing on the shear bond strength of metal brackets bonded with light-cured glass ionomer cement
    Glaucio Serra
    Biomedical laser center, IPD UNIVAP, Sao Jose dos Campos, Sao Paulo, Brazil
    Am J Orthod Dentofacial Orthop 128:740-3; quiz 802. 2005
  7. doi Effects of sandblasting and silica coating on the bond strength of rebonded mechanically retentive ceramic brackets
    M Serdar Toroglu
    Department of Orthodontics, Cukurova University, Balcali, 01330, Adana, Turkey
    Am J Orthod Dentofacial Orthop 134:181e1-7. 2008
  8. ncbi A comparison of tungsten-quartz-halogen, plasma arc and light-emitting diode light sources for the polymerization of an orthodontic adhesive
    Bikram S Thind
    Department of Orthodontics and Restorative Dentistry, Glenfield Hospital, Leicester, UK
    Eur J Orthod 28:78-82. 2006
  9. ncbi A new one-step dental flowable composite for orthodontic use: an in vitro bond strength study
    Simona Tecco
    Department of Oral Sciences, Pescara, University G D Annunzio, Chieti, Italy
    Angle Orthod 75:672-7. 2005
  10. ncbi Office reconditioning of stainless steel orthodontic attachments
    Andrew N Quick
    Discipline of Orthodontics, School of Dentistry, University of Otago, PO Box 647, Dunedin, New Zealand
    Eur J Orthod 27:231-6. 2005

Research Grants

  1. Root deformation and root resorption
    Thomas Katona; Fiscal Year: 2006

Detail Information

Publications120 found, 100 shown here

  1. doi Rebonding of orthodontic brackets. Part I, a laboratory and clinical study
    Mona A Montasser
    Department of Orthodontics, Faculty of Dentistry, Mansoura University, Mansoura, Egypt
    Angle Orthod 78:531-6. 2008
    ..To compare rebonding of orthodontic brackets based on the hypothesis that no difference would be found between the adhesive systems with respect to shear bond strength, mode of failure, and clinical failure rates...
  2. doi Effect of self-etchant pH on the shear bond strength of orthodontic brackets
    Adam W Ostby
    College of Dentistry, University of Iowa, Iowa City, IA 52242 1001, USA
    Am J Orthod Dentofacial Orthop 134:203-8. 2008
    ..Although serving the same purpose, SEPs differ in acidity and aggressiveness. Thus, the purpose of this study was to determine whether the pH of SEPs affects the shear bond strength of orthodontic brackets...
  3. ncbi Effectiveness of a hydrophilic primer when different antimicrobial agents are mixed
    Ali Ihya Karaman
    Selcuk University, School of Dentistry, Department of Orthodontics, Konya, Turkey
    Angle Orthod 74:414-9. 2004
    ..Application of different antimicrobial agents may result in differences in the site of failure...
  4. ncbi In-vivo and in-vitro comparison of bond strengths of orthodontic brackets bonded to enamel and debonded at various times
    Manar K A Hajrassie
    Orthodontists Division, King Saud University, Riyad specialist in orthodontics, Ministry of Health, King Fahad Hospital, Jeddah, Saudi Arabia
    Am J Orthod Dentofacial Orthop 131:384-90. 2007
    ..An in-vivo debonding device was validated and used to measure bond strengths in the oral environment...
  5. ncbi Bond strength and debonding characteristics of a new ceramic bracket
    Jia Kuang Liu
    Department of Dentistry, National Cheng Kung University, 138 Sheng Li Road, Tainan 204, Taiwan, ROC
    Am J Orthod Dentofacial Orthop 128:761-5; quiz 802. 2005
    ....
  6. ncbi Effect of argon laser curing on the shear bond strength of metal brackets bonded with light-cured glass ionomer cement
    Glaucio Serra
    Biomedical laser center, IPD UNIVAP, Sao Jose dos Campos, Sao Paulo, Brazil
    Am J Orthod Dentofacial Orthop 128:740-3; quiz 802. 2005
    ..The purpose of this study was to evaluate the shear bond strength and debonding characteristics of glass ionomer cement cured with an argon laser...
  7. doi Effects of sandblasting and silica coating on the bond strength of rebonded mechanically retentive ceramic brackets
    M Serdar Toroglu
    Department of Orthodontics, Cukurova University, Balcali, 01330, Adana, Turkey
    Am J Orthod Dentofacial Orthop 134:181e1-7. 2008
    ..The aim of this study was to determine the bond strength of rebonded mechanically retentive ceramic brackets after treatment with 2 abrasive techniques...
  8. ncbi A comparison of tungsten-quartz-halogen, plasma arc and light-emitting diode light sources for the polymerization of an orthodontic adhesive
    Bikram S Thind
    Department of Orthodontics and Restorative Dentistry, Glenfield Hospital, Leicester, UK
    Eur J Orthod 28:78-82. 2006
    ..Polymerization, as effective as that produced by conventional bulb light sources, was obtained with the short exposure times recommended for the plasma arc or light-emitting diode sources...
  9. ncbi A new one-step dental flowable composite for orthodontic use: an in vitro bond strength study
    Simona Tecco
    Department of Oral Sciences, Pescara, University G D Annunzio, Chieti, Italy
    Angle Orthod 75:672-7. 2005
    ..Further studies are required to evaluate the enamel surface of the teeth after the same polishing procedure in the four groups...
