Research Topics
| Chiayi ShenSummaryAffiliation: University of Florida Country: USA Publications
| Collaborators
|
Detail Information
Publications
The effect of mechanical undercuts on the strength of composite repairChiayi Shen
Department of Dental Biomaterials, College of Dentistry, University of Florida, Gainesville 32610 0446, USA
J Am Dent Assoc 135:1406-12; quiz 1467-8. 2004..The authors conducted an in vitro study to test the hypothesis that undercuts prepared in old composite restorations could improve the strength between the restoration and a flowable composite as repair material...- Assessing fluoride concentration uniformity and fluoride release from three varnishesChiayi Shen
University of Florida, College of Dentistry, Department of Dental Biomaterials, Gainesville 32610 0446, USA
J Am Dent Assoc 133:176-82. 2002..The authors investigated the fluoride content uniformity of three commercial fluoride varnishes, as well as their fluoride-release behaviors... 
Fluoride and chlorhexidine release from filled resinsC Shen
Department of Prosthodontics, College of Dentistry, University of Florida, PO Box 100435, 1600 SW Archer Rd, Gainesville, FL 32610 0435, USA
J Dent Res 89:1002-6. 2010..This interaction can be utilized to optimize the release of either agent for therapeutic purposes...- Influence of pH and oxygen-inhibited layer on fluoride release properties of fluoride sealantC Shen
Department of Dental Biomaterials, College of Dentistry, University of Florida, Gainesville, FL 32610, USA
J Dent 35:275-81. 2007.... - Effect of post-silanization drying on the bond strength of composite to ceramicChiayi Shen
Department of Dental Biomaterials, College of Dentistry, University of Florida, Gainesville, 32610 7808, USA
J Prosthet Dent 91:453-8. 2004..The temperature reported for thermally treating silanated ceramics to improve composite-ceramic bonding is often too high for chairside applications... - Repair strength of dental amalgamsChiayi Shen
Department of Dental Biomaterials, College of Dentistry, Health Science Center, University of Florida, Gainesville, FL 32610 0446, USA
Oper Dent 31:122-6. 2006.... - The effect of surface finishing and storage solutions on the color stability of resin-based compositesShreena B Patel
University of Florida, College of Dentistry, Department of Operative Dentistry, Health Science Center, Gainesville 32610 0415, USA
J Am Dent Assoc 135:587-94; quiz 654. 2004..The authors tested the hypothesis that surface-finishing treatments and the type of storage solutions significantly affected the staining of resin-based composites, or RBCs, and unfilled resins, or URs... - Wetting characteristic of ceramic to water and adhesive resinWon-Suck Oh
College of Dentistry, University of Florida, Gainesville, FL 32610, USA
J Prosthet Dent 88:616-21. 2002..The most wettable surface as measured by the resin medium was EXC, followed by ERV and E1C... - Effect of surface topography on the bond strength of a composite to three different types of ceramicWon suck Oh
Department of Prosthodontics, College of Dentistry, Health Science Tower, PO Box 100435, University of Florida, Gainesville, FL 32610 0248, USA
J Prosthet Dent 90:241-6. 2003..Mechanical retention based on the surface topography is critical for the success of chairside repair of chipped or fractured ceramic prostheses with a composite... - Marginal gap repair with flowable resin-based compositesValeria V Gordan
Department of Operative Dentistry, University of Florida College of Dentistry, Gainesville, USA
Gen Dent 52:390-4. 2004..Dentin near the pulp chamber yielded consistently lower bond strength values than dentin located at the dentino-enamel junction. Bonding at the flowable resin/dentin interface showed the weakest bond and highest frequency of failure... - Four-year clinical evaluation of a self-etching primer and resin-based restorative materialValeria V Gordan
Department of Operative Dentistry, College of Dentistry, Health Science Center, University of Florida, Gainesville, FL 32610 0415, USA
Am J Dent 18:45-9. 2005..To evaluate the performance of a universal resin-based restorative material (Beautifil) in combination with a self-etching primer (Fluorobond) for posterior restorations... - Two-year clinical evaluation of repair versus replacement of composite restorationsValeria V Gordan
College of Dentistry, Department of Operative Dentistry, University of Florida, Gainesville, FL 32610 0415, USA
J Esthet Restor Dent 18:144-53; discussion 154. 2006..To investigate the effectiveness of alternative treatments to the replacement of resin-based composite (RBC) restorations through a prospective longitudinal cohort clinical study... - Effect of surface finishing and storage media on bi-axial flexure strength and microhardness of resin-based compositeValeria V Gordan
University of Florida, College of Dentistry, Department of Operative Dentistry, Gainesville, FL 32610 0415, USA
Oper Dent 28:560-7. 2003..Both alternative hypotheses were accepted. In addition, the Mylar finishing group, because of the resin-rich surface layer, yielded the lowest mean values of BFS and VHN... - Replacement of resin-based composite: evaluation of cavity design, cavity depth, and shade matchingValeria V Gordan
Department of Operative Dentistry, University of Florida, College of Dentistry, Health Science Center, PO Box 100415, Gainesville, Florida 32610, USA
Quintessence Int 33:273-8. 2002..The aim of this study was to evaluate the effect of different cavity designs, cavity depths, and shade matching on the dimensions of Class I resin-based composite preparations during replacement of the restoration... 
