Pascal Magne

Summary

Affiliation: University of Southern California
Country: USA

Publications

  1. ncbi Immediate dentin sealing supports delayed restoration placement
    Pascal Magne
    Division of Primary Oral Health Care, University of Southern California, School of Dentistry, Los Angeles, CA 90089, USA
    J Prosthet Dent 98:166-74. 2007
  2. ncbi Influence of post-etching cleaning and connecting porcelain on the microtensile bond strength of composite resin to feldspathic porcelain
    Pascal Magne
    Division of Primary Oral Health Care, University of Southern California, School of Dentistry, Los Angeles, CA 90089 0641, USA
    J Prosthet Dent 96:354-61. 2006
  3. ncbi Incisor compliance following operative procedures: a rapid 3-D finite element analysis using micro-CT data
    Pascal Magne
    Division of Primary Oral Health Care, School of Dentistry, University of Southern California, Los Angeles, CA 90089 7792, USA
    J Adhes Dent 10:49-56. 2008
  4. ncbi Clinically based diagnostic wax-up for optimal esthetics: the diagnostic mock-up
    Harel Simon
    University of Southern California School of Dentistry, USA
    J Calif Dent Assoc 36:355-62. 2008
  5. ncbi Optical integration of incisoproximal restorations using the natural layering concept
    Pascal Magne
    Director of Esthetic Dentistry, Division of Primary Oral Health Care, University of Southern California, School of Dentistry, Los Angeles, California 90089 7792, USA
    Quintessence Int 39:633-43. 2008
  6. ncbi Fatigue resistance and failure mode of CAD/CAM composite resin implant abutments restored with type III composite resin and porcelain veneers
    Pascal Magne
    The Don and Sybil Harrington Foundation Chair of Esthetic Dentistry, Division of Restorative Sciences, The Herman Ostrow School of Dentistry, University of Southern California Los Angeles, CA 90089 7792, USA
    Clin Oral Implants Res 22:1275-81. 2011
  7. ncbi Efficient 3D finite element analysis of dental restorative procedures using micro-CT data
    Pascal Magne
    University of Southern California, Division of Primary Oral Health Care, School of Dentistry, 925 West 34th Street, DEN 4366, Los Angeles, CA 90089 0641, USA
    Dent Mater 23:539-48. 2007
  8. ncbi An esthetic solution for single-implant restorations - type III porcelain veneer bonded to a screw-retained custom abutment: a clinical report
    Pascal Magne
    Don and Sybil Harrington Foundation, Division of Primary Oral Health Care, School of Dentistry, University of Southern California, Los Angeles, CA 90089 7792, USA
    J Prosthet Dent 99:2-7. 2008
  9. ncbi Direct dentin bonding technique sensitivity when using air/suction drying steps
    Pascal Magne
    University of Southern California School of Dentistry, Division of Primary Oral Health Care, Los Angeles, CA 90089 7792, USA
    J Esthet Restor Dent 20:130-8; discussion 139-40. 2008
  10. ncbi CT scan-based finite element analysis of premolar cuspal deflection following operative procedures
    Pascal Magne
    Don and Sybil Harrington Foundation Chair of Esthetic Dentistry, School of Dentistry, University of Southern California, Los Angeles, California, USA
    Int J Periodontics Restorative Dent 29:361-9. 2009

Detail Information

Publications41

  1. ncbi Immediate dentin sealing supports delayed restoration placement
    Pascal Magne
    Division of Primary Oral Health Care, University of Southern California, School of Dentistry, Los Angeles, CA 90089, USA
    J Prosthet Dent 98:166-74. 2007
    ..It is not known whether it is still possible to obtain an efficient bond between the resin-coated dentin and the restoration after 2 to 4 months of placement of provisional restorations...
  2. ncbi Influence of post-etching cleaning and connecting porcelain on the microtensile bond strength of composite resin to feldspathic porcelain
    Pascal Magne
    Division of Primary Oral Health Care, University of Southern California, School of Dentistry, Los Angeles, CA 90089 0641, USA
    J Prosthet Dent 96:354-61. 2006
    ..Variations in bond strength between porcelain and composite resin might result from the different fabrication methods for porcelain restorations...
