Clare K Fitzpatrick

Summary

Affiliation: University of Denver
Country: USA

Publications

  1. doi request reprint Effects of resection thickness on mechanics of resurfaced patellae
    Clare K Fitzpatrick
    Center for Orthopedic Biomechanics, University of Denver, Denver, CO 80208, USA
    J Biomech 46:1568-75. 2013
  2. doi request reprint Relative contributions of design, alignment, and loading variability in knee replacement mechanics
    Clare K Fitzpatrick
    Computational Biomechanics Lab, University of Denver, 2390 S York Street, Denver, Colorado 80208, USA
    J Orthop Res 30:2015-24. 2012
  3. doi request reprint The role of patient, surgical, and implant design variation in total knee replacement performance
    Clare K Fitzpatrick
    Computational Biomechanics Lab, University of Denver, Denver, CO 80208, USA
    J Biomech 45:2092-102. 2012
  4. doi request reprint Development of a statistical shape model of the patellofemoral joint for investigating relationships between shape and function
    Clare K Fitzpatrick
    Computational Biomechanics Laboratory, University of Denver, Denver, CO 80208, USA
    J Biomech 44:2446-52. 2011
  5. doi request reprint Identifying alignment parameters affecting implanted patellofemoral mechanics
    Clare K Fitzpatrick
    Computational Biomechanics Lab, University of Denver, 2390 S York St, Denver, Colorado, USA
    J Orthop Res 30:1167-75. 2012
  6. pmc Mechanics of post-cam engagement during simulated dynamic activity
    Clare K Fitzpatrick
    Center for Orthopaedic Biomechanics, University of Denver, 2390 S York St, Denver, Colorado 80208, USA
    J Orthop Res 31:1438-46. 2013
  7. doi request reprint The influence of total knee arthroplasty geometry on mid-flexion stability: an experimental and finite element study
    Chadd W Clary
    Computational Biomechanics Lab, University of Denver, Denver, CO, USA
    J Biomech 46:1351-7. 2013
  8. doi request reprint Comparison of patellar bone strain in the natural and implanted knee during simulated deep flexion
    Clare K Fitzpatrick
    Computational Biomechanics Lab, University of Denver, Denver, Colorado, USA
    J Orthop Res 29:232-9. 2011
  9. doi request reprint Dynamic finite element knee simulation for evaluation of knee replacement mechanics
    Mark A Baldwin
    Computational Biomechanics Lab, University of Denver, Denver, CO 80208, USA
    J Biomech 45:474-83. 2012
  10. doi request reprint Control-matched computational evaluation of tendo-femoral contact in patients with posterior-stabilized total knee arthroplasty
    Heather E Hoops
    Computational Biomechanics Lab, Department of Mechanical and Materials Engineering, University of Denver, Denver, Colorado, USA
    J Orthop Res 30:1355-61. 2012

