Yutaka Takahashi

Summary

Affiliation: Fukuoka Dental College
Country: Japan

Publications

  1. doi Fracture resistance of maxillary complete dentures subjected to long-term water immersion
    Yutaka Takahashi
    Division of Removable Prosthodontics, Fukuoka Dental College, Fukuoka, Japan
    Gerodontology 29:e1086-91. 2012
  2. doi Flexural properties of denture base resins subjected to long-term water immersion
    Yutaka Takahashi
    Division of Removable Prosthodontics, Fukuoka Dental College, Fukuoka, Japan
    Acta Odontol Scand 71:716-20. 2013
  3. doi Effect of thermal shock on mechanical properties of injection-molded thermoplastic denture base resins
    Yutaka Takahashi
    Division of Removable Prosthodontics, Fukuoka Dental College, Fukuoka, Japan
    Acta Odontol Scand 70:297-302. 2012
  4. ncbi Probability of failure of highly filled indirect resin-veneered implant-supported restorations: an in vitro study
    Yutaka Takahashi
    Division of Removable Prosthodontics, Department of Oral Rehabilitation, Fukuoka Dental College, Fukuoka 814 01, Japan
    Int J Prosthodont 15:179-82. 2002
  5. ncbi Effect of water storage on the impact strength of three glass fiber-reinforced composites
    Yutaka Takahashi
    Division of Removable Prosthodontics, Fukuoka Dental College, Fukuoka, Japan
    Dent Mater 22:291-7. 2006
  6. doi Effect of surface preparation on the failure load of a highly filled composite resin bonded to a denture base resin
    Hiroshi Shimizu
    Division of Removable Prosthodontics, Department of Oral Rehabilitation, Fukuoka Dental College, Fukuoka, Japan
    J Prosthodont 18:684-7. 2009
  7. ncbi Effect of surface preparation on the bond strength of heat-polymerized denture base resin to commercially pure titanium and cobalt-chromium alloy
    Tomohiro Kawaguchi
    Division of Removable Prosthodontics, Department of Oral Rehabilitation, Fukuoka Dental College, 2 15 1 Tamura, Sawara ku, Fukuoka 814 0193, Japan
    Dent Mater J 30:143-50. 2011
  8. doi Effect of surface preparation on the failure load of a highly filled composite bonded to the polymer-monomer matrix of a fiber-reinforced composite
    Hiroshi Shimizu
    Division of Removable Prosthodontics, Department of Oral Rehabilitation, Fukuoka Dental College, Fukuoka, Japan
    J Prosthodont 18:255-8. 2009
  9. doi Bonding of autopolymerizing acrylic resins to magnetic stainless steel alloys using metal conditioner
    Hiroshi Shimizu
    Division of Removable Prosthodontics, Department of Oral Rehabilitation, Fukuoka Dental College, Fukuoka, Japan
    J Dent 36:138-42. 2008
  10. doi Effect of surface preparation using ethyl acetate on the shear bond strength of repair resin to denture base resin
    Hiroshi Shimizu
    Division of Removable Prosthodontics, Department of Oral Rehabilitation, Fukuoka Dental College, Japan
    J Prosthodont 17:451-5. 2008

Collaborators

Detail Information

Publications47

  1. doi Fracture resistance of maxillary complete dentures subjected to long-term water immersion
    Yutaka Takahashi
    Division of Removable Prosthodontics, Fukuoka Dental College, Fukuoka, Japan
    Gerodontology 29:e1086-91. 2012
    ..This study investigated the fracture resistance of maxillary acrylic resin complete dentures subjected to long-term water immersion...
  2. doi Flexural properties of denture base resins subjected to long-term water immersion
    Yutaka Takahashi
    Division of Removable Prosthodontics, Fukuoka Dental College, Fukuoka, Japan
    Acta Odontol Scand 71:716-20. 2013
    ..The aim of this study was to investigate the flexural properties of denture base resins subjected to long-term water immersion...
  3. doi Effect of thermal shock on mechanical properties of injection-molded thermoplastic denture base resins
    Yutaka Takahashi
    Division of Removable Prosthodontics, Fukuoka Dental College, Fukuoka, Japan
    Acta Odontol Scand 70:297-302. 2012
    ..This study investigated the effect of thermal shock on the mechanical properties of injection-molded thermoplastic denture base resins...
  4. ncbi Probability of failure of highly filled indirect resin-veneered implant-supported restorations: an in vitro study
    Yutaka Takahashi
    Division of Removable Prosthodontics, Department of Oral Rehabilitation, Fukuoka Dental College, Fukuoka 814 01, Japan
    Int J Prosthodont 15:179-82. 2002
    ..The effect of the location of load application on the fracture resistance of the restorations was also studied...