  3. ncbi Incisor compliance following operative procedures: a rapid 3-D finite element analysis using micro-CT data
    Pascal Magne
    Division of Primary Oral Health Care, School of Dentistry, University of Southern California, Los Angeles, CA 90089 7792, USA
    J Adhes Dent 10:49-56. 2008
    ..The data generated are compared to existing experimental data in an attempt to validate the model...
  4. ncbi Clinically based diagnostic wax-up for optimal esthetics: the diagnostic mock-up
    Harel Simon
    University of Southern California School of Dentistry, USA
    J Calif Dent Assoc 36:355-62. 2008
    ..This article reviews the applications and techniques for clinically based diagnostic wax-up, and focuses on the diagnostic mock-up philosophy as a means to obtain predictable esthetics and function...
  5. ncbi Optical integration of incisoproximal restorations using the natural layering concept
    Pascal Magne
    Director of Esthetic Dentistry, Division of Primary Oral Health Care, University of Southern California, School of Dentistry, Los Angeles, California 90089 7792, USA
    Quintessence Int 39:633-43. 2008
    ..To evaluate the optical integration of 4 contemporary composite resin materials used for incisoproximal restorations and the natural layering concept...
  6. ncbi Fatigue resistance and failure mode of CAD/CAM composite resin implant abutments restored with type III composite resin and porcelain veneers
    Pascal Magne
    The Don and Sybil Harrington Foundation Chair of Esthetic Dentistry, Division of Restorative Sciences, The Herman Ostrow School of Dentistry, University of Southern California Los Angeles, CA 90089 7792, USA
    Clin Oral Implants Res 22:1275-81. 2011
    ..This study assessed the fatigue resistance and failure mode of type III porcelain and composite resin veneers bonded to custom composite resin implant abutments...
  7. ncbi Efficient 3D finite element analysis of dental restorative procedures using micro-CT data
    Pascal Magne
    University of Southern California, Division of Primary Oral Health Care, School of Dentistry, 925 West 34th Street, DEN 4366, Los Angeles, CA 90089 0641, USA
    Dent Mater 23:539-48. 2007
    ..This investigation describes a rapid method for the generation of finite element models of dental structures and restorations...
  8. ncbi An esthetic solution for single-implant restorations - type III porcelain veneer bonded to a screw-retained custom abutment: a clinical report
    Pascal Magne
    Don and Sybil Harrington Foundation, Division of Primary Oral Health Care, School of Dentistry, University of Southern California, Los Angeles, CA 90089 7792, USA
    J Prosthet Dent 99:2-7. 2008
    ..The porcelain-to-porcelain adhesive approach was used instead of traditional principles of retention and resistance form of the abutment...
  9. ncbi Direct dentin bonding technique sensitivity when using air/suction drying steps
    Pascal Magne
    University of Southern California School of Dentistry, Division of Primary Oral Health Care, Los Angeles, CA 90089 7792, USA
    J Esthet Restor Dent 20:130-8; discussion 139-40. 2008
    ..Suction drying with a suction tip is a common alternative for moisture control, but data about the use of suction drying instead of the air syringe is scarce or nonexistent...
  10. ncbi CT scan-based finite element analysis of premolar cuspal deflection following operative procedures
    Pascal Magne
    Don and Sybil Harrington Foundation Chair of Esthetic Dentistry, School of Dentistry, University of Southern California, Los Angeles, California, USA
    Int J Periodontics Restorative Dent 29:361-9. 2009
    ....
  11. ncbi Thickness of CAD-CAM composite resin overlays influences fatigue resistance of endodontically treated premolars
    Pascal Magne
    Division of Primary Oral Health Care, School of Dentistry, University of Southern California, Los Angeles, CA 90089 7792, USA
    Dent Mater 25:1264-8. 2009
    ..Evaluate the influence of composite resin CAD-CAM restoration thickness on the in vitro fatigue resistance and failure mode of overlay-type restoration in endodontically treated premolars...