What do microtensile bond strength values of adhesives mean?Karl Johan Soderholm
Department of Restorative Dental Sciences, College of Dentistry, University of Florida, Gainesville, FL 32610, USA
J Adhes Dent 14:307-14. 2012....- Effect of size of defect on the repair strength of amalgamChiayi Shen
Department of Dental Biomaterials, College of Dentistry, University of Florida, Gainesville, FL 32610 0446, USA
Quintessence Int 38:e464-9. 2007..This study tested the hypothesis that the size of repair sites on amalgam restorations with mechanical undercuts on the repair surface would affect interfacial strength using a 3-point bending test... - Controlled release of chlorhexidine from UDMA-TEGDMA resinK J Anusavice
Department of Dental Biomaterials, College of Dentistry, University of Florida, PO Box 100446, 1600 SW Archer Road, Gainesville, FL 32610-0446, USA
J Dent Res 85:950-4. 2006..The higher level of filler loading reduced the degree of polymerization, leading to a greater loss of organic components and higher chlorhexidine release rates... - Effect of CaF2 content on rate of fluoride release from filled resinsK J Anusavice
Department of Dental Biomaterials, College of Dentistry, University of Florida, PO Box 100446, 1600 SW Archer Rd, Gainesville, FL 32610 0446, USA
J Dent Res 84:440-4. 2005..0 buffers was controlled by diffusion from disk surfaces and degeneration of the resin matrix, which exposed more CaF2 particle surface area... - Microtensile strength of composite bonded to hot-pressed ceramicsA Della Bona
Department of Dental Biomaterials, University of Florida, PO Box 100446, Gainesville, FL 32610 0446, USA
J Adhes Dent 2:305-13. 2000.... - Enamel hardness after exposure to acidic drinks and brushingSteven E Berry
Department of Prosthodontics, College of Dentistry, University of Florida in Gainesville, USA
Gen Dent 58:e116-21. 2010..Subsequent brushing could still cause detectable loss of enamel surface after multiple exposures... - Placement and replacement of restorations in general dental practice in IcelandI A Mjor
College of Dentistry, University of Florida, Gainesville 32610 0415, USA
Oper Dent 27:117-23. 2002..0001), while the diagnoses of discoloration and fracture of restorations increased with the clinicians' experience (p<0.0001)... - Relationships between skin temperature and temporal summation of heat and cold painAndre P Mauderli
Department of Neuroscience, University of Florida Colleges of Medicine and Dentistry, Gainesville, Florida 21610-0244, USA
J Neurophysiol 90:100-9. 2003..The magnitude of aching pain was well related to skin temperature and thus appeared to be established primarily by peripheral factors... - Effect of core and veneer thicknesses on the color parameters of two all-ceramic systemsTamer E Shokry
Department of Fixed Prosthodontics, Faculty of Dental Medicine, Al-Azhar University, Egypt
J Prosthet Dent 95:124-9. 2006..0003) but not on L* and a*. CONCLUSION: The color appearance of the layered ceramic disk specimens is strongly influenced not only by the core thickness and veneer thickness, but also by their interaction... - Work of adhesion of resin on treated lithia disilicate-based ceramicAlvaro Della Bona
School of Dentistry, The University of Passo Fundo, P O Box 611 613, Passo Fundo, RS, Brazil
Dent Mater 20:338-44. 2004..This study is to test the hypothesis that chemical etching and silane coating of a ceramic surface will influence the work of adhesion (WA) of adhesive resin to dental ceramic... - The influence of plasticizer loss on the viscoelasticity of temporary soft linersRaed K Aloul
Department of Restorative Sciences, University of Minnesota, Minneapolis, USA
J Prosthodont 11:254-62. 2002.... - Repair or replacement of amalgam restorations: decisions at a USA and a UK dental schoolJames C Setcos
Department of Biomaterials Science/Operative Dentistry and Endodontology, Turner Dental School, University of Manchester, Manchester, United Kingdom
Oper Dent 29:392-7. 2004..Conversely, the combined treatment decisions to "refurbish, repair and replace" were more frequently chosen in Florida than in Manchester...