  10. ncbi Office reconditioning of stainless steel orthodontic attachments
    Andrew N Quick
    Discipline of Orthodontics, School of Dentistry, University of Otago, PO Box 647, Dunedin, New Zealand
    Eur J Orthod 27:231-6. 2005
    ..Silane application did not improve the bond strength values of flamed and ultrasonically cleaned brackets. Attachments that had only been flamed had the lowest bond strength, followed by those that had been roughened with a greenstone...
  11. ncbi Influence of force location in orthodontic shear bond strength testing
    Arndt Klocke
    Department of Orthodontics, University Hospital Hamburg Eppendorf, Kieferorthopaedie, ZZMK, Pav O 53, Martinistr 52, D 20246 Hamburg, Germany
    Dent Mater 21:391-6. 2005
    ..The purpose of the present study was to analyze the influence of debonding force location in shear bond strength testing of orthodontic brackets in vitro...
  12. doi Bond strength of 4 orthodontic adhesives used with a caries-protective resin sealant
    Phillip D Lowder
    Aspen Orthodontics, PO Box 246, Rigby, ID 83442, USA
    Am J Orthod Dentofacial Orthop 134:291-5. 2008
    ....
  13. ncbi Effect of water storage on the shear bond strength of a cyanoacrylate adhesive: clinical implications
    Raed Ajlouni
    Baylor College of Dentistry, University of Texas, Dallas, Texas, USA
    World J Orthod 5:250-3. 2004
    ....
  14. doi Shear bond strength of a new high fluoride release glass ionomer adhesive
    Samir E Bishara
    College of Dentistry, University of Iowa, Iowa City, Iowa 52242, USA
    Angle Orthod 78:125-8. 2008
    ..To determine the shear bond strength of a new resin glass ionomer adhesive with higher fluoride release properties when bonding orthodontic brackets...
  15. ncbi The effect of variation in mesh-base design on the shear bond strength of orthodontic brackets
    Samir E Bishara
    Department of Orthodontics, College of Dentistry, University of Iowa, Iowa City, Iowa 52242, USA
    Angle Orthod 74:400-4. 2004
    ..0, P = .5). These results indicated that single- and double-mesh bracket bases have comparable shear bond strength and bracket failure modes...
  16. ncbi Effect of loading mode on bond strength of orthodontic brackets bonded with 2 systems
    Thomas R Katona
    Indiana University School of Dentistry, and Mechanical Engineering, Purdue University School of Engineering and Technology, Indianapolis, Ind, USA
    Am J Orthod Dentofacial Orthop 129:60-4. 2006
    ..The primary purpose of this project was to ascertain whether the mode of in-vitro bracket debonding used in a study affects the measured bond strength. The secondary aim was to compare the bond strengths of 2 different bonding systems...
  17. doi Rebonding of orthodontic brackets. Part II, an XPS and SEM study
    Mona A Montasser
    Department of Orthodontics, Faculty of Dentistry, Mansoura University, Mansoura, Egypt
    Angle Orthod 78:537-44. 2008
    ....
  18. ncbi Development of an easy-debonding orthodontic adhesive using thermal heating
    Takashi Tsuruoka
    Department of Orthodontics, Nihon University School of Dentistry, 1 8 13, Kanda Surugadai, Chiyoda ku, Tokyo 101 8310, Japan
    Dent Mater J 26:78-83. 2007
    ....
  19. ncbi Effect of different types of enamel conditioners on the bond strength of orthodontic brackets
    A R Davari
    Department of Operative Dentistry, Faculty of Dentistry, Shahid Sadoughi University of Medical Sciences, Yazd, Iran
    J Contemp Dent Pract 8:36-43. 2007
    ..The purpose of this study was to determine the effects of the use of a self-etching primer on the bond strength of orthodontic brackets and on the bracket/adhesive failure mode...
  20. ncbi A self-conditioner for resin-modified glass ionomers in bonding orthodontic brackets
    Samir E Bishara
    Orthodontic Department, College of Dentistry, University of Iowa, Iowa City, IA 52242, USA
    Angle Orthod 77:711-5. 2007
    ..To evaluate a new self-etch conditioner used with resin-modified glass ionomers (RMGIs) in bonding orthodontic brackets...
  21. ncbi Evaluation of the debonding strength of orthodontic brackets using three different bonding systems
    R Valletta
    Department of Oral and Maxillo Facial Science, University of Naples Federico II
    Eur J Orthod 29:571-7. 2007
    ..Of the three modes examined, torsional debonding stress resulted in the least enamel damage...
  22. ncbi The use of a flowable ormocer for bonding brackets
    Ascension Vicente
    Orthodontic Teaching Unit, Dental Clinic, The University of Murcia, Hospital Morales Meseguer, 2a planta, C Marqués de los Vélez, s n 30008 Murcia, Spain
    Am J Dent 20:292-4. 2007
    ..To evaluate the effectiveness of the ormocer Admira Flow for bonding brackets...
  23. doi Evaluation of failure characteristics and bond strength after ceramic and polycarbonate bracket debonding: effect of bracket base silanization
    M Ozcan
    Department of Dentistry and Dental Hygiene, Clinical Dental Biomaterials, University Medical Centre Groningen, The Netherlands
    Eur J Orthod 30:176-82. 2008
    ..0227) brackets. Failure type was not significantly different when brackets were debonded with a universal testing machine or with orthodontic debonding pliers. No enamel damage was observed in any of the groups...