  12. ncbi Simulated fatigue resistance of composite resin versus porcelain CAD/CAM overlay restorations on endodontically treated molars
    Pascal Magne
    School of Dentistry, University of Southern California, Los Angeles, CA 90089, USA
    Quintessence Int 40:125-33. 2009
    ..To assess the influence of material selection (porcelain versus composite resin) for overlay-type restoration of endodontically treated molars and its effect on the in vitro fatigue resistance and failure mode...
  13. ncbi Use of additive waxup and direct intraoral mock-up for enamel preservation with porcelain laminate veneers
    Pascal Magne
    Primary Oral Health Care Division, University of Southern California School of Dentistry, Los Angeles, California 0089 0641, USA
    Eur J Esthet Dent 1:10-9. 2006
    ..Using this strategy, clinicians should be able to perform tooth preparations that are both more accurate and also higher in quality in an extremely time-efficient fashion compared with traditional methods...
  14. ncbi Adhesive restorations, centric relation, and the Dahl principle: minimally invasive approaches to localized anterior tooth erosion
    Pascal Magne
    Primary Oral Health Care Division, University of Southern California School of Dentistry, School of Dentistry Oral Health Center, Los Angeles, California, USA
    Eur J Esthet Dent 2:260-73. 2007
    ..This approach allows the ultraconservative treatment of localized anterior tooth erosion and wear...
  15. ncbi Interactions between impression materials and immediate dentin sealing
    Pascal Magne
    University of Southern California School of Dentistry, Oral Health Center, Los Angeles, CA 90089, USA
    J Prosthet Dent 102:298-305. 2009
    ..Immediate dentin sealing is a new strategy in which a dentin bonding agent is applied to freshly cut dentin and polymerized before making an impression. Interactions are suspected between the resin coating and the impression material...
  16. ncbi Selective masking for thin indirect restorations: can the use of opaque resin affect the dentine bond strength of immediately sealed preparations?
    Pascal Magne
    Don and Sybil Harrington Foundation, Department of Restorative Sciences, Herman Ostrow School of Dentistry, University of Southern California, United States
    J Dent 39:707-9. 2011
    ..Evaluate the dentine bond strength using different methods of application of opaque resins to mask dentine discoloration...
  17. ncbi Influence of material selection on the risk of inlay fracture during pre-cementation functional occlusal tapping
    Pascal Magne
    Department of Restorative Sciences, Herman Ostrow School of Dentistry, University of Southern California, Los Angeles 90089 7792, USA
    Dent Mater 27:109-13. 2011
    ..To evaluate in vitro the pre-cementation resistance of CAD/CAM inlays subjected to functional occlusal tapping...
  18. ncbi In vitro fatigue resistance of CAD/CAM composite resin and ceramic posterior occlusal veneers
    Pascal Magne
    University of Southern California, Herman Ostrow School of Dentistry of USC, Los Angeles, Calif, USA
    J Prosthet Dent 104:149-57. 2010
    ..Information regarding selection of the appropriate material and its influence on fatigue resistance, which may affect the longevity of the restoration, is missing...
  19. ncbi Virtual prototyping of adhesively restored, endodontically treated molars
    Pascal Magne
    University of Southern California, Herman Ostrow School of Dentistry, Los Angeles, CA, USA
    J Prosthet Dent 103:343-51. 2010
    ..Teeth and dental restorations are difficult to model because of their complex anatomical shape and layered structure...
  20. ncbi Fatigue resistance and failure mode of novel-design anterior single-tooth implant restorations: influence of material selection for type III veneers bonded to zirconia abutments
    Pascal Magne
    Division of Restorative Sciences, School of Dentistry, University of Southern California, 3151 S Hoover St, Los Angeles, CA 90089 7792, USA
    Clin Oral Implants Res 22:195-200. 2011
    ..This study assessed the fatigue resistance and failure mode of type III porcelain and composite resin veneers bonded to custom zirconia implant abutments...
  21. ncbi New zirconia primer improves bond strength of resin-based cements
    Pascal Magne
    Division of Restorative Sciences, School of Dentistry, Oral Health Center, University of Southern California, 3151 Hoover Street, Los Angeles, CA 90089, USA
    Dent Mater 26:345-52. 2010
    ..This study evaluated the effect of a new experimental primer, a mixture of organophosphate and carboxylic acid monomers, on the zirconia-to-resin shear bond strength (SBS)...
