Noel M Harrison

Summary

Publications

  1. doi request reprint Micromotion and friction evaluation of a novel surface architecture for improved primary fixation of cementless orthopaedic implants
    N Harrison
    Mechanical and Biomedical Engineering, National University of Ireland, Galway, Ireland
    J Mech Behav Biomed Mater 21:37-46. 2013
  2. doi request reprint Failure modelling of trabecular bone using a non-linear combined damage and fracture voxel finite element approach
    Noel M Harrison
    National Centre for Biomedical Engineering Science, National University of Ireland, Galway, Ireland
    Biomech Model Mechanobiol 12:225-41. 2013
  3. doi request reprint Comparison of trabecular bone behavior in core and whole bone samples using high-resolution modeling of a vertebral body
    Noel M Harrison
    National Centre for Biomedical Engineering Science, National University of Ireland, Galway, Ireland
    Biomech Model Mechanobiol 9:469-80. 2010
  4. doi request reprint An experimental and computational investigation of the post-yield behaviour of trabecular bone during vertebral device subsidence
    Nicola Kelly
    Department of Mechanical and Biomedical Engineering, National University of Ireland, Galway, Ireland
    Biomech Model Mechanobiol 12:685-703. 2013
  5. doi request reprint Heterogeneous linear elastic trabecular bone modelling using micro-CT attenuation data and experimentally measured heterogeneous tissue properties
    Noel M Harrison
    National Centre for Biomedical Engineering Science, National University of Ireland, Galway, Ireland Department of Mechanical and Biomedical Engineering, National University of Ireland, Galway, Ireland
    J Biomech 41:2589-96. 2008

Collaborators

Detail Information

Publications5

  1. doi request reprint Micromotion and friction evaluation of a novel surface architecture for improved primary fixation of cementless orthopaedic implants
    N Harrison
    Mechanical and Biomedical Engineering, National University of Ireland, Galway, Ireland
    J Mech Behav Biomed Mater 21:37-46. 2013
    ..These results demonstrate that OsteoAnchor has the potential to provide improved primary fixation for stem components in joint replacement operations...
  2. doi request reprint Failure modelling of trabecular bone using a non-linear combined damage and fracture voxel finite element approach
    Noel M Harrison
    National Centre for Biomedical Engineering Science, National University of Ireland, Galway, Ireland
    Biomech Model Mechanobiol 12:225-41. 2013
    ..Finally, the full accumulation of tissue damage and tissue fracture has been monitored from range of small magnitude (normal daily loading) through to specimen yielding, ultimate strength and post-ultimate strength softening...
  3. doi request reprint Comparison of trabecular bone behavior in core and whole bone samples using high-resolution modeling of a vertebral body
    Noel M Harrison
    National Centre for Biomedical Engineering Science, National University of Ireland, Galway, Ireland
    Biomech Model Mechanobiol 9:469-80. 2010
    ..Although computationally expensive, analysis of the entire vertebral body provided a full picture of in situ trabecular bone deformation...
  4. doi request reprint An experimental and computational investigation of the post-yield behaviour of trabecular bone during vertebral device subsidence
    Nicola Kelly
    Department of Mechanical and Biomedical Engineering, National University of Ireland, Galway, Ireland
    Biomech Model Mechanobiol 12:685-703. 2013
    ..In contrast, the use of von Mises, Drucker-Prager and Hill plasticity formulations for continuum trabecular bone models lead to over prediction of the subsidence force and plastic zone. ..
  5. doi request reprint Heterogeneous linear elastic trabecular bone modelling using micro-CT attenuation data and experimentally measured heterogeneous tissue properties
    Noel M Harrison
    National Centre for Biomedical Engineering Science, National University of Ireland, Galway, Ireland Department of Mechanical and Biomedical Engineering, National University of Ireland, Galway, Ireland
    J Biomech 41:2589-96. 2008
    ..This material property assignment method for computational models accurately reproduced the experimentally determined apparent modulus and concentrations of stress at locations of failure...