  24. doi A new generation of self-etching adhesives: comparison with traditional acid etch technique
    Marcus Holzmeier
    Department of Orthodontics, Friedrich Alexander University, Erlangen Nuremberg, Germany
    J Orofac Orthop 69:78-93. 2008
    ..cement (SE Zement) used with and without prior phosphoric acid-etching, and to compare them to an orthodontic self-etching product (Transbond Plus SE Primer) and to traditional acid-etch technique (Transbond XT Primer, phosphoric acid)..
  25. ncbi Clinical evaluation of orthodontic self-etching primers
    R Reagon Noble
    University of Texas Dental Branch, Houston, USA
    Tex Dent J 123:274-8. 2006
  26. ncbi Effect of resin-removal methods on enamel and shear bond strength of rebonded brackets
    Neslihan Eminkahyagil
    Department of Conservative Dentistry, Baskent University, Bahcelievler 06490, Ankara, Turkey
    Angle Orthod 76:314-21. 2006
    ..Sof-lex discs were the most time-consuming procedures and left much adhesive remnant. The high-speed TCB was found to be the most hazardous to the enamel. The scarring of enamel after the debonding is inevitable but can be reduced...
  27. ncbi Shear/peel bond strength of orthodontic attachments to moist and dry enamel
    Benjamin R Nemeth
    Division of Orthodontics, University of Manitoba, Winnipeg, Manitoba, Canada
    Am J Orthod Dentofacial Orthop 129:396-401. 2006
    ..The purpose of this study was to evaluate the in-vitro shear-peel bond strength of orthodontic attachments bonded to moist and dry enamel surfaces with orthodontic resin...
  28. ncbi Effects of 3 adhesion promoters on the shear bond strength of orthodontic brackets: an in-vitro study
    Ascension Vicente
    Dental Clinic, University of Murcia, Murcia, Spain
    Am J Orthod Dentofacial Orthop 129:390-5. 2006
    ....
  29. ncbi Effect of debonding force direction on orthodontic shear bond strength
    Arndt Klocke
    Department of Orthodontics, University of Hamburg, School of Dental Medicine, Hamburg, Germany
    Am J Orthod Dentofacial Orthop 129:261-5. 2006
    ..The aim of this study was to determine the influence of debonding force direction in shear bond strength testing of orthodontic brackets in vitro...
  30. ncbi A comparison of shear bond strength and debonding characteristics of conventional, moisture-insensitive, and self-etching primers in vitro
    Rangaswamy Rajagopal
    Department of Orthodontics and Dentofacial Orthopedics, Saveetha Dental College and Hospitals, Chennai, Tamil Nadu, India
    Angle Orthod 74:264-8. 2004
    ..All primers showed typical debonding characteristics of separation at the bracket-adhesive interface or within the adhesive itself, with the exception of the conventional primer used with moisture-contaminated enamel...
  31. ncbi Tensile bond strength of ceramic brackets bonded to porcelain facets
    Doron Harari
    Department of Orthodontics, Hadassah School of Dental Medicine, Hebrew University, PO Box 12272, Jerusalem, Israel 91120
    Am J Orthod Dentofacial Orthop 123:551-4. 2003
    ..This study shows that both Ideal 1 and Right-On are suitable for bonding ceramic brackets to porcelain restorations, if the porcelain has been conditioned with hydrofluoric acid...
  32. ncbi Effect of using self-etching primer for bonding orthodontic brackets
    Rieko Yamada
    Department of Orthodontics, Nihon University School of Dentistry at Matsudo, Chiba, Japan
    Angle Orthod 72:558-64. 2002
    ..Megabond self-etching primer may be a candidate for bonding orthodontic brackets using the resin-modified glass ionomer cement for minimizing the amount of enamel loss...
  33. ncbi Orthodontic in vivo bond strength: comparison with in vitro results
    K L Pickett
    Department of Orthodontics, University of Alabama at Birmingham, USA
    Angle Orthod 71:141-8. 2001
    ..The results appear to indicate that mean bond strengths recorded in vivo following comprehensive orthodontic treatment are significantly lower than bond strengths recorded in vitro...
  34. ncbi Effect of light-emitting diode on bond strength of orthodontic brackets
    Serdar Usumez
    Department of Orthodontics, Faculty of Dentistry, Selcuk University, Konya, Turkey
    Angle Orthod 74:259-63. 2004
    ....
  35. ncbi Effects of high-speed curing devices on shear bond strength and microleakage of orthodontic brackets
    Jeffrey W James
    Department of Orthodontics, Baylor College of Dentistry, Texas A and M University System Health Science Center, 3302 Gaston Avenue, Dallas, TX 75246, USA
    Am J Orthod Dentofacial Orthop 123:555-61. 2003
    ..On the basis of bond strength and microleakage results, the plasma arc light was comparable with or superior to the other curing devices, depending on the adhesive used...
  36. ncbi Shear bond strength and residual adhesive after orthodontic bracket debonding
    A Al Shamsi
    Restorative Department, School of Dentistry, Queen s University, Belfast, Northern Ireland, UK
    Angle Orthod 76:694-9. 2006
    ..These were a resin-modified glass ionomer cement (RMGIC; Fuji ORTHO LC, GC Corporation, Tokyo, Japan) and a resin applied as a precoated bracket (APC bracket, 3M Unitek GmbH, Seefeld, Germany)...
