An LiSummaryAffiliation: University of Melbourne Country: Australia Publications
| Collaborators
|
Detail Information
Publications
Dual-LP11 mode 4×4 MIMO-OFDM transmission over a two-mode fiberAbdullah Al Amin
National ICT Australia and Centre for Energy Efficient Telecommunications CEET, Department of Electrical and Electronic Engineering, The University of Melbourne, Parkville, VIC 3010, Australia
Opt Express 19:16672-9. 2011..We achieve successful transmission of 35.3 Gb/s over 26-km two-mode fiber with less than 3 dB penalty...
Experimental demonstration of improved fiber nonlinearity tolerance for unique-word DFT-spread OFDM systemsXi Chen
Department of Electrical and Electronic Engineering, The University of Melbourne, VIC 3010, Australia
Opt Express 19:26198-207. 2011..Additionally, unique word aided phase estimation algorithm is proposed and demonstrated enabling extremely long OFDM symbol transmission...
Reception of mode-division multiplexed superchannel via few-mode compatible optical add/drop multiplexerXi Chen
Department of Electrical and Electronic Engineering, The University of Melbourne, VIC 3010, Australia
Opt Express 20:14302-7. 2012..The transmission of MDM superchannel CO-OFDM signals via the OADM is investigated. The experimental result shows that the OSNR penalties for add, drop and through ports are 2.6, 2.4, 0.7 dB, respectively for 3x318 Gb/s superchannels...
Transmission of 107-Gb/s mode and polarization multiplexed CO-OFDM signal over a two-mode fiberAn Li
National ICT Australia and Centre for Energy Efficient Telecommunications, Department of Electrical and Electronic Engineering, The University of Melbourne, Parkville, Vic, Australia
Opt Express 19:8808-14. 2011..5-km two-mode fiber. A mechanically-induced LP01/LP11 mode converter is used as the mode selective element in a spatial-mode multiplexed system...
