Sheng Lin-Gibson

Summary

Affiliation: National Institute of Standards and Technology
Country: USA

Publications

  1. ncbi request reprint Synthesis and characterization of PEG dimethacrylates and their hydrogels
    Sheng Lin-Gibson
    Polymers Division, National Institute of Science and Technology, Gaithersburg, Maryland 20899 8543, USA
    Biomacromolecules 5:1280-7. 2004
  2. ncbi request reprint Combinatorial investigation of the structure-properties characterization of photopolymerized dimethacrylate networks
    Sheng Lin-Gibson
    Polymers Division, National Institute of Standards and Technology, Gaithersburg, MD 20899 8543, USA
    Biomaterials 27:1711-7. 2006
  3. doi request reprint Effects of filler type and content on mechanical properties of photopolymerizable composites measured across two-dimensional combinatorial arrays
    Sheng Lin-Gibson
    National Institute of Standards and Technology, Gaithersburg, MD 20899 8543, USA
    Acta Biomater 5:2084-94. 2009
  4. ncbi request reprint Systematic investigation of porogen size and content on scaffold morphometric parameters and properties
    Sheng Lin-Gibson
    Polymers Division, National Institute of Standards and Technology, Gaithersburg, Maryland 20899 8543, USA
    Biomacromolecules 8:1511-8. 2007
  5. pmc Synthesis and characterization of dimethacrylates containing quaternary ammonium functionalities for dental applications
    Joseph M Antonucci
    Polymers Division, National Institute of Standards and Technology, Gaithersburg, MD, USA
    Dent Mater 28:219-28. 2012
  6. ncbi request reprint X-ray microcomputed tomography for measuring polymerization shrinkage of polymeric dental composites
    Jirun Sun
    Polymers Division, National Institute of Standards and Technology, Gaithersburg, MD 20899 8543, USA
    Dent Mater 24:228-34. 2008
  7. pmc Modulus-driven differentiation of marrow stromal cells in 3D scaffolds that is independent of myosin-based cytoskeletal tension
    Sapun H Parekh
    Polymers Division, National Institute of Standards and Technology, 100 Bureau Drive, Gaithersburg, MD 20899 8543, USA
    Biomaterials 32:2256-64. 2011
  8. ncbi request reprint Tissue engineering scaffolds based on photocured dimethacrylate polymers for in vitro optical imaging
    Forrest A Landis
    Polymers Division, National Institute of Standards and Technology, Gaithersburg, Maryland 20899 8543, USA
    Biomacromolecules 7:1751-7. 2006
  9. ncbi request reprint Two-dimensional gradient platforms for rapid assessment of dental polymers: a chemical, mechanical and biological evaluation
    Nancy J Lin
    Polymers Division, National Institute of Standards and Technology, 100 Bureau Drive, Gaithersburg, MD 20899, USA
    Dent Mater 23:1211-20. 2007
  10. pmc 3D mapping of polymerization shrinkage using X-ray micro-computed tomography to predict microleakage
    Jirun Sun
    Polymers Division, National Institute of Standards and Technology, Gaithersburg, MD 20899 8543, USA
    Dent Mater 25:314-20. 2009