  37. ncbi The influence of orthodontic bracket base design on shear bond strength
    Seema K Sharma-Sayal
    University of Toronto, Ontario, Canada
    Am J Orthod Dentofacial Orthop 124:74-82. 2003
    ..05). Chairside sandblasting significantly affected the 1-hour, but not the 24-hour, mean shear bond strengths (ANOVA, P <.05). Sandblasting appears to be an effective method of cleaning bracket bases before rebonding...
  38. ncbi Laser etching of enamel for direct bonding with an Er,Cr:YSGG hydrokinetic laser system
    Serdar Usumez
    Faculty of Dentistry, Department of Orthodontics, Selcuk University, Konya 42079, Turkey
    Am J Orthod Dentofacial Orthop 122:649-56. 2002
    ..Although laser devices are effectively used in some other areas of dentistry, enamel conditioning with an Er,Cr:YSGG laser cannot be considered a successful alternative to the conventional methods of increasing bond strengths to enamel...
  39. ncbi Plasma arc curing lights for orthodontic bonding
    Arndt Klocke
    Department of Orthodontics, College of Dentistry, University of Hamburg, UKE, Martinistrasse 52, 20246 Hamburg, Germany
    Am J Orthod Dentofacial Orthop 122:643-8. 2002
    ..Six seconds of curing time is recommended for bonding stainless steel brackets with xenon plasma arc light sources...
  40. ncbi The effect of repeated bonding on the shear bond strength of different orthodontic adhesives
    Samir E Bishara
    Department of Orthodontics, University of Iowa, Iowa City, IA 52242, USA
    Am J Orthod Dentofacial Orthop 121:521-5. 2002
    ..The changes in bond strength after repeated bonding may be related to changes in the morphologic characteristics of the tooth surface caused by adhesive remnants...
  41. ncbi Bonding properties of newly erupted and mature premolars
    Eser Tufekci
    Department of Orthodontics, School of Dentistry, Virginia Commonwealth University, Richmond, VA 23298 0566, USA
    Am J Orthod Dentofacial Orthop 131:753-8. 2007
    ..The nature of adhesive bond failure among the groups was also compared by using the adhesive remnant index (ARI)...
  42. ncbi Plasma arc curing of ceramic brackets: an evaluation of shear bond strength and debonding characteristics
    Arndt Klocke
    Department of Orthodontics, College of Dentistry, University of Hamburg, 20246 Hamburg, Germany
    Am J Orthod Dentofacial Orthop 124:309-15. 2003
    ..Significant differences were also found for the curing methods used (P =.047). A curing interval of 3 seconds with the plasma arc curing light is recommended for both polycrystalline and monocrystalline ceramic brackets...
  43. ncbi Comparison of shear bond strength of metal brackets bonded to porcelain surface using different surface conditioning methods: an in vitro study
    P V Girish
    Department of Orthodontics, NSVK Sri Venkateshwara Dental College, Bengaluru 560083, Karnataka, India
    J Contemp Dent Pract 13:487-93. 2012
    ..To evaluate and compare the shear bond strength of metal brackets bonded to ceramic surfaces using different conditioning methods and to assess the site of bond failure after debonding...
  44. ncbi Influence of the temperature on the cement disintegration in cement-retained implant restorations
    Tomas Linkevicius
    Institute of Odontology, Faculty of Medicine, Vilnius University, Vilnius, Lithuania
    Stomatologija 14:114-7. 2012
    ..Within the limitations of the study, it could be concluded that RGIC cement disintegrates at the lowest temperature and ZPC is not prone to break down after exposure to temperature...
  45. doi Effects of different application durations of scanning laser method on debonding strength of laminate veneers
    Mehmet Oguz Oztoprak
    Department of Orthodontics, Faculty of Dentistry, Yeditepe University, Istanbul, Turkey
    Lasers Med Sci 27:713-6. 2012
    ..0001). This study showed that all three application times of Er-YAG laser were effective for debonding ceramic laminate veneers by softening the adhesive resin...
  46. doi Enamel colour changes after debonding using various bonding systems
    Abbas R Zaher
    Alexandria University, Alexandria, Egypt
    J Orthod 39:82-8. 2012
    ..To test the possible association between enamel colour alteration and resin tag depth...
  47. doi Enamel loss and adhesive remnants following bracket removal and various clean-up procedures in vitro
    Sacha Ryf
    Departments of Orthodontics and Dentofacial Orthopedics, Klinik für Kieferorthopädie der Universität Bern, Freiburgstrasse 7, Bern, Switzerland
    Eur J Orthod 34:25-32. 2012
    ..32 mm(3)). There were no statistically significant differences in volumetric changes after polishing (P = 0.054) between the different clean-up methods. However, sufficient clean-up without enamel loss was difficult to achieve...
  48. doi Influence of pre-treatments on flexural strength of zirconia and debonding crack-initiation strength of veneered zirconia
    Manabu Doi
    Division of Applied Prosthodontics, Nagasaki University Graduate School of Biomedical Sciences, Nagasaki, Japan
    J Adhes Dent 13:79-84. 2011
    ....
  49. doi Effects of tooth bleaching on shear bond strength of brackets rebonded with a self-etching adhesive system
    Ryota Abe
    Orthodontic Dentistry, The Nippon Dental University Niigata Hospital, 1 8 Hamaura cho, Chuo Ku, Niigata, 951 8580, Japan
    Odontology 99:83-7. 2011
    ..The bracket-rebonding procedure can recover the reduced shear bond strength caused by immediate bonding after bleaching to a clinically acceptable level, but not to the prebleaching level...
