G Leloup

Summary

Country: Belgium

Publications

  1. ncbi request reprint Fluoride release from glass-ionomer cements, compomers and resin composites
    G Vermeersch
    Department of Operative Dentistry, Dental School, Universite Catholique de Louvain, Brussels, Belgium
    J Oral Rehabil 28:26-32. 2001
  2. ncbi request reprint Meta-analytical review of factors involved in dentin adherence
    G Leloup
    Department of Operative Dentistry, Universite Catholique de Louvain, Brussels, Belgium
    J Dent Res 80:1605-14. 2001
  3. ncbi request reprint Raman scattering determination of the depth of cure of light-activated composites: influence of different clinically relevant parameters
    G Leloup
    Department of Operative Dentistry, Universite Catholique de Louvain, Bruxelles, Belgium
    J Oral Rehabil 29:510-5. 2002
  4. doi request reprint Photoinitiator type and applicability of exposure reciprocity law in filled and unfilled photoactive resins
    J G Leprince
    School of Dentistry and Stomatology, Universite Catholique de Louvain, Brussels, Belgium
    Dent Mater 27:157-64. 2011
  5. doi request reprint Benefits and limitations of adding hyperbranched polymers to dental resins
    M DeWaele
    Institute of Condensed Matter and Nanosciences Bio and Soft Matter, Universite Catholique de Louvain, Louvain la Neuve, Belgium
    J Dent Res 91:1178-83. 2012
  6. doi request reprint Investigating filler morphology and mechanical properties of new low-shrinkage resin composite types
    J Leprince
    School of Dentistry and Stomatology, Universite Catholique de Louvain, Brussels, Belgium
    J Oral Rehabil 37:364-76. 2010
  7. ncbi request reprint Antibacterial activity of glass-ionomer cements, compomers and resin composites: relationship between acidity and material setting phase
    G Vermeersch
    Department of Operative Dentistry, Dental School, Brussels, Belgium
    J Oral Rehabil 32:368-74. 2005
  8. doi request reprint Irradiation modes' impact on radical entrapment in photoactive resins
    J G Leprince
    School of Dentistry and Stomatology, Universite Catholique de Louvain, Brussels, Belgium
    J Dent Res 89:1494-8. 2010
  9. ncbi request reprint Treatment with removable partial dentures: a longitudinal study. Part I
    C Vanzeveren
    Department of Prosthetic Dentistry, Dental School, Universite Catholique de Louvain, Brussels, Belgium
    J Oral Rehabil 30:447-58. 2003
  10. ncbi request reprint Treatment with removable partial dentures: a longitudinal study. Part II
    C Vanzeveren
    Department of Prosthetic Dentistry, Dental School, Universite Catholique de Louvain, Brussels, Belgium
    J Oral Rehabil 30:459-69. 2003

