- Laser-induced breakdown spectroscopy of steel: a comparison of univariate and multivariate calibration methodsChristopher B Stipe
Seattle University, Mechanical Engineering Department, Seattle, Washington 98122, USA
Appl Spectrosc 64:154-60. 2010..The performance of partial least squares is on par with using iron as an internal standard but has the key advantage that it can be applied to samples where the concentrations of all elements are unknown...
- Evaluation of laser-induced breakdown spectroscopy (LIBS) for measurement of silica on filter samples of coal dustChristopher B Stipe
Department of Mechanical Engineering, Seattle University, WA 98122, USA
Appl Spectrosc 66:1286-93. 2012....
- Soot particle disintegration and detection by two-laser excimer laser fragmentation fluorescence spectroscopyChristopher B Stipe
Mechanical Engineering Department, Seattle University, Seattle, Washington 98122 1090, USA
Appl Opt 44:6537-44. 2005..These results help define the regimes where photofragmentation fluorescence methods quantitatively measure total soot concentrations...
- Role of lubrication oil in particulate emissions from a hydrogen-powered internal combustion engineArthur L Miller
National Institute for Occupational Safety and Health, Spokane, Washington 99207 Mechanical Engineering Department, Seattle University, Seattle, Washington 98122, USA
Environ Sci Technol 41:6828-35. 2007..08 g h(-1), which is much lower than the emission rate of the original diesel engine. There was also evidence that less volatile elements, such as iron, self-nucleated to form nanoparticles, some of which survive the coagulation process...