  50. ncbi Clinical efficacy of the Vector system in excess cement removal during fixed prosthodontic treatment
    Gokhan Akgungor
    Department of Fixed Prosthodontics, Istanbul University, Turkey
    Quintessence Int 39:e139-46. 2008
    ..To evaluate the clinical effectiveness of the Vector system (Durr Dental) in excess cement removal from subgingival margins during fixed prosthodontic treatment...
  51. doi In-vitro study of the effect of casein phosphopeptide amorphous calcium fluoride phosphate on iatrogenic damage to enamel during orthodontic adhesive removal
    Roslyn J Mayne
    Cooperative Research Centre for Oral Health Science, Bio21 Institute, Melbourne Dental School, University of Melbourne, Melbourne, Victoria, Australia
    Am J Orthod Dentofacial Orthop 139:e543-51. 2011
    ....
  52. ncbi Efficiency and effectiveness of fiber post removal using 3 techniques
    Gerald C Anderson
    Division of Endodontics, Department of Restorative Sciences, University of Minnesota, Minneapolis, MN 55455, USA
    Quintessence Int 38:663-70. 2007
    ..To evaluate the speed (efficiency) and effectiveness of 3 different fiber post removal systems...
  53. ncbi The effects of bracket removal on enamel
    Farzin Heravi
    Department of Orthodontics and Dental Research Center, School of Dentistry, Mashhad University of Medical Sciences, Mashhad, Iran
    Aust Orthod J 24:110-5. 2008
    ..Enamel cracks, which may develop during debonding orthodontic brackets, may jeopardise the integrity of the enamel and detract from the appearance of the teeth...
  54. ncbi Shear bond strength, bond failure, and scanning electron microscopy analysis of a new flowable composite for orthodontic use
    Michele D'Attilio
    Department of Orthodontics, University G D Annunzio, Chieti, Via Le Mainarde 26, Pescara 65121, Italy
    Angle Orthod 75:410-5. 2005
    ..In conclusion, Denfil Flow displayed the same SBS as traditional composite resins and similar bond failures. Further clinical studies are required...
  55. doi Orthodontic bracket lost in the airway during orthognathic surgery
    Jose Rodrigues Laureano Filho
    Department of Oral and Maxillofacial Surgery, University of Pernambuco, Recife, Brazil
    Am J Orthod Dentofacial Orthop 134:288-90. 2008
    ....
  56. ncbi Shear bond strength of a new fluoride-releasing orthodontic adhesive
    Rogelio José Scougall Vilchis
    Department of Prosthodontics, Division of Oral Functional Science and Rehabilitation, School of Dentistry, Asahi University, 1851 Hozumi, Mizuho City, Gifu 501 0296, Japan
    Dent Mater J 26:45-51. 2007
    ..Nonetheless, these mean values were higher than the average suggested by Reynolds as optimum for clinical treatment...
  57. doi Effects of casein phosphopeptide amorphous calcium fluoride phosphate paste on white spot lesions and dental plaque after orthodontic treatment: a 3-month follow-up
    M W Beerens
    Department of Orthodontics, Academic Center of Dentistry Amsterdam ACTA, University of Amsterdam and Free University Amsterdam, Amsterdam, The Netherlands
    Eur J Oral Sci 118:610-7. 2010
    ..4 to 38.1% and from 9.6 to 6.6%, respectively. No differences were found between groups. We observed no clinical advantage for use of the CPP-ACFP paste supplementary to normal oral hygiene over the time span of 12 wk...
  58. doi Analysis of temperature rise and the use of coolants in the dissipation of ultrasonic heat buildup during post removal
    Stephen Davis
    Endodontic Residency Program, Veterans Affairs Hospital, Long Beach, California, USA
    J Endod 36:1892-6. 2010
    ..This study was designed to calculate probabilities for tissue injury and to measure effectiveness of various coolant strategies in countering heat buildup produced by dry ultrasonic vibration during post removal...
  59. ncbi Evaluation of different flowable materials for bonding brackets
    Ascension Vicente
    Orthodontic Teaching Unit, Dental Clinic, The University of Murcia, Hospital Morales Meseguer, 2nd Floor, C Marqués de los Vélez, S N, 30008 Murcia, Spain
    Am J Dent 22:111-4. 2009
    ....
  60. doi Efficacy of Profile .04 taper series 29 in removing filling materials during root canal retreatment--an in vitro study
    Luciana Viti Betti
    Bauru School of Dentistry, University of Sao Paulo, Brazil
    Oral Surg Oral Med Oral Pathol Oral Radiol Endod 108:e46-50. 2009
    ..The aim of this study was to compare Profile .04 taper series 29 instruments and hand files for gutta-percha removal...
  61. ncbi Influence of luting agents on time required for cast post removal by ultrasound: an in vitro study
    Janir Alves Soares
    Department of Dentistry, Federal University of Valleys of Jequitinhonha and Mucuri, Diamantina, MG, Brazil
    J Appl Oral Sci 17:145-9. 2009
    ..This in vitro study evaluated the influence of luting agents on ultrasonic vibration time for intraradicular cast post removal...
  62. ncbi Crown and bridge disassembly--when, why and how
    L D Addy
    Department of Adult Dental Health, Cardiff University School of Dentistry, UK
    SADJ 63:432, 434-8. 2008
    ..The aims of this paper are to provide a classification for crown and bridge removal systems; describe how a number of such systems work; and when and why they might be considered...