  22. ncbi Immediate dentin sealing: a fundamental procedure for indirect bonded restorations
    Pascal Magne
    Division of Primary Oral Health Care, University of Southern California School of Dentistry, Los Angeles, 90089, USA
    J Esthet Restor Dent 17:144-54; discussion 155. 2005
    ..A three-step total-etch DBA with a filled adhesive resin is recommended for this specific purpose. The major advantages, as well as the technical challenges of this procedure, are presented in detail...
  23. ncbi Influence of overlay restorative materials and load cusps on the fatigue resistance of endodontically treated molars
    Pascal Magne
    Don and Sybil Harrington Foundation Chair of Esthetic Dentistry, Division of Primary Oral Health Care, School of Dentistry, University of Southern California, Los Angeles, Californa 90089 7792, USA
    Quintessence Int 40:729-37. 2009
    ..To assess the influence of restorative materials and load cusps on the fatigue resistance of endodontically treated molars...
  24. ncbi Immediate dentin sealing improves bond strength of indirect restorations
    Pascal Magne
    Division of Primary Oral Health Care, University of Southern California, School of Dentistry, Los Angeles, CA 90089 0641, USA
    J Prosthet Dent 94:511-9. 2005
    ..Immediate dentin sealing (IDS) is a new approach in which dentin is sealed immediately following tooth preparation, before making the impression...
  25. ncbi Premolar cuspal flexure as a function of restorative material and occlusal contact location
    Pascal Magne
    University of Southern California, School of Dentistry, Los Angeles, California 90089 7792
    Quintessence Int 40:363-70. 2009
    ..To measure cuspal flexure of intact and restored maxillary premolars with different restorative materials and occlusal contacts...
  26. ncbi Effect Of Nd:YAG laser and CO2 laser treatment on the resin bond strength to zirconia ceramic
    Maria Paula Gandolfi Paranhos
    Division of Restorative Sciences, Herman Ostrow School of Dentistry, University of Southern California, Los Angeles, California 90089 7792, USA
    Quintessence Int 42:79-89. 2011
    ..this study evaluated the effect of surface treatments (Nd:YAG laser, CO2 laser, Al203 airborne-particle abrasion, and silica-coating) on the zirconia-to-resin shear bond strength (SBS)...
  27. ncbi Novel-design ultra-thin CAD/CAM composite resin and ceramic occlusal veneers for the treatment of severe dental erosion
    Luís Henrique Schlichting
    Division of Restorative Sciences, University of Southern California, Herman Ostrow School of Dentistry of USC, Los Angeles, CA, USA
    J Prosthet Dent 105:217-26. 2011
    ..There is a lack of data regarding selection of the most appropriate material and its influence on fatigue resistance, which may affect restoration longevity...
  28. ncbi Treatment of extended anterior crown fractures using Type IIIA bonded porcelain restorations
    Pascal Magne
    Division of Primary Oral Health Care, University of Southern California School of Dentistry, Los Angeles 90089-0641, USA
    J Calif Dent Assoc 33:387-96. 2005
    ....
  29. ncbi Risk of onlay fracture during pre-cementation functional occlusal tapping
    Pascal Magne
    Department of Restorative Sciences, Herman Ostrow School of Dentistry of USC, University of Southern California, Oral Health Center, Los Angeles, CA 90089 7792, USA
    Dent Mater 27:942-7. 2011
    ..To evaluate in vitro the pre-cementation resistance of CAD/CAM onlays subjected to functional occlusal tapping...
  30. ncbi Diagnostic mock-ups as an objective tool for predictable outcomes with porcelain laminate veneers in esthetically demanding patients: a clinical report
    Mamaly Reshad
    Department of Advanced Graduate Prosthodontics, University of Southern California, School of Dentistry, Los Angeles, CA 90089 0641, USA
    J Prosthet Dent 99:333-9. 2008
    ..The second is related to the actual clinical procedure. A direct mock-up technique is described which serves as an effective communication tool between the dentist, patient, and dental laboratory technician...