Collaborators

Detail Information

Publications30

  1. ncbi request reprint Synthesis and characterization of PEG dimethacrylates and their hydrogels
    Sheng Lin-Gibson
    Polymers Division, National Institute of Science and Technology, Gaithersburg, Maryland 20899 8543, USA
    Biomacromolecules 5:1280-7. 2004
    ..Preliminary rheology and uniaxial compression measurements showed varied mechanical response, and biocompatibility studies showed that cells are completely viable in both types of hydrogels after two weeks...
  2. ncbi request reprint Combinatorial investigation of the structure-properties characterization of photopolymerized dimethacrylate networks
    Sheng Lin-Gibson
    Polymers Division, National Institute of Standards and Technology, Gaithersburg, MD 20899 8543, USA
    Biomaterials 27:1711-7. 2006
    ..The ultimate reaction conversion and mechanical properties depended on both the co-monomer composition and cure time...
  3. doi request reprint Effects of filler type and content on mechanical properties of photopolymerizable composites measured across two-dimensional combinatorial arrays
    Sheng Lin-Gibson
    National Institute of Standards and Technology, Gaithersburg, MD 20899 8543, USA
    Acta Biomater 5:2084-94. 2009
    ..This combinatorial platform accelerates the screening of dental composites through the direct comparison of properties and processing conditions across the same sample...
  4. ncbi request reprint Systematic investigation of porogen size and content on scaffold morphometric parameters and properties
    Sheng Lin-Gibson
    Polymers Division, National Institute of Standards and Technology, Gaithersburg, Maryland 20899 8543, USA
    Biomacromolecules 8:1511-8. 2007
    ..The current study shows that the structure and properties of the scaffold could be tailored by the size and the amount of porogen used in the fabrication of the scaffold...
  5. pmc Synthesis and characterization of dimethacrylates containing quaternary ammonium functionalities for dental applications
    Joseph M Antonucci
    Polymers Division, National Institute of Standards and Technology, Gaithersburg, MD, USA
    Dent Mater 28:219-28. 2012
    ..Such monomers have the potential to copolymerize with other methacrylate monomers and produce antibacterial polymers...
  6. ncbi request reprint X-ray microcomputed tomography for measuring polymerization shrinkage of polymeric dental composites
    Jirun Sun
    Polymers Division, National Institute of Standards and Technology, Gaithersburg, MD 20899 8543, USA
    Dent Mater 24:228-34. 2008
    ..The main objective of this study was to assess the feasibility of using X-ray microcomputed tomography (microCT) as a viable technique for accurate measurements of composite volumetric changes due to polymerization...
  7. pmc Modulus-driven differentiation of marrow stromal cells in 3D scaffolds that is independent of myosin-based cytoskeletal tension
    Sapun H Parekh
    Polymers Division, National Institute of Standards and Technology, 100 Bureau Drive, Gaithersburg, MD 20899 8543, USA
    Biomaterials 32:2256-64. 2011
    ..These data show that increased hydrogel modulus enhanced osteogenic differentiation of hBMSCs in 3D scaffolds but that hBMSCs did not use the same mechanosensing pathways that have been identified in 2D culture...
  8. ncbi request reprint Tissue engineering scaffolds based on photocured dimethacrylate polymers for in vitro optical imaging
    Forrest A Landis
    Polymers Division, National Institute of Standards and Technology, Gaithersburg, Maryland 20899 8543, USA
    Biomacromolecules 7:1751-7. 2006
    ..Because the cross-linked polymer in the scaffolds is an amorphous glass, it was possible to optically image cells that were over 400 microm beneath the surface of the sample...
  9. ncbi request reprint Two-dimensional gradient platforms for rapid assessment of dental polymers: a chemical, mechanical and biological evaluation
    Nancy J Lin
    Polymers Division, National Institute of Standards and Technology, 100 Bureau Drive, Gaithersburg, MD 20899, USA
    Dent Mater 23:1211-20. 2007
    ....
  10. pmc 3D mapping of polymerization shrinkage using X-ray micro-computed tomography to predict microleakage
    Jirun Sun
    Polymers Division, National Institute of Standards and Technology, Gaithersburg, MD 20899 8543, USA
    Dent Mater 25:314-20. 2009
    ..g., C-factor and volume) on polymerization shrinkage and microleakage...