  63. doi Failure analysis: enamel fracture after debonding orthodontic brackets
    Chen Sheng Chen
    School of Dentistry, National Yang Ming University, Taipei, Taiwan
    Angle Orthod 78:1071-7. 2008
    ..To determine the location and size of enamel fracture (EF) when debonding a bracket...
  64. doi The effects of tooth preparation cleansing protocols on the bond strength of self-adhesive resin luting cement to contaminated dentin
    Yada Chaiyabutr
    Department of Restorative Dentistry, University of Washington, Kois Center, Seattle, WA, USA
    Oper Dent 33:556-63. 2008
    ....
  65. doi Effect of various chemicals as solvents on the dissolution of set white mineral trioxide aggregate: an in vitro study
    Suresh Nandini
    Department of Conservative Dentistry and Endodontics, Meenakshi Ammal Dental College, Maduravoyal, Chennai, Tamil Nadu, India
    J Endod 36:135-8. 2010
    ..Because MTA is alkaline in nature, it might interact with acids or chemicals and could disintegrate. The aim of this study was to assess the effect of various chemicals on dissolution of white MTA (WMTA)...
  66. ncbi Enamel bonding of self-etching and phosphoric acid-etching orthodontic adhesives in simulated clinical conditions: debonding force and enamel surface
    Shinya Horiuch
    Department of Orthodontics and Dentofacial Orthopedics, The University of Tokushima Graduate School of Oral Sciences, Tokushima, Japan
    Dent Mater J 28:419-25. 2009
    ..Meanwhile, the two acid-etching adhesives caused considerable demineralization. Taken together, these findings indicated that the action of self-etching systems was evidently more conservative...
  67. doi Demineralization effects of hydrogen peroxide on bovine enamel and relation to shear bond strength of brackets
    Santiago Gonzalez-López
    Department of Pathology and Dental Therapeutics, Faculty of Dentistry, University of Granada, Granada, Spain
    J Adhes Dent 11:461-7. 2009
    ..To measure the demineralization capacity of 37% phosphoric acid and shear bond strength (SBS) of brackets attached on bovine enamel at different times after bleaching with 30% hydrogen peroxide...
  68. doi The biomineralization ability of mineral trioxide aggregate and Portland cement on dentin enhances the push-out strength
    Jessie F Reyes-Carmona
    Postgraduate program of the Federal University of Santa Catarina, Florianopolis, Santa Catarina, Brazil
    J Endod 36:286-91. 2010
    ....
  69. doi Influence of experimental provisional cements containing zeolite, bone hydroxyapatite and linoleic Acid on bond strength of composite to dentin in vitro
    Deniz C Can-Karabulut
    Department of Operation Dentistry, Faculty of Dentistry, Near East University, Mersin, Turkey
    J Adhes Dent 12:469-75. 2010
    ....
  70. doi Usefulness of orthodontic adhesive-containing fluorescent dye
    Yasuhiro Namura
    Department of Orthodontics, Dental Research Center, Nihon University School of Dentistry, Tokyo, Japan
    Eur J Orthod 32:620-6. 2010
    ..Therefore, an adhesive containing less than 0.002 per cent fluorescent dye provides both sufficient bond strength for orthodontic brackets and sufficient fluorescent colour for easy visualization without aesthetic impairment...
  71. doi Enamel surface roughness after debonding
    Sevinc Karan
    Department of Orthodontics, Baskent University Adana Medical Teaching and Research Center, Ankara, Turkey
    Angle Orthod 80:1081-8. 2010
    ..To test the hypotheses that (1) there is no significant difference between the effects of two burs on the surface roughness of enamel after orthodontic debonding, and (2) there is no difference between resin removal times of the two burs...
  72. doi Evaluation of several protocols for the application of ultrasound during the removal of cast intraradicular posts cemented with zinc phosphate cement
    A D B Garrido
    School of Dentistry, Federal University of Amazonas UFAM, Manaus, AM, Brazil
    Int Endod J 42:609-13. 2009
    ..To evaluate several protocols for the application of ultrasound during removal of cast posts with varying core configurations cemented with zinc phosphate...
  73. ncbi Comparative SEM studies of the enamel surface appearance following the use of glass ionomer cement and a diacrylate resin for bracket bonding
    E Ostman Andersson
    Department of Orthodontics,
    Swed Dent J 17:139-46. 1993
    ..Significant alterations in the enamel surface were found irrespective of the bonding procedure. The use of glass ionomer cement resulted however in a somewhat less affected enamel surface compared to the acrylate resin...
  74. ncbi White lesions after orthodontic treatment: does low fluoride make a difference?
    D R Willmot
    Department of Oral Health and Development, School of Clinical Dentistry, University of Sheffield, Claremont Crescent, Sheffield S10 2TA, UK
    J Orthod 31:235-42; discussion 202. 2004
    ..To compare and measure the changes in size of post-orthodontic demineralized white lesion enamel lesions treated with a low fluoride (50 ppm) versus a non-fluoride mouthrinse/toothpaste regime...