  5. ncbi Effect of water storage on the impact strength of three glass fiber-reinforced composites
    Yutaka Takahashi
    Division of Removable Prosthodontics, Fukuoka Dental College, Fukuoka, Japan
    Dent Mater 22:291-7. 2006
    ..The effect of water sorption on the impact strengths of two pre-impregnated fiber-reinforced composites (FRCs) and one impregnated FRC were studied. All FRCs were available clinically...
  6. doi Effect of surface preparation on the failure load of a highly filled composite resin bonded to a denture base resin
    Hiroshi Shimizu
    Division of Removable Prosthodontics, Department of Oral Rehabilitation, Fukuoka Dental College, Fukuoka, Japan
    J Prosthodont 18:684-7. 2009
    ..The purpose of this study was to evaluate the effect of the surface preparation on the maximum fracture load value of a highly filled gingival shade composite resin bonded to a denture base resin...
  7. ncbi Effect of surface preparation on the bond strength of heat-polymerized denture base resin to commercially pure titanium and cobalt-chromium alloy
    Tomohiro Kawaguchi
    Division of Removable Prosthodontics, Department of Oral Rehabilitation, Fukuoka Dental College, 2 15 1 Tamura, Sawara ku, Fukuoka 814 0193, Japan
    Dent Mater J 30:143-50. 2011
    ..Before thermocycling SB and AL showed significantly higher shear bond strengths than SAND, RO, EP for both metals. The shear bond strength of AL group after thermocycling was significantly higher than that of the other groups...
  8. doi Effect of surface preparation on the failure load of a highly filled composite bonded to the polymer-monomer matrix of a fiber-reinforced composite
    Hiroshi Shimizu
    Division of Removable Prosthodontics, Department of Oral Rehabilitation, Fukuoka Dental College, Fukuoka, Japan
    J Prosthodont 18:255-8. 2009
    ..The purpose of the present study was to evaluate the effect of surface preparation on the maximum fracture load value of a highly filled composite bonded to the polymer-monomer matrix of a fiber-reinforced composite...
  9. doi Bonding of autopolymerizing acrylic resins to magnetic stainless steel alloys using metal conditioner
    Hiroshi Shimizu
    Division of Removable Prosthodontics, Department of Oral Rehabilitation, Fukuoka Dental College, Fukuoka, Japan
    J Dent 36:138-42. 2008
    ..The shear bond strengths of a barbituric acid derivative-activated autopolymerizing acrylic resin to two magnetic stainless steel alloys using a metal conditioner were investigated...
  10. doi Effect of surface preparation using ethyl acetate on the shear bond strength of repair resin to denture base resin
    Hiroshi Shimizu
    Division of Removable Prosthodontics, Department of Oral Rehabilitation, Fukuoka Dental College, Japan
    J Prosthodont 17:451-5. 2008
    ..This study evaluated the effect of using ethyl acetate as a surface preparation agent on the shear bond strength of repair resin to denture base resin...
  11. doi Effect of location of glass fiber-reinforced composite reinforcement on the flexural properties of a maxillary complete denture in vitro
    Yutaka Takahashi
    Division of Removable Prosthodontics, Fukuoka Dental College, Japan
    Acta Odontol Scand 69:215-21. 2011
    ..All of the reinforced dentures had higher FL-PL and lower flexural deflection than the denture without reinforcement...
  12. doi Effect of embedded metal reinforcements and their location on the fracture resistance of acrylic resin complete dentures
    Kaneyoshi Yoshida
    Division of Removable Prosthodontics, Fukuoka Dental College, Fukuoka, Japan
    J Prosthodont 20:366-71. 2011
    ..This study evaluated the effect of metal reinforcement and its location on the flexural load at the proportional limit (FL-PL) and the flexural deflection of maxillary acrylic resin complete dentures...
  13. ncbi Review of adhesive techniques used in removable prosthodontic practice
    Hiroshi Shimizu
    Division of Removable Prosthodontics, Department of Oral Rehabilitation, Fukuoka Dental College, Fukuoka, Japan
    J Oral Sci 54:205-11. 2012
    ..Careful consideration should be paid to stabilizing loosened teeth by fixing them with resin-bonded splints or fixed partial dentures...
  14. doi Mechanical properties of injection-molded thermoplastic denture base resins
    Ippei Hamanaka
    Division of Removable Prosthodontics, Fukuoka Dental College, Fukuoka, Japan
    Acta Odontol Scand 69:75-9. 2011
    ..To investigate the mechanical properties of injection-molded thermoplastic denture base resins...
