Detail Information
Publications
Extrusion pretreatment of pine wood chipsC Karunanithy
Agricultural and Biosystems Engineering Department, South Dakota State University, Brookings, SD, USA
Appl Biochem Biotechnol 167:81-99. 2012..7, 7.9, and 6.8 fold higher than the control (unpretreated pine chips). Furthermore, potential fermentation inhibitors such as furfural, hydroxyl methyl furfural, and acetic acid were not found in any of the treatment combinations...
Influence of extruder temperature and screw speed on pretreatment of corn stover while varying enzymes and their ratiosChinnadurai Karunanithy
Agricultural and Biosystems Engineering Department, South Dakota State University, Brookings, SD 57007, USA
Appl Biochem Biotechnol 162:264-79. 2010..This pretreatment condition resulted in 2.0, 1.7, and 2.0 times higher than the control sample using 1:4 cellulase and beta-glucosidase combination...
Effect of extruder parameters and moisture content of switchgrass, prairie cord grass on sugar recovery from enzymatic hydrolysisChinnadurai Karunanithy
Agricultural and Biosystems Engineering Department, South Dakota State University, 1400 North Campus Drive, Brookings, SD 57007, USA
Appl Biochem Biotechnol 162:1785-803. 2010..8% were recorded for PCG extruded at a screw speed of 50 rpm and a temperature of 50 degrees C with a moisture content of 25%. Glycerol and acetic acid were byproducts found in low concentration (0.02-0.18 g/L) for both biomass...