  75. ncbi Debonding a new ceramic bracket: a clinical study
    Carlos Diaz
    Department of Orthodontics, Autonomous University of Baja California, Mexicali, Mexico
    J Clin Orthod 38:442-5. 2004
  76. ncbi Comparison of bond strength between a conventional resin adhesive and a resin-modified glass ionomer adhesive: an in vitro and in vivo study
    Andrew Summers
    Department of Restorative Dentistry, West Virginia University School of Dentistry, Morgantown 26506, USA
    Am J Orthod Dentofacial Orthop 126:200-6; quiz 254-5. 2004
    ..The weaker chemical bonding between the adhesive and the enamel might make it easier for clinicians to clean up adhesives on the enamel surface after debonding...
  77. ncbi Evaluation of the debonding characteristics of 2 ceramic brackets: an in vitro study
    Lina P Theodorakopoulou
    Department of Orthodontics, University of Alabama at Birmingham, Birmingham, AL, USA
    Am J Orthod Dentofacial Orthop 125:329-36. 2004
    ..The results indicate that the safest way to remove ceramic brackets with respect to reducing the chance of enamel damage is to use the debonding technique specifically designed for each...
  78. ncbi Possibility of blood and hepatitis B contamination through aerosols generated during debonding procedures
    Mustafa Serdar Toroglu
    Department of Orthodontics, Faculty of Dentistry, University of Cukurova, Adana, Turkey
    Angle Orthod 73:571-8. 2003
    ..HBsAg and HBV-DNA were detected in aerosol sample of only one hepatitis B carrier. The results of this study showed that aerosols generated during the debonding procedure should always be considered as potential hazards to health...
  79. ncbi The effect of saliva contamination on shear bond strength of orthodontic brackets when using a self-etch primer
    Samir E Bishara
    College of Dentistry, University of Iowa, Iowa City, Iowa 52242, USA
    Angle Orthod 72:554-7. 2002
    ..On the other hand, contamination both before and after the application of the primer significantly reduced the shear bond strength of orthodontic brackets...
  80. ncbi Shear bond strength of a new dental adhesive used to bond brackets to unetched enamel
    Doron Harari
    Department of Orthodontics, Hebrew University Hadassah Faculty of Dental Medicine, Jerusalem, Israel
    Eur J Orthod 24:519-23. 2002
    ..8 megapascals (MPa). Bond failure occurred at the enamel-adhesive interface, enabling more efficient enamel clean up. The shear bond strengths measured suggest that IntegraCem adhesive may be effectively used in orthodontic treatment...
  81. ncbi Case report: removal of fractured endodontic posts with a sonic instrument
    George P Cherukara
    Dept of Adult Oral Health, Barts and The London, Queen Mary s School of Medicine and Dentistry, London E1 2AD, UK
    Eur J Prosthodont Restor Dent 10:23-6. 2002
    ..This case report describes the use of a sonic device to dislodge and remove two fractured prefabricated metal endodontic posts from teeth UR1 and UL2. The reader is also introduced to a variety of post removal techniques available...
  82. ncbi Remnant amount and cleanup for 3 adhesives after debracketing
    Valerie A David
    Department of Orthodontics, College of Dentistry, The University of Iowa, Iowa City, IA 52242, USA
    Am J Orthod Dentofacial Orthop 121:291-6. 2002
    ..The graph of a newly introduced qualitative method better reflected the area data. Weighing may be a useful method for quantifying remnant adhesive...
  83. ncbi Alternative method for retention and removal of cement-retained implant prostheses
    F P Valbao
    Department of Prosthodontics, Faculty of Dentistry, Faesa University, Vitoria, Espirito Santo, Brazil
    J Prosthet Dent 86:181-3. 2001
    ..This article describes a simple, quick, and economical technique that makes use of a light-polymerized resin system to facilitate the retention and removal of cement-retained implant prostheses...
  84. ncbi An ex vivo investigation into the use of a plasma arc lamp when using a visible light-cured composite and a resin-modified glass poly(alkenoate) cement in orthodontic bonding
    A P Pettemerides
    Department of Orthodontics, Royal United Hospital, Bath, UK
    J Orthod 28:237-44. 2001
    ..Locus of bond failure was unaffected by the method and length of light curing and was generally mixed mode. CONCLUSIONS: Use of the plasma arc lamp in orthodontic bonding could result in significant time saving...
  85. ncbi An in vitro investigation into the use of resin-modified glass poly(alkenoate) cements as orthodontic bonding agents
    S C Choo
    Department Child Dental Health, Bristol Dental Hospital, London, UK
    Eur J Orthod 23:243-52. 2001
    ..Resin-modified glass poly(alkenoate) cements have a mean force to debond comparable with diacrylate bonding agents. However, unlike diacrylates they undergo surface changes with time, the significance of which is unknown...
  86. ncbi Modified composite or conventional glass ionomer for band cementation? A comparative clinical trial
    T J Gillgrass
    Orthodontics, Department of Child Dental Health, Newcastle upon Tyne Dental Hospital, Newcastle upon Tyne Hospitals NHS Trust, Newcastle upon Tyne, United Kingdom
    Am J Orthod Dentofacial Orthop 120:49-53. 2001
    ..001). A comparison of changes in mean enamel white spot lesion scores during treatment did not reveal significant differences between the cement groups (P =.16)...
  87. ncbi Investigation of bacteremia after orthodontic banding and debanding following chlorhexidine mouth wash application
    N Erverdi
    Department of Orthodontics, Faculty of Dentistry, Marmara University, Istanbul, Turkey
    Angle Orthod 71:190-4. 2001
    ..The application of chlorhexidine mouthwash resulted in a decrease in the prevalence of bacteremia after banding and debanding, but the decrease was not statistically significant...