Collaborators

Detail Information

Publications13

  1. ncbi request reprint Fluoride release from glass-ionomer cements, compomers and resin composites
    G Vermeersch
    Department of Operative Dentistry, Dental School, Universite Catholique de Louvain, Brussels, Belgium
    J Oral Rehabil 28:26-32. 2001
    ..The glass-ionomer composition (glass particles and polyacid's type, powder/liquid ratio) should have more influence on fluoride release than material type...
  2. ncbi request reprint Meta-analytical review of factors involved in dentin adherence
    G Leloup
    Department of Operative Dentistry, Universite Catholique de Louvain, Brussels, Belgium
    J Dent Res 80:1605-14. 2001
    ..Unfortunately, the substrate-related variables are more difficult to control, even though their influence is consistent...
  3. ncbi request reprint Raman scattering determination of the depth of cure of light-activated composites: influence of different clinically relevant parameters
    G Leloup
    Department of Operative Dentistry, Universite Catholique de Louvain, Bruxelles, Belgium
    J Oral Rehabil 29:510-5. 2002
    ..A significant reduction of the depth of cure is observed for all sample thickness of resin composite tested when using a light device with an intensity of 300 mW cm-2 as well as using a distance from the curing tip higher than 20 mm...
  4. doi request reprint Photoinitiator type and applicability of exposure reciprocity law in filled and unfilled photoactive resins
    J G Leprince
    School of Dentistry and Stomatology, Universite Catholique de Louvain, Brussels, Belgium
    Dent Mater 27:157-64. 2011
    ..To test the influence of photoinitiator type and filler particle inclusion on the validity of exposure reciprocity law...
  5. doi request reprint Benefits and limitations of adding hyperbranched polymers to dental resins
    M DeWaele
    Institute of Condensed Matter and Nanosciences Bio and Soft Matter, Universite Catholique de Louvain, Louvain la Neuve, Belgium
    J Dent Res 91:1178-83. 2012
    ..These results indicate that HBPs with modified end groups might be interesting substitutes for Bis-GMA/TEGDMA...
  6. doi request reprint Investigating filler morphology and mechanical properties of new low-shrinkage resin composite types
    J Leprince
    School of Dentistry and Stomatology, Universite Catholique de Louvain, Brussels, Belgium
    J Oral Rehabil 37:364-76. 2010
    ..Under high occlusal load, the use of Grandio and V34930 might be favoured. For small cavities, alternative technologies could be preferred as the need for mechanical resistance is lower and the potential for stress generation is greater...
  7. ncbi request reprint Antibacterial activity of glass-ionomer cements, compomers and resin composites: relationship between acidity and material setting phase
    G Vermeersch
    Department of Operative Dentistry, Dental School, Brussels, Belgium
    J Oral Rehabil 32:368-74. 2005
    ..Vitrebond GIC exhibited higher antibacterial action, probably because of a cytotoxic photo-initiator diphenyliodoniumchloride. A direct relationship between material acidity and growth inhibition of S. mutans was observed...
  8. doi request reprint Irradiation modes' impact on radical entrapment in photoactive resins
    J G Leprince
    School of Dentistry and Stomatology, Universite Catholique de Louvain, Brussels, Belgium
    J Dent Res 89:1494-8. 2010
    ..These results give new insights into the understanding of the photopolymerization process and highlight the relevance of using EPR when studying polymerization of dimethacrylate-based materials...
  9. ncbi request reprint Treatment with removable partial dentures: a longitudinal study. Part I
    C Vanzeveren
    Department of Prosthetic Dentistry, Dental School, Universite Catholique de Louvain, Brussels, Belgium
    J Oral Rehabil 30:447-58. 2003
    ....
  10. ncbi request reprint Treatment with removable partial dentures: a longitudinal study. Part II
    C Vanzeveren
    Department of Prosthetic Dentistry, Dental School, Universite Catholique de Louvain, Brussels, Belgium
    J Oral Rehabil 30:459-69. 2003
    ..2% of the maxillary abutments and for 85.8% of the mandibular abutments. For the 1089 other teeth, we observed the loss of 40 teeth and the appearance of caries or new fillings for 95 teeth. The fractures of cast clasps represent 3.4%...
  11. ncbi request reprint Interfacial layer characterization in dental composite
    D Truffier-Boutry
    Laboratoire de Chimie et de Physique des Hauts Polymères, Universite Catholique de Louvain, Louvain la Neuve, Belgium
    J Oral Rehabil 30:74-7. 2003
    ..In this case, a cohesive break occurs while an adhesive one is observed in all the other cases...
  12. ncbi request reprint Dynamic and static moduli of elasticity of resin-based materials
    J Sabbagh
    Department of Conservative Dentistry, School of Dentistry, Universite Catholique de Louvain, 15 Av Hippocrate, 1200 Brussels, Belgium
    Dent Mater 18:64-71. 2002
    ..The purpose of this study was to assess and compare the elastic moduli of 34 resin-based materials using a dynamic and a static method. The effect of water storage was also studied up to 6 months...
  13. ncbi request reprint Characterization of the inorganic fraction of resin composites
    J Sabbagh
    Department of Conservative Dentistry, School of Dentistry, Universite Catholique de Louvain, Louvain la Neuve, Belgium
    J Oral Rehabil 31:1090-101. 2004
    ..The silane treatment as well as the incorporation of organic material as part of the fillers of the composite could be responsible for those differences...