  15. ncbi Failure probability of implant-supported restorations using highly filled all-composite crowns
    Hiroshi Shimizu
    Division of Removable Prosthodontics, Department of Oral Rehabilitation, Fukuoka Dental College, Fukuoka, Japan
    Quintessence Int 38:e374-8. 2007
    ....
  16. ncbi Mould filling of Ag-Pd-Cu-Au and Ag-Zn-Sn-In alloy castings made using a rapidly prepared gypsum-bonded investment material
    Hiroshi Shimizu
    Department of Oral Rehabilitation, Fukuoka Dental College, Fukuoka, Japan
    Eur J Prosthodont Restor Dent 16:177-80. 2008
    ..The mould filling of both alloys cast with the rapidly prepared gypsum-bonded investment material was superior to that using the conventional investment...
  17. ncbi Reinforcing effect of glass-fiber-reinforced composite on flexural strength at the proportional limit of denture base resin
    Fumitake Tsue
    Division of Removable Prosthodontics, Fukuoka Dental College, Fukuoka, Japan
    Acta Odontol Scand 65:141-8. 2007
    ..To evaluate the reinforcing effect of fiber-reinforced composite (FRC) on flexural strengths at the proportional limit (FS-PL) of a denture base resin...
  18. ncbi Recovery of one retention loss of retainers of fixed partial denture using overcasting restoration. Case report
    Hiroshi Shimizu
    Department of Oral Rehabilitation, Fukuoka Dental College, Japan
    N Y State Dent J 76:32-4. 2010
    ..A resin-bonded overcasting restoration has been functioning satisfactorily for more than 10 years...
  19. ncbi Resin-bonded castings with a cingulum rest seat and a guide plane for a removable partial denture: a case report
    Hiroshi Shimizu
    Division of Removable Prosthodontics, Department of Oral Rehabilitation, Fukuoka Dental College, Fukuoka, Japan
    Quintessence Int 39:e11-4. 2008
    ..The castings have been functioning for more than 11 years. The use of resin-bonded castings with cingulum rest seats for support and a guide plane to brace removable partial dentures is a successful method of treatment...
  20. ncbi Use of metal conditioner on reinforcement wires to improve denture repair strengths
    Hiroshi Shimizu
    Department of Oral Rehabilitation, Fukuoka Dental College, Japan
    N Y State Dent J 74:26-8. 2008
    ....
  21. ncbi Effect of surface preparation using ethyl acetate on the repair strength of denture base resin
    Hiroshi Shimizu
    Division of Removable Prosthodontics, Department of Oral Rehabilitation, Fukuoka Dental College, Fukuoka, Japan
    Acta Odontol Scand 64:159-63. 2006
    ..The objective of this study was to evaluate the effect of surface preparation using ethyl acetate on the repair strength of a denture base resin...
  22. ncbi Resin-bonded cast splints for loosened abutment teeth to anchor a removable partial denture: a case report
    Hiroshi Shimizu
    Department of Oral Rehabilitation, Fukuoka Dental College, Sawaraku, Fukuoka, Japan
    Eur J Prosthodont Restor Dent 17:22-5. 2009
    ..This technique can achieve sufficient stability of the abutment teeth and proper support and bracing of the removable partial denture with minimal intervention...
  23. ncbi Bonding of autopolymerizing denture base resin to cast Type IV gold alloy
    Hiroshi Shimizu
    Division of Removable Prosthodontics, Department of Oral Rehabilitation, Fukuoka Dental College, 2 15 1, Tamura, Sawaraku, Fukuoka 814 0193, Japan
    Am J Dent 21:323-6. 2008
    ..To evaluate the shear bond strengths of an autopolymerizing denture base resin to cast Type IV gold alloy using four metal conditioners...
  24. ncbi Effect of diameter of glass fibers on flexural properties of fiber-reinforced composites
    Motofumi Obukuro
    Division of Removable Prosthodontics, Fukuoka Dental College, Sawara ku, Fukuoka 814 0193, Japan
    Dent Mater J 27:541-8. 2008
    ..05). Therefore, it was revealed that the diameter of glass fibers significantly affected the flexural properties of fiber-reinforced composites...
  25. ncbi Resin-bonded overcasting to salvage a long-span fixed prosthesis: a clinical report
    Hiroshi Shimizu
    Division of Removable Prosthodontics, Department of Oral Rehabilitation, Fukuoka Dental College, Fukuoka, Japan
    J Prosthodont 17:420-2. 2008
    ....
