B Sassolas

Summary

Country: France

Publications

  1. ncbi Masking technique for coating thickness control on large and strongly curved aspherical optics
    B Sassolas
    , 7 Avenue Pierre de Coubertin 69100 Villeurbanne, France
    Appl Opt 48:3760-5. 2009
  2. ncbi Twin mirrors for laser interferometric gravitational-wave detectors
    Benoît Sassolas
    Laboratoire des Matériaux Avancés, CNRS IN2P3, 7 Avenue Pierre de Coubertin, 69622 Villeurbanne Cedex, France
    Appl Opt 50:1894-9. 2011
  3. ncbi Toward a new generation of low-loss mirrors for the advanced gravitational waves interferometers
    L Pinard
    Laboratoire des Matériaux Avancés CNRS IN2P3 VIRGO Building, 7, Avenue Pierre de Coubertin 69622, Villeurbanne Cedex France
    Opt Lett 36:1407-9. 2011

Collaborators

  • L Pinard
  • D Forest
  • R Flaminio
  • C Michel
  • A Lacoudre
  • J L Montorio
  • N Morgado

Detail Information

Publications3

  1. ncbi Masking technique for coating thickness control on large and strongly curved aspherical optics
    B Sassolas
    , 7 Avenue Pierre de Coubertin 69100 Villeurbanne, France
    Appl Opt 48:3760-5. 2009
    ..By using such a technique, it has been possible to deposit layers of tantalum pentoxide having a high thickness gradient onto a curved substrate 500 mm in diameter. Residual errors in the coating thickness profile are below 0.7%...
  2. ncbi Twin mirrors for laser interferometric gravitational-wave detectors
    Benoît Sassolas
    Laboratoire des Matériaux Avancés, CNRS IN2P3, 7 Avenue Pierre de Coubertin, 69622 Villeurbanne Cedex, France
    Appl Opt 50:1894-9. 2011
    ..This paper describes the realization and the characterization of the first twin large low-loss mirrors with transmissions differing by less than 0.01%...
  3. ncbi Toward a new generation of low-loss mirrors for the advanced gravitational waves interferometers
    L Pinard
    Laboratoire des Matériaux Avancés CNRS IN2P3 VIRGO Building, 7, Avenue Pierre de Coubertin 69622, Villeurbanne Cedex France
    Opt Lett 36:1407-9. 2011
    ..This Letter describes the way to reduce the ion beam sputtering coating absorption at 1064 nm and to improve the layer thickness uniformity in order to coat two large mirrors (diameter 35 cm) at the same time...