  11. pmc X-ray imaging optimization of 3D tissue engineering scaffolds via combinatorial fabrication methods
    Yanyin Yang
    Polymers Division, National Institute of Standards and Technology, Gaithersburg, MD 20899 8543, USA
    Biomaterials 29:1901-11. 2008
    ..Only two scaffold libraries were required to determine these minimum pI(2)DTEc percentages required for X-ray imaging, which demonstrates the efficiency of this new combinatorial approach for optimizing scaffold formulations...
  12. ncbi request reprint Quantification of cell response to polymeric composites using a two-dimensional gradient platform
    Nancy J Lin
    Polymers Division, National Institute of Standards and Technology, Gaithersburg, MD 20899 8543, USA
    Comb Chem High Throughput Screen 12:619-25. 2009
    ....
  13. doi request reprint Effect of polymer degree of conversion on Streptococcus mutans biofilms
    Alison M Kraigsley
    Polymers Division, National Institute of Standards and Technology, 100 Bureau Drive, Gaithersburg, MD 20899 8543, USA
    Macromol Biosci 12:1706-13. 2012
    ..e., biomass), and time- and leachable-dependent responses in others (i.e., metabolic activity). These results highlight the need for considering biofilm-material interactions when designing/evaluating new materials...
  14. doi request reprint In situ formation of silver nanoparticles in photocrosslinking polymers
    Ya Jun Cheng
    Polymers Division, National Institute of Standards and Technology, 100 Bureau Drive, Gaithersburg, Maryland 20899 8543, USA
    J Biomed Mater Res B Appl Biomater 97:124-31. 2011
    ....
  15. pmc The effect of 3D hydrogel scaffold modulus on osteoblast differentiation and mineralization revealed by combinatorial screening
    Kaushik Chatterjee
    Polymers Division, National Institute of Standards and Technology, Gaithersburg, MD, USA
    Biomaterials 31:5051-62. 2010
    ..This work presents a combinatorial method to screen biological response to 3D hydrogel scaffolds that more closely mimics the 3D environment experienced by cells in vivo...
  16. pmc Effects of sample preparation on bacterial colonization of polymers
    Diana N Zeiger
    Polymers Division, National Institute of Standards and Technology, Gaithersburg, Maryland 20899, USA
    Langmuir 26:2659-64. 2010
    ..Polymerization on untreated slides was selected as the preferred method of preparation due to minimal material transfer to the polymer and consistent, reproducible bacterial colonization...
  17. doi request reprint Combinatorial and high-throughput screening of biomaterials
    Carl G Simon
    Polymers Division, National Institute of Standards and Technology, 100 Bureau Dr, Gaithersburg, MD 29899, USA
    Adv Mater 23:369-87. 2011
    ..In conclusion, additional opportunities for combinatorial methods for biomaterials research are noted, including streamlined sample fabrication and characterization, appropriate and automated bioassays, and data analysis...
  18. pmc Osteoblast response to dimethacrylate composites varying in composition, conversion and roughness using a combinatorial approach
    Nancy J Lin
    Polymers Division, National Institute of Standards and Technology, 100 Bureau Drive, MS 8543, Gaithersburg, MD 20899 8543, USA
    Biomaterials 30:4480-7. 2009
    ..The combinatorial testing platform successfully quantified the effects of numerous material properties on several aspects of the osteoblast response...
  19. pmc Evaluation of dental composite shrinkage and leakage in extracted teeth using X-ray microcomputed tomography
    Diana N Zeiger
    Polymers Division, National Institute of Standards and Technology, Gaithersburg, MD 20899 8543, USA
    Dent Mater 25:1213-20. 2009
    ..Use X-ray microcomputed tomography (microCT), to test the hypothesis that composite shrinkage and sites of potential leakage in human teeth are non-uniformly distributed and depend on cavity geometry and C-factor...
  20. doi request reprint X-ray microcomputed tomography for the measurement of cell adhesionand proliferation in polymer scaffolds
    Shauna M Dorsey
    Polymers Division, National Institute of Standards and Technology, 100 Bureau Drive, Gaithersburg, MD 20899, USA
    Biomaterials 30:2967-74. 2009
    ..In sum, the results demonstrate the benefits and limitations of using microCT for 3D imaging and analysis of cell adhesion and proliferation in polymer scaffolds...
  21. doi request reprint The support of bone marrow stromal cell differentiation by airbrushed nanofiber scaffolds
    Wojtek Tutak