  26. doi Influence of molecular weight of polymethyl(methacrylate) beads on the properties and structure of cross-linked denture base polymer
    Tomohiro Kawaguchi
    Department of Biomaterials Science, Institute of Dentistry, University of Turku, and BioCity Turku Biomaterials Research Program, Turku, Finland
    J Mech Behav Biomed Mater 4:1846-51. 2011
    ..The aim of this study was to investigate the influence of the molecular weight of the PMMA beads on the mechanical properties of cross-linked denture base polymers...
  27. doi An alternative procedure for fabricating a hollow interim obturator for a partial maxillectomy patient
    Hiroshi Shimizu
    Division of Removable Prosthodontics, Department of Oral Rehabilitation, Fukuoka Dental College, Fukuoka, Japan
    J Prosthodont 18:276-8. 2009
    ..These two portions are connected and adjusted in the patient's oral cavity. This technique is beneficial because it helps patients maintain good esthetics and their ability to speak, swallow, and chew just after surgery...
  28. doi Highly filled composite partial coverage restorations with lingual rest seats and guide planes for removable partial dentures
    Hiroshi Shimizu
    Division of Removable Prosthodontics, Department of Oral Rehabilitation, Fukuoka Dental College, Fukuoka, Japan
    J Prosthet Dent 99:73-4. 2008
  29. ncbi A resin-bonded overcasting with highly filled composite resin to salvage a broken metal-ceramic fixed partial denture: a case report
    Hiroshi Shimizu
    Division of Removable Prosthodontics, Department of Oral Rehabilitation, Fukuoka Dental College, Sawaraku, Japan
    J Calif Dent Assoc 37:115-7. 2009
    ..This resin-bonded overcasting has been functioning satisfactorily for more than nine years without any problems. The longevity of the fixed partial denture was enhanced through the use of this treatment...
  30. ncbi Shear bond strength of an autopolymerizing repair resin to injection-molded thermoplastic denture base resins
    Ippei Hamanaka
    Division of Removable Prosthodontics, Fukuoka Dental College, Fukuoka, Japan
    Acta Odontol Scand 71:1250-4. 2013
    ..This study investigated the shear bond strength of an autopolymerizing repair resin to injection-molded thermoplastic denture base resins...
  31. ncbi Tooth preparation design for anterior abutments of resin-bonded fixed partial dentures: a technical report
    Hiroshi Shimizu
    Department of Oral Rehabilitation, Fukuoka Dental College, Japan
    Gen Dent 55:426-8. 2007
    ..This design makes it possible to preserve the patient's innate occlusal function and to hold the retainer firmly by means of applied occlusal force...
  32. ncbi Students' opinion of a predoctoral implant training program
    Hirofumi Kido
    Section of Oral Implantology, Department of Oral Rehabilitation, Fukuoka Dental College, 2 15 1 Tamura, Sawara ku, Fukuoka, 814 0193, Japan
    J Dent Educ 73:1279-85. 2009
    ..These findings indicated that this training was effective in deepening student understanding of implant treatment...
  33. ncbi Prosthetic treatment for severe open bite malocclusion and loss of several teeth
    Hiroshi Shimizu
    N Y State Dent J 75:59-61. 2009
    ..The clinical follow-up indicated that the prosthetic procedure reported here is applicable for severe anterior and posterior open bite malocclusion...
  34. ncbi Anterior maxillary resin-bonded fixed partial denture to preserve occlusal surface area for anterior guidance. A clinical report
    Hiroshi Shimizu
    N Y State Dent J 73:28-30. 2007
    ..This article emphasizes the concept of fabricating an anterior maxillary resin-bonded fixed partial denture without reduction of the occlusal surface area for anterior guidance...
  35. ncbi Preparation for posterior partial veneered restoration to maintain vertical dimension of occlusion
    Hiroshi Shimizu
    Department of Oral Rehabilitation, Fukuoka Dental College, Japan
    N Y State Dent J 73:58-60. 2007
    ..At the same time, it minimizes the occlusal adjustment of the restorations. This preparation is especially designed for resin-bonded prostheses...
  36. doi Properties of injection-molded thermoplastic polyester denture base resins
    Ippei Hamanaka
    Division of Removable Prosthodontics, Fukuoka Dental College, Fukuoka, Japan
    Acta Odontol Scand 72:139-44. 2014
    ..This study investigated the properties of injection-molded thermoplastic polyester denture base resins...
  37. ncbi Retainer design for posterior resin-bonded fixed partial dentures: a technical report
    Hiroshi Shimizu
    Division of Removable Prosthodontics, Department of Oral Rehabilitation, Fukuoka Dental College, Fukuoka, Japan
    Quintessence Int 35:653-4. 2004
    ....