  31. ncbi Novel porcelain laminate preparation approach driven by a diagnostic mock-up
    Pascal Magne
    School of Dentistry, University of Southern California, Los Angeles 90089 0641, USA
    J Esthet Restor Dent 16:7-16; discussion 17-8. 2004
    ..CLINICAL SIGNIFICANCE: Using this new laminate porcelain preparation approach, clinicians should be able to produce not only more accurate preparations, but also higher-quality tooth preparations in a time-efficient fashion...
  32. ncbi Composite resins and bonded porcelain: the postamalgam era?
    Pascal Magne
    Division of Primary Oral Health Care, University of Southern California School of Dentistry, Los Angeles 90089-0641, USA
    J Calif Dent Assoc 34:135-47. 2006
    ..Important considerations about tooth preparation, matrix techniques, layering methods, immediate dentin sealing and base lining are presented...
  33. ncbi Diagnostic waxing transfer from diagnostic casts to soft tissue definitive casts
    Michel Magne
    Division of Primary Oral Health Care, University of Southern California Center for Dental Technology, University of Southern California, School of Dentistry, Los Angeles, CA 90089, USA
    J Prosthet Dent 100:70-1. 2008
  34. ncbi Custom-made removable implant analogs for soft-tissue casts
    Domenico Cascione
    Division of Primary Oral Health Care, University of Southern California, School of Dentistry, Los Angeles 90089-0641, USA
    J Prosthet Dent 95:399-400. 2006
  35. ncbi Rationalization of shape and related stress distribution in posterior teeth: a finite element study using nonlinear contact analysis
    Pascal Magne
    Department of Prosthodontics, School of Dental Medicine, University of Geneva, Switzerland
    Int J Periodontics Restorative Dent 22:425-33. 2002
    ..Additional computations demonstrated the essential role of enamel bridges and crests to protect the crown from harmful tensile stresses...
  36. ncbi Immediate dentin sealing of onlay preparations: thickness of pre-cured Dentin Bonding Agent and effect of surface cleaning
    Minos M Stavridakis
    Division of Cariology and Endodontology, School of Dentistry, University of Geneva, Switzerland
    Oper Dent 30:747-57. 2005
    ..Neither air abrasion nor polishing removed the entire layer thickness of the DBA in the majority of the cases...
  37. ncbi Porcelain versus composite inlays/onlays: effects of mechanical loads on stress distribution, adhesion, and crown flexure
    Pascal Magne
    Department of Prosthodontics, School of Dental Medicine, University of Geneva, Switzerland
    Int J Periodontics Restorative Dent 23:543-55. 2003
    ..Ceramic onlays/overlays seem to represent an effective answer to restore severely damaged posterior teeth...
  38. ncbi Modeling and characterization of the CEJ for optimization of esthetic implant design
    German O Gallucci
    Department of Prosthodontics, School of Dental Medicine, University of Geneva, Switzerland
    Int J Periodontics Restorative Dent 24:19-29. 2004
    ..Current implant design featuring a flat, rotation-symmetric shoulder should be reconsidered in view of natural CEJ contour to improve biologic considerations and related esthetics...
  39. ncbi Stress distribution of inlay-anchored adhesive fixed partial dentures: a finite element analysis of the influence of restorative materials and abutment preparation design
    Pascal Magne
    Department of Prosthodontics, School of Dental Medicine, University of Geneva, Geneva, Switzerland
    J Prosthet Dent 87:516-27. 2002
    ..Little information about the adequate restorative material and tooth preparation design for inlay-anchored AFPDs is available to the clinician...
  40. ncbi Anatomic crown width/length ratios of unworn and worn maxillary teeth in white subjects
    Pascal Magne
    Department of Prosthodontics, School of Dental Medicine, University of Geneva, Switzerland
    J Prosthet Dent 89:453-61. 2003
    ..Dimensions of teeth have been available for a century. Some significant and clinically relevant aspects of dental esthetics, however, such as the crown width/length ratios, have not been presented in tooth morphology sources until recently...
  41. ncbi Final impressions: a review of material properties and description of a current technique
    Nikolaos Perakis
    Department of Prosthodontics, School of Dental Medicine, University of Geneva, Switzerland
    Int J Periodontics Restorative Dent 24:109-17. 2004
    ..The one-step/double-mix impression using polyvinyl siloxane materials associated with a "double cord" gingival displacement is explained...