D K Tyler

Summary

Affiliation: National Physical Laboratory
Country: UK

Publications

  1. ncbi request reprint NPL secondary standard radionuclide calibrator. Syringe calibration factors for radionuclides used in nuclear medicine. National Physical Laboratory
    D K Tyler
    INPL, Teddington, Middlesex, UK
    Appl Radiat Isot 56:343-7. 2002
  2. ncbi request reprint Thorium in the workplace: results from a European-based measurement comparison project
    D K Tyler
    Centre for Ionising Radiation Metrology, National Physical Laboratory, Teddington, Middlesex, UK
    Radiat Prot Dosimetry 97:141-52. 2001
  3. ncbi request reprint Thorium in the workplace: the preparation and validation of comparison samples for a European-based measurement comparison project
    A V Harms
    Centre for Ionising Radiation Metrology, National Physical Laboratory, Teddington, Middlesex, UK
    Radiat Prot Dosimetry 97:137-9. 2001
  4. ncbi request reprint Nuclear data used in the analysis of thorium in the workplace
    S A Woods
    National Physical Laboratory Teddington, Middlesex, UK
    Radiat Prot Dosimetry 97:133-6. 2001
  5. ncbi request reprint Syringe calibration factors for the NPL Secondary Standard Radionuclide Calibrator for selected medical radionuclides
    D K Tyler
    Centre for Acoustics and Ionising Radiation, National Physical Laboratory, Teddington, Middlesex TW11 0LW, UK
    Appl Radiat Isot 59:367-72. 2003
  6. ncbi request reprint Comparison of strontium-89 solution sources in UK hospitals, 2003
    M J Woods
    Ionising Radiation Metrology Consultants Ltd, Teddington, Middlesex TW11 9PQ, UK
    Appl Radiat Isot 64:1375-9. 2006

Collaborators

Detail Information

Publications6

  1. ncbi request reprint NPL secondary standard radionuclide calibrator. Syringe calibration factors for radionuclides used in nuclear medicine. National Physical Laboratory
    D K Tyler
    INPL, Teddington, Middlesex, UK
    Appl Radiat Isot 56:343-7. 2002
    ..The results obtained were compared to those for glass vials and show the large errors that can be produced by ignoring these differences in container format...
  2. ncbi request reprint Thorium in the workplace: results from a European-based measurement comparison project
    D K Tyler
    Centre for Ionising Radiation Metrology, National Physical Laboratory, Teddington, Middlesex, UK
    Radiat Prot Dosimetry 97:141-52. 2001
    ..The discussion highlights those aspects which warrant closer and further attention...
  3. ncbi request reprint Thorium in the workplace: the preparation and validation of comparison samples for a European-based measurement comparison project
    A V Harms
    Centre for Ionising Radiation Metrology, National Physical Laboratory, Teddington, Middlesex, UK
    Radiat Prot Dosimetry 97:137-9. 2001
    ..The processes involved are discussed...
  4. ncbi request reprint Nuclear data used in the analysis of thorium in the workplace
    S A Woods
    National Physical Laboratory Teddington, Middlesex, UK
    Radiat Prot Dosimetry 97:133-6. 2001
    ..With particular reference to the problems associated with thorium analysis, some of the various sources of nuclear data are discussed and a recommended set of data is proposed...
  5. ncbi request reprint Syringe calibration factors for the NPL Secondary Standard Radionuclide Calibrator for selected medical radionuclides
    D K Tyler
    Centre for Acoustics and Ionising Radiation, National Physical Laboratory, Teddington, Middlesex TW11 0LW, UK
    Appl Radiat Isot 59:367-72. 2003
    ..This work has shown the need for the use of specifically derived syringe calibration factors as well as highlighting the complexity of the problem with regard to syringe types, procurement, etc...
  6. ncbi request reprint Comparison of strontium-89 solution sources in UK hospitals, 2003
    M J Woods
    Ionising Radiation Metrology Consultants Ltd, Teddington, Middlesex TW11 9PQ, UK
    Appl Radiat Isot 64:1375-9. 2006
    ..Work at NPL has resulted in correction factors for the NPL secondary standard radionuclide calibrator and for Capintec calibrators, which will produce a significant improvement in performance...