  88. ncbi Comparison of enamel colour changes associated with orthodontic bonding using two different adhesives
    T Eliades
    Biomaterials Science Unit, University of Manchester, UK
    Eur J Orthod 23:85-90. 2001
    ....
  89. ncbi Bond strength of various fluoride-releasing orthodontic bonding systems. Experimental study
    I Graf
    Department of Orthodontics, University of Cologne, Germany
    J Orofac Orthop 61:191-8. 2000
    ..Glass ionomer used on wet tooth surfaces without etching shows a clinically acceptable bond strength with clean separation from the enamel after debonding...
  90. ncbi Bracket bonding with 15- or 60-second etching and adhesive remaining on enamel after debonding
    R Osorio
    Department of Biomaterials, University of Granada, Spain
    Angle Orthod 69:45-8. 1999
    ..017; p>0.05). SEM evaluation revealed that the shorter etching time created a less retentive enamel surface. Absolute enamel loss also decreased...
  91. ncbi In vivo debonding strength and enamel damage in two orthodontic debonding methods
    Tamar Brosh
    Department of Orthodontics, School of Dental Medicine, The Maurice and Gabriela Goldschleger, Tel Aviv University, Tel Aviv 69978, Israel
    J Biomech 38:1107-13. 2005
    ..However, the latter two were significantly correlated (0.524 < R < 0.895, p < 0.031). Half of the debonding failures developed at the adhesive enamel interface. The results warnts the potential of enamel damage during debonding...
  92. ncbi Thermal changes in the pulp chamber during different adhesive clean-up procedures
    Tancan Uysal
    Department of Orthodontics, Faculty of Dentistry, Erciyes University, Kayseri, Turkey
    Angle Orthod 75:220-5. 2005
    ..Adhesive removal procedures should be performed with adequate water cooling to prevent temperature increases that might be harmful to pulpal tissues...
  93. ncbi Comparison of bonding time and shear bond strength between a conventional and a new integrated bonding system
    Samir E Bishara
    Orthodontic Department, College of Dentistry, University of Iowa, Iowa City, IA 52242, USA
    Angle Orthod 75:237-42. 2005
    ..The clinician has to decide whether the increase in bond strength, the decrease in the total bonding time, and the steps saved during the bonding procedure with the new bonding system balance the increased cost incurred...
  94. ncbi Early shear bond strength of a one-step self-adhesive on orthodontic brackets
    Samir E Bishara
    Department of Orthodontics, College of Dentistry, University of Iowa, Iowa City, 52242, USA
    Angle Orthod 76:689-93. 2006
    ..The purpose of this study was to determine whether a self-adhesive universal cement, RelyX Unicem (3M ESPE, Seefeld, Germany), can be used successfully to bond orthodontic brackets to enamel...
  95. ncbi Effects of self-etching primer on shear bond strength of orthodontic brackets at different debond times
    Tamer Turk
    University of Ondokuz Mayis, Faculty of Dentistry, Department of Orthodontics, Samsun, Turkey
    Angle Orthod 77:108-12. 2007
    ..To evaluate the effect of a self-etching primer on shear bond strengths (SBS) at the different debond times of 5, 15, 30, and 60 minutes and 24 hours...
  96. ncbi Effect of enamel etching on tensile bond strength of brackets bonded in vivo with a resin-reinforced glass ionomer cement
    Gabriella Rosenbach
    Department of Orthodontics, ABO RS, Porto Alegre, Rio Grande do Sul, Brazil
    Angle Orthod 77:113-6. 2007
    ..To evaluate the influence of enamel etching on tensile bond strength of orthodontic brackets bonded with resin-reinforced glass ionomer cement...
  97. ncbi Complications associated with fixed partial dentures with a loose retainer
    Donald A Curtis
    Department of Preventive and Restorative Dental Sciences, University of California San Francisco, School of Dentistry, USA
    J Prosthet Dent 96:245-51. 2006
    ..Excessive force during attempted FPD removal may irreversibly damage dentition...
  98. ncbi Re: Effect of resin-removal methods on enamel and shear bond strength of rebonded brackets
    Philip M Campbell
    Angle Orthod 76:i; author reply i-ii. 2006
  99. ncbi A comparison of the shear-peel and third-order bond strengths of orthodontic brackets with 2 etch techniques and the role of bracket asymmetry
    Alan J Gibb
    School of Dentistry, Indiana University, and of Mechanical Engineering, School of Engineering and Technology, Purdue University, Indianapolis 46202, USA
    Am J Orthod Dentofacial Orthop 130:699.e1-7. 2006
    ..The effects of loading mode and the role of bracket asymmetry were examined. The secondary goal was to test a self-etch enamel preparation system...
  100. ncbi The evaluation of removal of calcium hydroxide paste from an artificial standardized groove in the apical root canal using different irrigation methodologies
    L W M van der Sluis
    Department of Cariology Endodontology Pedodontology, Academic Centre for Dentistry Amsterdam ACTA, Amsterdam, The Netherlands
    Int Endod J 40:52-7. 2007
    ....
  101. ncbi Xeno III self-etching adhesive in orthodontic bonding: the next generation
    Ismail Amra
    Department of Orthodontics, University of the Western Cape, Cape Town, South Africa
    Am J Orthod Dentofacial Orthop 131:160.e11-5. 2007
    ....

Research Grants3

  1. Root deformation and root resorption
    Thomas Katona; Fiscal Year: 2006
    ....