Jakub Siegel

Summary

Affiliation: Institute of Chemical Technology
Country: Czech Republic

Publications

  1. pmc Annealing of gold nanostructures sputtered on polytetrafluoroethylene
    Jakub Siegel
    Department of Solid State Engineering, Institute of Chemical Technology, Technicka 5, 166 28 Prague, Czech Republic
    Nanoscale Res Lett 6:588. 2011
  2. pmc Properties of gold nanostructures sputtered on glass
    Jakub Siegel
    Department of Solid State Engineering, Institute of Chemical Technology, Technicka 5, 166 28 Prague, Czech Republic
    Nanoscale Res Lett 6:96. 2011
  3. pmc Polytetrafluorethylene-Au as a substrate for surface-enhanced Raman spectroscopy
    Pavel Zvátora
    Department of Analytical Chemistry, Institute of Chemical Technology Prague, Technicka 5, 16628, Prague 6, Czech Republic
    Nanoscale Res Lett 6:366. 2011
  4. doi request reprint Nano-structured and functionalized surfaces for cytocompatibility improvement and bactericidal action
    Petr Slepicka
    Department of Solid State Engineering, University of Chemistry and Technology Prague, Technicka 5, Prague, Czech Republic Electronic address
    Biotechnol Adv 33:1120-9. 2015
  5. pmc "Soft and rigid" dithiols and Au nanoparticles grafting on plasma-treated polyethyleneterephthalate
    Vaclav Svorcik
    Department of Solid State Engineering, Institute of Chemical Technology, 16628 Prague, Czech Republic
    Nanoscale Res Lett 6:607. 2011

Collaborators

  • Vaclav Svorcik
  • Petr Slepicka
  • Zdeňka Kolská
  • Pavel Zvátora
  • Pavel Rezanka
  • Lucie Bacakova
  • Nikola Slepickova Kasalkova
  • Ondřej Kvítek
  • Kamil Záruba
  • Alena Rezníčková
  • Vladimir Kral
  • Vadym Prokopec

Detail Information

Publications6

  1. pmc Annealing of gold nanostructures sputtered on polytetrafluoroethylene
    Jakub Siegel
    Department of Solid State Engineering, Institute of Chemical Technology, Technicka 5, 166 28 Prague, Czech Republic
    Nanoscale Res Lett 6:588. 2011
    ..Gold coating leads to a decrease in the sample surface roughness. Annealing at 300°C of pristine PTFE and gold-coated PTFE results in significant increase of the sample surface roughness...
  2. pmc Properties of gold nanostructures sputtered on glass
    Jakub Siegel
    Department of Solid State Engineering, Institute of Chemical Technology, Technicka 5, 166 28 Prague, Czech Republic
    Nanoscale Res Lett 6:96. 2011
    ..With increasing layer thickness, the lattice parameter and the density approach the bulk values...
  3. pmc Polytetrafluorethylene-Au as a substrate for surface-enhanced Raman spectroscopy
    Pavel Zvátora
    Department of Analytical Chemistry, Institute of Chemical Technology Prague, Technicka 5, 16628, Prague 6, Czech Republic
    Nanoscale Res Lett 6:366. 2011
    ..Results showed that PTFE can be used for fabrication of SERS active substrate with easy handle properties at low cost. This substrate was sufficient for the measurement of SERS spectrum of BFD even at 10-8 mol/l concentration...
  4. doi request reprint Nano-structured and functionalized surfaces for cytocompatibility improvement and bactericidal action
    Petr Slepicka
    Department of Solid State Engineering, University of Chemistry and Technology Prague, Technicka 5, Prague, Czech Republic Electronic address
    Biotechnol Adv 33:1120-9. 2015
    ..Micro- and nano-patterned surfaces can be constructed as tissue scaffolds with specific functions regarding cell adhesion and proliferation or potential biosensor applications. ..
  5. pmc "Soft and rigid" dithiols and Au nanoparticles grafting on plasma-treated polyethyleneterephthalate
    Vaclav Svorcik
    Department of Solid State Engineering, Institute of Chemical Technology, 16628 Prague, Czech Republic
    Nanoscale Res Lett 6:607. 2011
    ..The gold nanoparticles are distributed relatively homogenously over the polymer surface...