Collaborators

Detail Information

Publications14

  1. doi request reprint Effects of resection thickness on mechanics of resurfaced patellae
    Clare K Fitzpatrick
    Center for Orthopedic Biomechanics, University of Denver, Denver, CO 80208, USA
    J Biomech 46:1568-75. 2013
    ....
  2. doi request reprint Relative contributions of design, alignment, and loading variability in knee replacement mechanics
    Clare K Fitzpatrick
    Computational Biomechanics Lab, University of Denver, 2390 S York Street, Denver, Colorado 80208, USA
    J Orthop Res 30:2015-24. 2012
    ....
  3. doi request reprint The role of patient, surgical, and implant design variation in total knee replacement performance
    Clare K Fitzpatrick
    Computational Biomechanics Lab, University of Denver, Denver, CO 80208, USA
    J Biomech 45:2092-102. 2012
    ....
  4. doi request reprint Development of a statistical shape model of the patellofemoral joint for investigating relationships between shape and function
    Clare K Fitzpatrick
    Computational Biomechanics Laboratory, University of Denver, Denver, CO 80208, USA
    J Biomech 44:2446-52. 2011
    ..5 mm. The key results of the study are dually in the implementation of a novel approach linking statistical shape and finite element models and the relationships elucidated between PF articular geometry and mechanics...
  5. doi request reprint Identifying alignment parameters affecting implanted patellofemoral mechanics
    Clare K Fitzpatrick
    Computational Biomechanics Lab, University of Denver, 2390 S York St, Denver, Colorado, USA
    J Orthop Res 30:1167-75. 2012
    ..Understanding the relationships and design-specific dependencies between alignment parameters can aid preoperative planning, and help focus instrumentation design on those alignment parameters of primary concern...
  6. pmc Mechanics of post-cam engagement during simulated dynamic activity
    Clare K Fitzpatrick
    Center for Orthopaedic Biomechanics, University of Denver, 2390 S York St, Denver, Colorado 80208, USA
    J Orthop Res 31:1438-46. 2013
    ..This analysis guides selection and design of PS implants that facilitate smooth post-cam engagement and reduce edge loading of the post...
  7. doi request reprint The influence of total knee arthroplasty geometry on mid-flexion stability: an experimental and finite element study
    Chadd W Clary
    Computational Biomechanics Lab, University of Denver, Denver, CO, USA
    J Biomech 46:1351-7. 2013
    ..The FE model demonstrated sufficient sensitivity to appropriately differentiate kinematic changes due to subtle changes in implant design, and served as a useful pre-clinical design-phase tool to improve implant kinematics...
  8. doi request reprint Comparison of patellar bone strain in the natural and implanted knee during simulated deep flexion
    Clare K Fitzpatrick
    Computational Biomechanics Lab, University of Denver, Denver, Colorado, USA
    J Orthop Res 29:232-9. 2011
    ....
  9. doi request reprint Dynamic finite element knee simulation for evaluation of knee replacement mechanics
    Mark A Baldwin
    Computational Biomechanics Lab, University of Denver, Denver, CO 80208, USA
    J Biomech 45:474-83. 2012
    ..8 mm and 2.2° for PF and TF translations and rotations. The whole joint FE simulator described in this study can be applied to investigate a wide range of clinical and research questions...
  10. doi request reprint Control-matched computational evaluation of tendo-femoral contact in patients with posterior-stabilized total knee arthroplasty
    Heather E Hoops
    Computational Biomechanics Lab, Department of Mechanical and Materials Engineering, University of Denver, Denver, Colorado, USA
    J Orthop Res 30:1355-61. 2012
    ..By characterizing conditions that may lead to painful crepitus, the modeling approach supports clinicians by identifying pre-surgical indicators and important alignment parameters to control intraoperatively...
  11. doi request reprint Combined probabilistic and principal component analysis approach for multivariate sensitivity evaluation and application to implanted patellofemoral mechanics
    Clare K Fitzpatrick
    Computational Biomechanics Lab, Mechanical and Materials Engineering, University of Denver, Denver, CO, USA
    J Biomech 44:13-21. 2011
    ..The probabilistic and PCA approach has broad applicability to biomechanical analysis and can provide insight into the interdependencies between implant design, alignment and the resulting mechanics...
  12. doi request reprint A statistical finite element model of the knee accounting for shape and alignment variability
    Chandreshwar Rao
    Center for Orthopaedic Biomechanics, University of Denver, Denver, CO 80208, USA
    Med Eng Phys 35:1450-6. 2013
    ..By generating new 'virtual subjects' with physiologically realistic knee anatomy, the modeling approach can efficiently perform investigations into joint mechanics and implant design which benefit from population-based considerations. ..
  13. doi request reprint Influence of patellofemoral articular geometry and material on mechanics of the unresurfaced patella
    Clare K Fitzpatrick
    Computational Biomechanics Lab, University of Denver, 2390 S York St, Denver, CO 80208, USA
    J Biomech 45:1909-15. 2012
    ....
  14. doi request reprint Computationally efficient finite element evaluation of natural patellofemoral mechanics
    Clare K Fitzpatrick
    Department of Mechanical and Materials Engineering, Computational Biomechanics Laboratory, University of Denver, Denver, CO 80208, USA
    J Biomech Eng 132:121013. 2010
    ....