    Biosystems and Biomaterials Division, National Institute of Standards and Technology, Gaithersburg, MD 20899, USA
    Biomaterials 34:2389-98. 2013
    ..These results highlight the advantages and disadvantages of airbrushing versus electrospinning nanofiber scaffolds and demonstrate that airbrushed nanofiber scaffolds can support stem cell differentiation...
  22. doi request reprint Cooperative calcium phosphate nucleation within collagen fibrils
    Diana N Zeiger
    Polymers Division, American Dental Association Foundation, National Institute of Standards and Technology, Gaithersburg, Maryland 20899 8543, USA
    Langmuir 27:8263-8. 2011
    ....
  23. doi request reprint Characterization and optimization of RGD-containing silk blends to support osteoblastic differentiation
    Abby W Morgan
    Polymers Division, National Institute of Standards and Technology, 100 Bureau Drive, Gaithersburg, MD 20899 8543, USA
    Biomaterials 29:2556-63. 2008
    ..It was determined that 10mass% RGD-spidroin was necessary to improve film stability and to achieve osteoblast attachment and differentiation...
  24. pmc Nondestructive quantification of leakage at the tooth-composite interface and its correlation with material performance parameters
    Jirun Sun
    Polymers Division, National Institute of Standards and Technology, Gaithersburg, MD 20899, USA
    Biomaterials 30:4457-62. 2009
    ..3D imaging and image analysis provide insight to help understand the relations between leakage and material properties...
  25. pmc Exploring cellular contact guidance using gradient nanogratings
    Jirun Sun
    American Dental Association Foundation, Paffenbarger Research Center, 100 Bureau Drive, Gaithersburg, Maryland 20899 8546, United States, Department of Mechanical Engineering, University of Colorado at Boulder, Boulder, Colorado 80309 0427, United States, and Polymers Division, National Institute of Standards and Technology, 100 Bureau Drive, Gaithersburg, Maryland 20899 8543, United States
    Biomacromolecules 11:3067-72. 2010
    ..These gradient platforms allowed for the separation of surface chemistry and surface topography to provide insight into the mechanisms responsible for cell contact guidance on nanopatterned surfaces. ..
  26. doi request reprint Different kinetic pathways of early stage calcium-phosphate cluster aggregation induced by carboxylate-containing polymers
    Jing Ye
    Biomaterials Group, Material Measurement Laboratory, NIST, 100 Bureau Drive, Gaithersburg, Maryland 20899 8543, United States
    Biomacromolecules 14:3417-22. 2013
    ..More importantly, LLS provided information about the size and the structural evolution of CaP aggregates, which will help define the process of controlled biomineralization. ..
  27. ncbi request reprint Encapsulated chondrocyte response in a pulsatile flow bioreactor
    James A Cooper
    Polymers Division, National Institute of Standards and Technology, 100 Bureau Drive, Gaithersburg, MD 20899 8543, USA
    Acta Biomater 3:13-21. 2007
    ....
  28. ncbi request reprint In situ formation of blends by photopolymerization of poly(ethylene glycol) dimethacrylate and polylactide
    Kai Zhang
    Polymers Division, National Institute of Standards and Technology, Gaithersburg, Maryland 20899 8543, USA
    Biomacromolecules 6:1615-22. 2005
    ..The facile and rapid formation of PEGDMA/PLA blends by photopolymerization represents a simple and efficient approach to a class of biomaterials with a broad spectrum of properties...
  29. doi request reprint Effects of nanoparticle size and charge on interactions with self-assembled collagen
    Dongbo Wang
    Biosystems and Biomaterials Division, National Institute of Standards and Technology, 100 Bureau Drive, Gaithersburg, MD, 20899, USA
    J Colloid Interface Sci 417:244-9. 2014
    ..Here, utilizing the current insights from biomineralization, we hypothesize that the binding affinity of nanoparticles to self-assembled collagen fibers is size and surface charge dependent...
  30. doi request reprint Microstructure and mechanical properties of in situ Streptococcus mutans biofilms
    Michael S Waters
    Material Measurement Laboratory, National Institute of Standards and Technology, Gaithersburg, Maryland 20899, United States
    ACS Appl Mater Interfaces 6:327-32. 2014
    ..The biofilms behave like a weak gel with storage moduli higher than loss moduli. The simple but robust experimental technique presented here can easily be extended to other biofilm-material systems. ..