  38. ncbi Use of metal conditioners to improve bond strengths of autopolymerizing denture base resin to cast Ti-6Al-7Nb and Co-Cr
    Hiroshi Shimizu
    Division of Removable Prosthodontics, Department of Oral Rehabilitation, Fukuoka Dental College, 2 15 1 Tamura Sawara ku, Fukuoka 814 0193, Japan
    J Dent 34:117-22. 2006
    ..The shear bond strengths of an autopolymerizing denture base resin to cast Ti-6Al-7Nb and Co-Cr alloys using three metal conditioners were investigated...
  39. doi The root canal bonding of chemical-cured total-etch resin cements
    Mikako Hayashi
    Department of Restorative Dentistry and Endodontology, Osaka University Graduate School of Dentistry, Osaka, Japan
    J Endod 34:583-6. 2008
    ..Chemical-cured total-etch adhesive material showed stable bonding performances throughout the entire post space and thus has an advantage in post-core restorations...
  40. ncbi Flexural strength of In-Ceram alumina and In-Ceram zirconia core materials
    Kok Heng Chong
    Department of Biologic and Materials Sciences, Division of Prosthodontics, School of Dentistry, University of Michigan, Ann Arbor, Michigan 48109 1078, USA
    Int J Prosthodont 15:183-8. 2002
    ..The probability of failure of the two glass-infiltrated ceramic core materials was analyzed with and without lamination with Vitadur-alpha porcelain...
  41. ncbi Fracture resistance of pulpless teeth restored with post-cores and crowns
    Mikako Hayashi
    Department of Restorative Dentistry and Endodontology, Osaka University Graduate School of Dentistry, 1 8 Yamadaoka, Suita, Osaka 565 0871, Japan
    Dent Mater 22:477-85. 2006
    ..The present study was designed to test the null hypothesis that there is no difference in the fracture resistance of pulpless teeth restored with different types of post-core systems and full coverage crowns...
  42. ncbi Water sorption and dimensional stability of three glass fiber-reinforced composites
    John Chai
    Northwestern University, Chicago, USA
    Int J Prosthodont 17:195-9. 2004
    ..Two composites (Vectris, FibreKor) were resin impregnated industrially, and one composite (Stick) was polymer preimpregnated but required further manual impregnation...
  43. ncbi Effect of endodontic irrigation on bonding of resin cement to radicular dentin
    Mikako Hayashi
    Department of Restorative Dentistry and Endodontology, Osaka University Graduate School of Dentistry, 1 8 Yamadaoka, Suita, Osaka 565 0871, Japan
    Eur J Oral Sci 113:70-6. 2005
    ..The effects of endodontic irrigation on the bonding of resin cement to radicular dentin depended on the dentin bonding system used...
  44. ncbi Effect of water storage on the flexural properties of three glass fiber-reinforced composites
    John Chai
    Northwestern University, Evanston, Illinois, USA
    Int J Prosthodont 18:28-33. 2005
    ..The effect of water sorption on the flexural strength and flexural modulus of three fiber-reinforced composites was studied...
  45. ncbi Process and preliminary outcome of a patterns-of-care study of esophageal cancer in Japan: patients treated with surgery and radiotherapy
    Kotaro Gomi
    Department of Radiation Oncology, Cancer Institute Hospital, Japanese Foundation for Cancer Research, Tokyo, Japan
    Int J Radiat Oncol Biol Phys 56:813-22. 2003
    ..We present the preliminary results of surgery combined with RT with or without chemotherapy for thoracic esophageal cancer...
  46. ncbi Accurate mass measurement using multiple sprayer nano-electrospray mass spectrometry combined with nano-scale high-performance liquid chromatography on a magnetic sector instrument
    Yutaka Takahashi
    MS R and D Group, Analytical Instrument Division, JEOL Ltd, 3 1 2 Musashino, Akishima, Tokyo 196 0021, Japan
    J Chromatogr B Analyt Technol Biomed Life Sci 776:31-8. 2002
    ..Several standard compounds were examined and satisfactory accurate masses were obtained. Problems arising from differences in ionization efficiency between the sample and reference compounds were not observed...
  47. ncbi [Usefulness of hepatic arterial infusion chemotherapy using lecithin-added lipiodol emulsion in hepatocellular carcinoma]
    Shinjiro Kobayashi
    Department of Surgery, Institute of Gastroenterology, Tokyo Women s Medical University
    Gan To Kagaku Ryoho 34:1433-7. 2007
    ..This therapy allows fewer visits and provides a relatively substantial therapeutic effect while maintaining QOL, so it may serve as an effective treatment for highly advanced/multiple HCC not suited to other treatments...